Pfsense http antivirus proxy ( stopped )



  • Merhaba fortinet denen kan emiciden kurtulmak amacı ile tekrar çalışmalara başladım ancak daha başında havp su koyuverdi, hayallerim yıkıldı. Yeni kurulum yapan arkadaşlar varmı havp düzgün kurulmuyor pfsense http antivirus proxy ( stopped ) şekilde kalıyor. Bu konu ile ilgili değişik topicler inceledim ancak çözüm bulamadım değişik sürümler kurdum 2.0 i386 ondada aynı şuan kurduğum 2.2.4 amd64 birtürlü aktif edemedim. eski sürümlerde altta hata çıkıyor kurulmuyor silinmiyor. sadece havp kuruyorum squid vs. kurmadan daha en başta yapıyor bunu 2.2.4 te hatayı vermiyor kuruyor ancak çalışmıyor. eski sürümlerde verdiği hata

    No such file or directory in /usr/local/pkg/havp.inc on line 551

    bu hatayı kurarken veriyor kurulmuş gibi çıkıyor ancak kaldıramıyorsunuz. 2.2.4 te hata vermiyor herşey gayet normal gözüküyor ancak çalışmıyor. Ayarlar ile ilgili değil kesinlikle denemediğim ayar kalmadı. zaten makinede sadece havp kurulu :) işin başındayım. Bilgisi olan yardımcı olabilecek birisi varsa sevinirim.



  • Squid3 antivirüsü kullanabilmek için https://forum.pfsense.org/index.php?topic=88218.0

    linkte anlatımı mevcut ama ben bu şekilde çaıltıramadım.

    pf 2.2.4 64bit'te şu şekilde çalıştırabildim.

    Squid3 yüklendikten sonra aşağıdaki işlemleri yapınız.

    squid ayarlanızı yapınız

    mkdir /var/log/clamav/
    chown clamav /var/log/clamav/
    mkdir /var/db/clamav
    chown clamav /var/db/clamav/

    Services>Squid>Antivirus sekmesinden freshclam.conf bölümünü tamamen silip

    konfigurasyon ayarlarından aşağıdaki ayarları bulup değiştiriniz.

    squidclamav.conf içeriği

    When a virus is found then redirect the user to this URL

    redirect http://10.1.3.210/squid_clwarn.php (pfsense LAN ip adresi ne ise onunla değiştiriniz)

    c-icap.conf içeriği
    Manager:Apassword@ldap.chtsanti.net?o=chtsanti?mermberUid?(&(objectClass=posixGroup)(cn=%s)) (bu satırı bulup siliniz)

    Aşağıdaki satırı bulup Service squid_clamav squidclamav.so ekleyiniz

    Example:

    #  Service echo_service srv_echo.so
    Service squid_clamav squidclamav.so

    Putty den freshclam komutunu veriniz.

    Tekrar save edip squid restart ediniz ve deneyiniz.

    test için :
    http://www.eicar.org/download/eicar.com.txt



  • Merhaba öncelikle cevabınız için teşekkürler sizin yazdıklarınızı görmüştüm ancak tam olarak uygulamamıştım. ben havp kurarak virüs programı çalıştırmaya uğraştım hep. Cevabınızı görünce birde bu şekilde deneyelim dedim. Yazdıklarınızı kısmen uyguladım denedim kısmen uyguladım derken benim uyguladığım sürüm 2.2.4 amd64 bazı farklılıklar vardı sanırım adımları resimleri ile anlatayım.

    sqid3 ü kurdum stop konumdayken söylemiş olduğunuz

    mkdir /var/log/clamav/                                komutunu girdim ancak bende bu klasör zaten mevcuttu sanırım hata verdi

    chown clamav /var/log/clamav/                  çalıştı sorun yok

    mkdir /var/db/clamav                                  yine aynı komutu girdim ancak bende bu klasör zaten mevcuttu sanırım hata verdi

    chown clamav /var/db/clamav/                  çalıştı sorun yok

    dediğiniz antivirüs sayfasındaki değişiklikleri yapmaya çalıştım

    freshclam.conf dosyasını içini sayfa üzerinden temizledim
    squidclamav.conf http://x.x.x.x/squid_clwarn.php domain adı olan kısmı yani x.x.x.x olan yere pfsense local ipsini verdim

    c-icap.conf işte burada uyuşmazlık oldu

    Manager:Apassword@ldap.chtsanti.net?o=chtsanti?mermberUid?(&(objectClass=posixGroup)(cn=%s))      Bu satır bende yok

