Wireless AP and MAC filtering
-
Considering the lack of features my stance is appropriate. Yes static ARP sounds dandy but it doesn't seem to WORK. I've added all the MACs I require in the list and deny those that aren't. I've checked static ARP. ALL OF MY WIRELESS CLIENTS ARE USING STATIC IPS. They were COMPLETELY and UTTERLY UNABLE to associate with the AP after this static ARP thing.
As for setting the static IP desired along with the MAC in the list, I haven't done that. The reason being that the genius application tells me that I cannot add the IP because its "within the range of IPs". Duh its in the range of IPs for the wireless subnet! Isn't that the point!? So yes I haven't added the static IPs I use along with the MACs in the list due to this idiotic behavior. Perhaps if I can wrestle with the poor design I can get it to work you think?
I'll try that when I get some time to spend the mandatory hack time to get basic functionality to work on this platform.
-
Lack of features… I'm sorry if you cannot configure the features you have at hand....
Ok: just to be sure that i'm not dreaming: I've set up exactly what you want.
A wireless client with a static IP, and static ARP enabled, pfSense 1.2_release
It definitly does work.Do you know how ARP works?
The local machine (local IP) wants to communicate with another IP.
It does a broadcast on the MAC layer (FF:FF:FF:FF:FF:FF): "Who has this IP, answer please to 01:23:45:67:89:01".
If there is a computer around with this IP it will answer.
From this point on you have an entry for this IP in your ARP table.
The ARP table is nothing else than a list of MAC/IP pairs.Now the feature of static ARP is, that you write this list yourself.
After you enable static ARP, pfSense will no longer try to determine new MAC/IP pairs,
since it already has all the MAC/IP pairs it needs to know.
Meaning you HAVE to write the correct IP/MAC pairs into the list.This "idiotic behavior" you're experiencing is because you tried to assign an IP out of the range out of which your dynamic clients get IP's.
You cannot assign IP's out of this range statically. (Which makes sense if you think about it for a second).Jut set that range to something you dont use. (like x.x.x.253 - x.x.x.254)
-
I know exactly how ARP tables and how the protocol works, thank you. If you read my above post you'd realize that I cannot enter an IP along with the MAC because of what I call, idiotic behavior.
You seem to think I entered an IP outside the range, as if I didn't think of this already. Here is a screen shot to clarify that I am INDEED setting an IP WELL WITHIN THE RANGE and it STILL THROWS AN ERROR.
-
This "idiotic behavior" you're experiencing is because you tried to assign an IP out of the range out of which your dynamic clients get IP's.
You cannot assign IP's out of this range statically. (Which makes sense if you think about it for a second). -
As you can see by the screenshot I'm not assigning IPs OUTSIDE of the range. If you'd LOOK at the screenshot you'd see that its complaining about assigning an IP INSIDE THE RANGE. Is everyone here RETARDED?
-
Why are you so aggressive? What GruensFroeschli means is that it is not possible to assign an IP that is within this range!!! So, why don't you just try it with another IP? Maybe you first fix your English skills. People here in this forum want to help, but they are not just a customer service for enraged clients.
-
I'll put it in very easy words:
Your IP range: [192.168.2.1 to 192.168.2.254]
(assumed)pfSense: 192.168.2.1
Your DHCP range: [192.168.2.100 to 192.168.2.200]
allowed static entries: [192.168.2.2 to 192.168.2.99] and [192.168.2.201 to 192.168.2.254]
entry in screenshot: 192.168.2.109As you can see the entry in your screenshot is NOT in the allowed range.
-
I see. The problem is that the range given is the range of DHCP IPs. So I must use IPs not in the range specified when considering static IPs. I understand now. Your explanation was just what I needed. Thank you!
This is still a rather round-about way to provide MAC filtering but if it works I will take it. I will test when I get home from work.
-
Static entries below can still be provided via DHCP.
Just dont set a dynamic range.
Since you're using static MAC all clients have to be in the list. -
Alphis, its too hard to understand that if your client falls into the "dynamic range" it is a contradiction to have it into the "static arp entries" ?
If you want something to have static ARP, place him outside DHCP dynamic range !
duhhh !!!
