Lan Party config Gold - HFSC Shaper - Single WAN / LAN
-
tried out the config and it seems to be working…, many thanks!
some question(s) if you don't mind:
1. when I'm alone in the network..., ssh and gui access to pfSense seems fine..., but if there are 1,2 or more users in the network doing websurf and such..., my access to pfSense ssh and gui is too sluggish :( [seems that ssh and gui access is put in the qCatchAll queue?]…, how can I add/make/create a RULE/queue to make access to a pfSense box via ssh and gui without speed restrictions?
-
Because shaping works best when you shape the entire interface, I just use a separate admin interface(vlan) to access PFSense.
-
If you are using floating rules you should just choose WAN for all the interfaces. There is the LAN rule for accessing PFSense but it should not have an affect on shaping. You dont want to chose LAN for any floating rules , only WAN as PFSense will create the rule for the LAN interface.
-
thank you both for your replies
Because shaping works best when you shape the entire interface, I just use a separate admin interface(vlan) to access PFSense.
what if I don't have the luxury of having a VLAN?, dedicated physical LAN connection to my pfsense box and to my monitoring box?
If you are using floating rules you should just choose WAN for all the interfaces. There is the LAN rule for accessing PFSense but it should not have an affect on shaping. You dont want to chose LAN for any floating rules , only WAN as PFSense will create the rule for the LAN interface.
example,
if I apply the shaper in this attachment in the first post, access to pfsense gui == sluggish
if I remove the shaper, gui is smooth without problems :(AND this has quite confused me for a very long time and people will say that IT WILL NOT AFFECT LAN-to-LAN traffic :(
and then, I was thinking of having to create a sub queue below LAN with a name "unrestrictedLAN" with 990Mbits then created a floating rule something like {I chose LAN as the Interface} "lan net" with "any port" to "firewall" with "ssh port" and redirect to "unrestrictedLAN" and that rule is placed on the bottom of the floating rule…, LO and behold..., trafic does not go to "unrestrictedLAN"any tips if I only have 1 physical connection to my pfsense and monitoring box to have ssh and gui access smooth?
-
tried out the config and it seems to be working…, many thanks!
some question(s) if you don't mind:
1. when I'm alone in the network..., ssh and gui access to pfSense seems fine..., but if there are 1,2 or more users in the network doing websurf and such..., my access to pfSense ssh and gui is too sluggish :( [seems that ssh and gui access is put in the qCatchAll queue?]…, how can I add/make/create a RULE/queue to make access to a pfSense box via ssh and gui without speed restrictions?
The more or less official way is to create an "AdminPorts" alias then only allow "AdminUsers" (host/IP alias) to access the administrative ports of pfSense. Then you can create a queue and prioritize the AdminOnly traffic. This also improves security.
-
Will be making some changes to the config. I added some new ports and changed some other ports for some newer games. I will post up the zipped files you need at a later date.
-
Lately, I've gotten lazy and just use user/ip level caps on the network. Fortunately most of my LAN goers are pretty well behaved and it keeps any single person from being able to demolish the network.
Running a steam cache over the course of an event improved things a TON. Still having issues making Battlenet traffic efficient though.
I must say it is hilarious when people complain about bad pings then I show them that their torrent client is filling their small upload pipe.
-
Make sure to get your WAN IP(s) whitelisted with Blizzard well before your event (at least 4 weeks).
http://wcs.battle.net/sc2/en/about/community-tournaments
"Step 2: Get Whitelisted
In order to ensure the safety and security of Battle.net for all players, we have implemented mechanisms to detect and block specific IP addresses if too many connections are being made from a single source. This can occasionally cause problems for organized tournaments where many computers on a local network are all connected to the Internet using the same external IP address. Registering your tournament with Blizzard will allow us to add the IP addresses to the appropriate whitelist for the machines you intend to use for the duration of the tournament. If you’re running an on-site event that will have more than ten (10) people connecting at once from a limited range of IPs, send us an email with the subject Whitelist Request to tourneyinfo@blizzard.com and include detailed information about your event as well as your venue’s IP information."
-
We only had that issue once and an email resolved it.
All of our large local events have been organized by the LanFest org which probably has taken care of it before. -
Just realized that the pfsense 2.3 upgrade broke all the traffic shaping that was setup with sideouts original config. I saw his updated config for multi-wan connections. Is that able to be used?
-
I will work on doing a new config here and see about getting that posted up in the next day or two. Been busy with work stuff and RL stuff.
-
Here is a revision to the Lan Party config Gold - HFSC Shaper - Single WAN / LAN. Here are some notes on this revision:
1. Default rule is removed on LAN rules page and specific allows created.
2. Limiter is set to 1mbit / 500Kbit for TCP connections for unclassified TCP traffic. qInternet is 120Mbit on LAN and WAN is 6Mbit so adjust as needed.
3. DNS is blocked except coming from the PFSense box. If you use a cache server be sure to fix that or allow both of them.
4. The TCP allow LAN rule has a max state setting of 2000 per host. This should help prevent someone from running a torrent client and swapping you.
5. DNS is configured to use Level 3 and Google.
6. Separators have been added to rules.
7. Aliases have been expanded but you still might need to as some game ports in there in case I missed some. Will work on this again.
8. Password for this config is gr1mr3aper as you might need it for the system file. Be sure to change it please.Enjoy and test it out if you want and I will continue to work on it as time permits.
-
Have you got a new version.
Because i have got a problem with DNS
Thanks