    Service echo_service srv_echo.so                      satırını bulup Service squid_clamav squidclamav.so ekledim altına

    save edip freshclam komutunu puty ile çalıştırdım

    ve son durum virüs programı çalıştı servislerde görünen !

    ICAP Inteface for Squid and ClamAV integration çalışmadı ancak virüslü sayfaya girmiyor uyarı veriyor icap hatası şeklinde.

    tabi bu yöntem biraz zorlama ile çalışmasını sağlıyor gibi geliyor bana pek taraftar değilim neden bu şekilde sorun çıkıyor şuan bu konu ile ilgili bir çalışma yapıyorlarmı acaba düzelecekmi bilemiyorum.


















  • Squid>Antivirus conf bölümünde

    c-icap.conf kısmını aşağıdaki kodla değiştirirmisiniz.
    Sizinkinin yedeğini alın derim.

    
    # This file contains the default settings for c-icap
    # 
    # 
    
    # TAG: PidFile
    # Format: PidFile pid_file
    # Description:
    #	The file to store the pid of the main process of the c-icap server.
    # Default:
    #	PidFile /var/run/c-icap/c-icap.pid
    PidFile /var/run/c-icap/c-icap.pid
    
    # TAG: CommandsSocket
    # Format: CommandsSocket socket_file
    # Description:
    #	The path of file to use as control socket for c-icap
    # Default:
    #	CommandsSocket /var/run/c-icap/c-icap.ctl
    CommandsSocket /var/run/c-icap/c-icap.ctl
    
    # TAG: Timeout
    # Format: Timeout seconds
    # Description:
    #	The time in seconds after which a connection without activity
    #	can be cancelled.
    # Default:
    #	Timeout 300
    Timeout 300
    
    # TAG: MaxKeepAliveRequests
    # Format: MaxKeepAliveRequests number
    # Description:
    #	The maximum number of requests can be served by one connection
    #	Set it to -1 for no limit
    # Default:
    #	MaxKeepAliveRequests 100
    MaxKeepAliveRequests 100
    
    # TAG: KeepAliveTimeout
    # Format: KeepAliveTimeout seconds
    # Description:
    #	The maximum time in seconds waiting for a new requests before a 
    #	connection will be closed.
    #	If the value is set to -1, there is no timeout.
    # Default:
    #	KeepAliveTimeout 600
    KeepAliveTimeout 600  
    
    # TAG: StartServers
    # Format: StartServers number
    # Description:
    #	The initial number of server processes. Each server process
    #	generates a number of threads, which serve the requests.
    # Default:
    #	StartServers 3
    StartServers 3
    
    # TAG: MaxServers
    # Format: MaxServers number
    # Description:
    #	The maximum allowed number of server processes.
    # Default:
    #	MaxServers 10
    MaxServers 10
    
    # TAG: MinSpareThreads
    # Format: MinSpareThreads number
    # Description:
    #	If the number of the available threads is less than number,
    #	the c-icap server starts a new child.
    # Default:
    #	MinSpareThreads     10
    MinSpareThreads     10
    
    # TAG: MaxSpareThreads
    # Format: MaxSpareThreads number
    # Description:
    #	If the number of the available threads is more than number then 
    #	the c-icap server kills a child.
    # Default:
    #	MaxSpareThreads     20
    MaxSpareThreads     20
    
    # TAG: ThreadsPerChild
    # Format:  ThreadsPerChild number
    # Description:
    #	The number of threads per child process.
    # Default:
    #	ThreadsPerChild     10
    ThreadsPerChild     10
    
    # TAG: MaxRequestsPerChild
    # Format: MaxRequestsPerChild number
    # Description:
    #	The maximum number of requests that a child process can serve.
    #	After this number has been reached, process dies. The goal of this
    #	parameter is to minimize the risk of memory leaks and increase the
    #	stability of c-icap. It can be disabled by setting its value to 0.
    # Default:
    #	MaxRequestsPerChild  0
    MaxRequestsPerChild  0
    
    # TAG: Port
    # Format: Port port
    # Description:
    #	The port number that the c-icap server uses to listen to requests.
    # Default:
    #	Port 1344
    Port 1344 
    
    # TAG: User
    # Format: User username
    # Description:
    #	The user owning c-icap's processes. By default, the owner is the
    #	user who runs the program.
    # Default:
    #	No value
    # Example:
    #	User wwwrun
    
    # TAG: Group
    # Format: Group groupname
    # Description:
    #	The group of users owning c-icap's processes, which, by default
    #	is the group of the current user.
    # Default:
    #	No value
    # Example:
    #	Group nogroup
    
    # TAG: ServerAdmin
    # Format: ServerAdmin admin_mail
    # Description:
    #	The Administrator of this server. Used when displaying information
    #	about this server (logs, info service, etc)
    # Default:
    #	No value
    ServerAdmin you@your.address
    
    # TAG: ServerName
    # Format: ServerName aServerName
    # Description:
    #	A name for this server. Used when displaying information about this
    #	server (logs, info service, etc)
    # Default:
    #	No value
    ServerName YourServerName
    
    # TAG: TmpDir
    # Format: TmpDir dir
    # Description:
    #	dir is the location of temporary files.
    # Default:
    #	TmpDir /var/tmp
    TmpDir /var/tmp
    
    # TAG: MaxMemObject
    # Format: MaxMemObject bytes
    # Description:
    #	The maximum memory size in bytes taken by an object which
    #	is processed by c-icap . If the size of an object's body is
    #	larger than the maximum size a temporary file is used.
    # Default:
    #	MaxMemObject 131072
    MaxMemObject 131072
    
    # TAG: DebugLevel
    # Format: DebugLevel level
    # Description:
    #	The level of debugging information to be logged.
    #	The acceptable range of levels is between 0 and 10.
    # Default:
    #	DebugLevel 0
    DebugLevel 0
    
    # TAG: Pipelining
    # Format: Pipelining on|off
    # Description:
    #	Enable or disable ICAP requests pipelining
    # Default:
    #	Pipelining on
    Pipelining on
    
    # TAG: SupportBuggyClients
    # FORMAT: SupportBuggyClients on|off
    # Description:
    #	Try to handle requests from buggy clients, for example ICAP requests
    #	missing "\r\n" sequences
    # Default:
    # SupportBuggyClients off
    SupportBuggyClients off
    
    # TAG: ModulesDir
    # Format: ModulesDir dir
    # Description:
    #	The location of modules
    # Default:
    #	ModulesDir /usr/local/lib/c_icap
    ModulesDir /usr/local/lib/c_icap
    
    # TAG: ServicesDir
    # Format: ServicesDir dir
    # Description:
    #	The location of services
    # Default:
    #	ServicesDir /usr/local/lib/c_icap
    ServicesDir /usr/local/lib/c_icap
    
    # TAG: TemplateDir
    # Format: TemplateDir dir
    # Description:
    #	The location of the text templates used by c-icap and its services,
    #	categorized by language and services/modules
    # Default:
    #	No value
    # Example:
    TemplateDir /usr/local/share/c_icap/templates/
    
    # TAG: TemplateDefaultLanguage
    # Format: TemplateDefaultLanguage lang
    # Description:
    #	Sets the default language to use for text templates
    # Default:
    #	TemplateDefaultLanguage en
    TemplateDefaultLanguage en
    
    #TemplateReloadTime 360
    #TemplateCacheSize 20
    #TemplateMemBufSize 8192
    
    # TAG: LoadMagicFile
    # Format: LoadMagicFile path
    # Description:
    #	Load a c-icap magic file. A magic file contains various 
    #	data type definitions. Look inside default c-icap.magic file
    #	for more informations.
    #	It can be used more than once to use multiple magic files.
    # Default:
    #	LoadMagicFile /usr/local/etc/c-icap/c-icap.magic
    LoadMagicFile /usr/local/etc/c-icap/c-icap.magic
    
    # TAG: RemoteProxyUsers
    # Format: RemoteProxyUsers onoff
    # Description:
    #	Set it to on if you want to use username provided by the proxy server.
    #	This is the recomended way to use users in c-icap.
    #	If the RemoteProxyUsers is off and c-icap configured to use users or
    #	groups the internal authentication mechanism will be used.
    # Default:
    #	RemoteProxyUsers off
    RemoteProxyUsers off
    
    # TAG: RemoteProxyUserHeader
    # Format: RemoteProxyUserHeader Header
    # Description:
    #	Used to specify the icap header used by the proxy server to send
    #	the authenticated client username to c-icap server 
    # Default:
    #	RemoteProxyUserHeader X-Authenticated-User
    RemoteProxyUserHeader X-Authenticated-User
    
    # TAG: RemoteProxyUserHeaderEncoded
    # Format: RemoteProxyUserHeaderEncoded onoff
    # Description:
    #	Set it to off if the RemoteProxyUserHeader is not base64 encoded
    # Default:
    #	RemoteProxyUserHeaderEncoded on
    RemoteProxyUserHeaderEncoded on
    
    # TAG: AuthMethod
    # Format: AuthMethod Method Authenticator
    # Description:
    #	Used to define the internal authentication mechanism to use. This
    #	feature is not well tested and may cause problems. It is better to use
    #	RemoteProxyUser configuration.
    #	Method is the authentication method to use (basic, digest, etc).
    #	Currently only basic authentication method is implemented as build in
    #	module
    #	Authenticator currently can only be "basic_simple_db"
    #	It can be considered as a user/password store and can be
    #	implemented as external module. The basic_simple_db is implemented as
    #	build it module
    # Default:
    #	No set
    # Example:
    #	AuthMethod basic basic_simple_db
    
    # TAG: basic.Realm
    # Format: basic.Realm ARealm
    # Description:
    #	Specify the basic method realm
    # Default:
    #	basic.Realm "Basic authentication"
    # Example:
    #	basic.Realm "c-icap server authentication"
    
    # TAG: basic_simple_db.UsersDB
    # Format: basic_simple_db.UsersDB LookupTable
    # Description:
    #	Specify the lookup table where the usernames/passwords pairs 
    #	are stored. The paswords must be unencrypted
    #	For more information about c-icap lookup tables read c-icap server
    #	manual page
    # Default:
    #	No value
    # Example:
    #	basic_simple_db.UsersDB hash:/usr/local/c-icap/etc/c-icap-users.txt
    
    # TAG: GroupSourceByGroup
    # Format: GroupSourceByGroup LookupTable
    # Description:
    #	Defines a lookup table where the groups of users are stored indexed
    #	by group. It can be used more than once.
    #	For more information about c-icap lookup tables read c-icap server
    #	manual page
    # Default:
    #	No set
    # Example:
    #	GroupSourceByGroup hash:/usr/local/c-icap/etc/c-icap-groups.txt
    
    # TAG: GroupSourceByUser
    # Format: GroupSourceByUser LookupTable
    # Description:
    #	Defines a lookup table where the groups of users are stored indexed 
    #	by user. It can be used more than once.
    #	For more information about c-icap lookup tables read c-icap server
    #	manual page
    # Default:
    #	No set
    # Example:
    #	GroupSourceByUser hash:/usr/local/c-icap/etc/c-icap-user-groups.txt
    
    # TAG: acl
    # Format: acl name type[{param}] value1 [value2] [...]
    # Description:
    #	Supported acl types are:
    #		acl aclname service service1 ...
    #		     The servicename
    #		acl aclname type OPTIONS|RESPMOD|REQMOD ...
    #		     The icap method
    #		acl aclname port port1 ...
    #		     The icap server port
    #		acl aclname src ip1/netmask1 ...
    #		     The client ip address
    #		acl aclname srvip ip1/netmask1 ...
    #		     The c-icap server ip address
    #		acl aclname icap_header{HeaderName} value1 ...
    #		     Matches the icap header HeaderName with value1 ...
    #		     The values are in regex form: /avalue/
    #		acl aclname icap_resp_header{HeaderName} value1 ...
    #		     The icap response header
    #		     The values are in regex form: /avalue/
    #		acl aclname http_req_header{HeaderName} value1 ...
    #		     The http request header
    #		     The values are in regex form: /avalue/
    #		acl aclname http_resp_header{HeaderName} value1 ...
    #		     The http response header
    #		     The values are in regex form: /avalue/
    #		acl aclname data_type type1 ...
    #		     The data type as recognized by the internal data type
    #		     recognizer. The types are defined in c-icap.magic file
    #		acl aclname auth username|* ...
    #		     The authenticated users. Using * instead of username means
    #		     all users.
    #		acl aclname group group1 ...
    #		     if the user of request belongs to given groups
    # Default:
    #	None set
    # Examples:
    #	acl OPTIONS type OPTIONS
    #	acl RESPMOD type RESPMOD
    #	acl REQMOD  type REQMOD
    #	acl ALLREQUESTS type OPTIONS RESPMOD REQMOD
    #	acl XHEAD icap_header{X-Test}  /value/
    #	acl ECHO service echo
    #	acl localnet src 192.168.1.0/255.255.255.0
    #	acl localhost src 127.0.0.1/255.255.255.255
    #	acl all src 0.0.0.0/0.0.0.0
    
    # TAG: icap_access
    # Format: icap_access allow|deny [!]acl1 ...
    # Description:
    #	Allowing or denying ICAP access based on defined access lists
    # Default:
    #	None set
    # Example:
    #	icap_access deny XHEAD
    #	#Allow OPTIONS method for all:
    #	icap_access allow localnet OPTIONS
    #	#Require authentication for all users from local network:
    #	icap_access allow AUTH localnet
    #	icap_access deny all
    
    # TAG: client_access
    # Format: client_access allow|deny acl1 [acl2] [...]
    # Description:
    #	Allowing or denying connections on c-icap based on
    #	defined access lists. Only the acl types src, srvip and port
    #	can be used.
    # Default:
    #	None set
    # Example:
    #	client_access allow all
    
    # TAG: LogFormat 
    # Format: LogFormat Name Format
    # Description:
    #	Name is a name for this log format.
    #	Format is a string with embedded % format codes. % format codes 
    #	has the following form:
    #	    % [-] [width] [{argument}] formatcode
    #	    if - is specified then the output is left aligned
    #	    if width specified then the field is exactly width size
    #	    some formatcodes support arguments given as {argument}
    #	
    #	Format codes:
    #	       %a:  Remote IP-Address
    #	       %la: Local IP Address
    #	       %lp: Local port
    #	       %>a: Http Client IP Address. Only supported if the proxy 
    #	       	    client supports the "X-Client-IP" header
    #	       %<a: http="" server="" ip="" address.="" only="" supported="" if="" the="" proxy<br="">#	       	    client supports the "X-Server-IP" header
    #	       %ts: Seconds since epoch
    #	       %tl: Local time. Supports optional strftime format argument
    #	       %tg: GMT time. Supports optional strftime format argument
    #	       %>ho: Modified Http request header. Supports header name
    #	       	     as argument. If no argument given the first line returned
    #	       %huo: Modified Http request url
    #	       %<ho: modified="" http="" reply="" header.="" supports="" header="" name<br="">#	       	     as argument. If no argument given the first line returned
    #	       %iu: Icap request url
    #	       %im: Icap method
    #	       %is: Icap status code
    #	       %>ih: Icap request header. Supports header name
    #	       	     as argument. If no argument given the first line returned
    #	       %<ih: icap="" response="" header.="" supports="" header="" name<br="">#	       	     as argument. If no argument given the first line returned
    #	       %Ih: Http bytes received
    #	       %Oh: Http bytes sent
    #	       %Ib: Http body bytes received
    #	       %Ob: Http body bytes sent
    #	       %I: Bytes received
    #	       %O: Bytes sent
    #	       %bph: The first 5 bytes of the body preview data. Non 
    #	       	     printable characters printed in hex form.
    #	       	     Supports the number of bytes to output as argument.
    #	       %un: Username
    #	       %Sl: Service log string
    #              %Sa: Attribute value set by service. The attribute name must 
    #                   given as argument.
    # Default:
    #	None set
    # Example:
    #	LogFormat myFormat "%tl, %a %im %iu %is %I %O %Ib %Ob %{10}bph" 
    
    # TAG: ServerLog
    # Format: ServerLog LogFile
    # Description:
    #	the file used by the build-in logger file_logger to 
    #	store debugging information, errors and other
    #	information about the c-icap server.
    # Default:
    #	ServerLog /var/squid/logs/c-icap-server.log
    ServerLog /var/squid/logs/c-icap-server.log
    
    # TAG: AccessLog
    # Format: AccessLog LogFile [LogFormat] [[!]acl1] [[!]acl2] [...]
    # Description:
    #	LogFile is a file where to log access information.
    #	LogFormat is the log format to use. If ommited c-icap uses:
    #	 	"%tl, %la %a %im %iu %is"
    #	Also acls can be used to select certain requests to be logged.
    #	This directive can be used more than once to specify more than
    #	one access log files
    # Default:
    #	AccessLog /var/squid/logs/c-icap-access.log
    # Example:
    #	AccessLog /var/squid/logs/c-icap-access.log MyFormat all
    AccessLog /var/squid/logs/c-icap-access.log
    
    # TAG: Logger
    # Format: Logger LoggerName
    # Description:
    #	Specify wich logger to use. By default uses the build in "file_logger" which
    #	uses files for access and server logging.
    # Default:
    #	Logger file_logger
    # Example:
    #	Logger sys_logger
    
    # TAG: Module
    # Format: Module Type ModuleFile
    # Description:
    #	Load an external module/plugin to c-icap.
    #	ModuleFile is the filename of the module. If no full path given then c-icap
    #	searche in path defined by the ModulesDir configuration parameter.
    #	Type is the type of the external module and can be one of the following:
    #	- "logger" for modules implement a logger
    #	- "common" for general purpose modules
    # Default:
    #	
    # Example:
    #	Module logger sys_logger.so
    
    # TAG: Service
    # Format: Service aName ServiceFile
    # Description:
    #	It loads the service ServiceFile. The argument aName used 
    #	as alias name for the service
    # Default:
    #	
    # Example:
    #	Service echo_service srv_echo.so
    Service squid_clamav squidclamav.so
    
    # TAG: ServiceAlias
    # Format: ServiceAlias AliasName ServiceName[?param1=value1¶m2=value2...]
    # Description:
    #	Used to define an alias name for a service.
    # Default:
    #	
    # Example:
    #	ServiceAlias avscan srv_clamav?allow204=on&sizelimit=off&mode=simple
    
    #
    # TAG: General configuration parameters for all services
    # Description:
    #	PreviewSize: The preview data size to advertise to the icap client
    #	MaxConnections: The client should not use more than MaxConnections
    #		for this service.
    #	TransferPreview: The list of file extensions, seperated by commas,
    #		for which the client should send preview data.
    #	TransferIgnore: The list of file extensions that should not be sent
    #		to the icap server
    #	TransferComplete: The list of file extensions that should be sent
    #		in their entirety, without preview, to the icap server
    #	OptionsTTL: The options ttl for the service. The "sec[s]", "min" or 
    #		"hour[s]" can be used to secify that the time is in seconds
    #		minutes or hours respectively. If no time-units given
    #		seconds are assumed.
    #	Allow206 on|off: Enable/disable advertise of 206 responses.
    #
    # Example:
    #	echo.PreviewSize 512
    #	echo.TransferIgnore gif, jpeg
    #	echo.OptionsTTL 3 min
    
    ######################################################
    # External modules comming with core c-icap server
    #
    # Module: echo
    # Description:
    #	Simple test service
    # Example:
    #	Service echo srv_echo.so
    Service echo srv_echo.so
    
    # Module: sys_logger
    # Description:
    #	Add support for logging access and server events to syslog server
    #	Use "Module" configuration parameter to load this module and "Logger"
    #	to make it default logger for the c-icap.
    # Example:
    #	Module logger sys_logger.so
    #	Logger sys_logger
    
    # TAG: sys_logger.Prefix
    # Format: sys_logger.Prefix string
    # Description:
    #	 string is be presented in every syslog message.
    # Default:
    #	sys_logger.Prefix "C-ICAP:"
    
    # TAG: sys_logger.Facility
    # Format: sys_logger.Facility daemon|user|local1|local2|local3|local4|local5|local6|local7
    # Description:
    #	specifies the facility type of syslog. 
    # Default:
    #	sys_logger.Facility daemon
    
    # TAG: sys_logger.access_priority
    # Format: sys_logger.access_priority alert|crit|debug|emerg|err|info|notice|warning
    # Description:
    #	determines  the  importance  of the access log message
    # Default:
    #	sys_logger.access_priority info
    
    # TAG: sys_logger.server_priority
    # Format: sys_logger.server_priority alert|crit|debug|emerg|err|info|notice|warning
    # Description:
    #	determines  the  importance  of the server log message
    # Default:
    #	sys_logger.server_priority crit
    
    # TAG: sys_logger.LogFormat
    # Format: sys_logger.LogFormat LOGFORMAT
    # Description:
    #	The log format to use. If no log format defined then 
    #	the following will be used:
    #	    "%la %a %im %iu %is"
    # Default:
    #	None set 
    # Example:
    #	Logformat BasicFormat "%la %a %im %iu %is"
    #	sys_logger.LogFormat BasicFormat
    
    # TAG: sys_logger.access
    # Format: sys_logger.access [!]acl1 ...
    # Description:
    #	Allow selecting ICAP requests to be logged using acls.
    #	By default all requests will be logged.
    # Default:
    #	None set
    # Example:
    #	sys_logger.access all
    
    # End module: sys_logger
    
    # Module: bdb_tables
    # Description:
    #	Add support for Berkeley DB based lookup tables. The format for 
    #	bdb path of the lookup table is:
    #		bdb:/path/to/bdb
    #	Use the c-icap-mkbdb utility to build Berkeley DB c-icap lookup tables
    # Example:
    #	Module common bdb_tables.so
    
    # End module: bdb_tables
    
    # Module: dnsbl_tables
    # Description:
    #	Add support for dns lookup tables. Can be used to access
    #	dns block lists. The dnsbl lookup table path definition is:
    #	    dnsbl:domainname
    #	For example the lookup table  for accessing the black.uribl.com
    #	dns black list is: 
    #	    dnsbl:black.uribl.com
    # Example:
    #	Module common dnsbl_tables.so
    
    # End module: dnsbl_tables
    
    # Module: ldap_module
    # Description:
    #	Add LDAP support to c-icap. The user can use LDAP based lookup tables
    #	using the following lookup table path:
    #	      ldap://[username:password@]ldapserver?base?attr1,attr2?filter[{[cache=no]}]
    #	The filter can contain the "%s" formating code which will be replaced by
    #	the search key
    #	Examples of supported ldap urls:
    #	     ldap://ldap.chtsanti.net?o=chtsanti?cn,uid?uid=%s
    #	     ldap://cn=Directory 
    #	
    #	WARNING: is not enough tested it may contain bugs!
    # Example:
    #	Module common ldap_module.so
    
    # End module: ldap_module[/s][/s]</ih:></ho:></a:>
    


  • teşekkürler bu şekilde çalıştı testlerini yapacağım



  • çok teşekkürler gayet iyi çalışıyor



  • Beni de baya uğraştırmıştı
    Çalıştığına sevindim


Log in to reply