Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfBlockerNG v2.0 w/DNSBL

    pfBlockerNG
    192
    1.1k
    1.3m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dennypageD
      dennypage
      last edited by

      Much as I hate to dip into this, it should be pointed out that high level statements like this should be viewed as guidelines rather than absolute rules. The reason for this guideline is to help keep the number of rules under control. Depending upon the reputation lists you have and your de-dup settings, you may end up with about the name number of rules either way. If you care about efficiency, the appropriate thing to do is to compare the number of resulting rules and choose your approach based on the actual numbers.

      @doktornotor:

      Nooooooooooooooooooooooooooooo!!! Here we go again.

      Look. This is absolutely absurd. Use the Sweden as alias for the traffic source on the port-forwarding rule, instead of blocking the entire world. WTF.

      1 Reply Last reply Reply Quote 0
      • BBcan177B
        BBcan177 Moderator
        last edited by

        @superapan:

        I run a server, just a Mumble and a game server. I only wish them to be port-forwarded for IPs of my country (Sweden).

        See the following:
        https://forum.pfsense.org/index.php?topic=99987.msg572399#msg572399

        "Experience is something you don't get until just after you need it."

        Website: http://pfBlockerNG.com
        Twitter: @BBcan177  #pfBlockerNG
        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

        1 Reply Last reply Reply Quote 0
        • D
          doktornotor Banned
          last edited by

          @dennypage:

          If you care about efficiency, the appropriate thing to do is to compare the number of resulting rules and choose your approach based on the actual numbers.

          Sigh… If you care about efficiency, you do NOT ever create a rule containing tens of thousands of huge CIDRs for absolutely no reason, when the same job can be done by a whitelist rule with many many many orders of magnitude lower overhead, not wasting your RAM and CPU for nothing. Only pass/forward traffic that you want, instead of blocking everything else. The rest will be taken care of by the implicit default deny rule. Really take a while and think about what you are doing before creating absurd setups.

          1 Reply Last reply Reply Quote 0
          • dennypageD
            dennypage
            last edited by

            My point exactly.

            @doktornotor:

            Really take a while and think about what you are doing before creating absurd setups.

            1 Reply Last reply Reply Quote 0
            • P
              pfcode
              last edited by

              Hi,

              I got the second crash report today since upgraded to V2, the first one was at: https://forum.pfsense.org/index.php?topic=102470.msg575377#msg575377

              PHP Errors:
              PHP Fatal error:  Maximum execution time of 900 seconds exceeded in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 1663

              Release: pfSense 2.4.3(amd64)
              M/B: Supermicro A1SRi-2558F
              HDD: Intel X25-M 160G
              RAM: 2x8Gb Kingston ECC ValueRAM
              AP: Netgear R7000 (XWRT), Unifi AC Pro

              1 Reply Last reply Reply Quote 0
              • BBcan177B
                BBcan177 Moderator
                last edited by

                @pfcode:

                I got the second crash report today since upgraded to V2, the first one was at: https://forum.pfsense.org/index.php?topic=102470.msg575377#msg575377

                I had one other complain about this, but couldn't track down the issue. Send me an email and I will get some more details from you. Maybe its doing that during a Cron event and timing out on a download as the 900 seconds is the php cURL timeout limit.

                "Experience is something you don't get until just after you need it."

                Website: http://pfBlockerNG.com
                Twitter: @BBcan177  #pfBlockerNG
                Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                1 Reply Last reply Reply Quote 0
                • P
                  pfcode
                  last edited by

                  @BBcan177:

                  @pfcode:

                  I got the second crash report today since upgraded to V2, the first one was at: https://forum.pfsense.org/index.php?topic=102470.msg575377#msg575377

                  I had one other complain about this, but couldn't track down the issue. Send me an email and I will get some more details from you. Maybe its doing that during a Cron event and timing out on a download as the 900 seconds is the php cURL timeout limit.

                  Dont know what exactly was happening when the crash occurred. I login to the pfSense web GUI, Status: Dashboard, and saw there was a prompt on the top of the page saying there was a crash report and then I just submitted the report….

                  Release: pfSense 2.4.3(amd64)
                  M/B: Supermicro A1SRi-2558F
                  HDD: Intel X25-M 160G
                  RAM: 2x8Gb Kingston ECC ValueRAM
                  AP: Netgear R7000 (XWRT), Unifi AC Pro

                  1 Reply Last reply Reply Quote 0
                  • T
                    torsurfer
                    last edited by

                    Hi

                    I have an issue trying to get Squid to play nice with pfB DNSBL. My DNSBL is configured to use ports 8081 and 8441. And this is also properly reflected under the "NAT: Port Forward" where port 80 is forwarded to 8081 and port 443 to 8441 (for LAN interface).

                    However, Squid just won't seem to respect the Port Forward, hence, when the Resolver returns the IP 10.10.10.1 for an ad domain, Squid still insists to go out to 10.10.10.1:80 instead of 10.10.10.1:8081. The same applies to SSL connections i.e. it will use 443 instead of 8441.

                    I'm already using ports 80 and 443 (pfSense GUI, etc) for other usages. So I rather than not use these ports for DNSBL.

                    Do you have any ideas how I can get around this problem?

                    1 Reply Last reply Reply Quote 0
                    • D
                      doktornotor Banned
                      last edited by

                      @torsurfer:

                      I have an issue trying to get Squid to play nice with pfB DNSBL. My DNSBL is configured to use ports 8081 and 8441. And this is also properly reflected under the "NAT: Port Forward" where port 80 is forwarded to 8081 and port 443 to 8441 (for LAN interface).

                      However, Squid just won't seem to respect the Port Forward, hence, when the Resolver returns the IP 10.10.10.1 for an ad domain, Squid still insists to go out to 10.10.10.1:80 instead of 10.10.10.1:8081. The same applies to SSL connections i.e. it will use 443 instead of 8441.

                      "For LAN interface" is useless when the traffic is from localhost. Perhaps tick and select LAN and loopback under DNSBL - DNS Block List Configuration - DNSBL Firewall Rule.

                      1 Reply Last reply Reply Quote 0
                      • RonpfSR
                        RonpfS
                        last edited by

                        I noticed that when a download fail, the list is removed.

                        [ PRI3_DangerRulez ]	 Downloading update  . cURL Error: 28
Resolving timed out after 15567 milliseconds Retry in 5 seconds...
. cURL Error: 28
Resolving timed out after 15544 milliseconds Retry in 5 seconds...
. cURL Error: 28
Resolving timed out after 15580 milliseconds Retry in 5 seconds...
.. unknown http status code 

 [ pfB_PRI3 - PRI3_DangerRulez ] Download FAIL [ 12/02/15 19:29:38 ]
  Firewall and/or IDS are not blocking download.

The Following list has been REMOVED [ PRI3_DangerRulez ]

                        If the list existed before the update, it could be useful to have an option to keep and use the previous file until the next update succeed?

                        2.4.5-RELEASE-p1 (amd64)
                        Intel Core2 Quad CPU Q8400 @ 2.66GHz 8GB
                        Backup 0.5_5, Bandwidthd 0.7.4_4, Cron 0.3.7_5, pfBlockerNG-devel 3.0.0_16, Status_Traffic_Totals 2.3.1_1, System_Patches 1.2_5

                        1 Reply Last reply Reply Quote 0
                        • BBcan177B
                          BBcan177 Moderator
                          last edited by

                          @RonpfS:

                          If the list existed before the update, it could be useful to have an option to keep and use the previous file until the next update succeed?

                          Check the General Tab for that exact option :)  It should default to enable… Will have to check that...

                          "Experience is something you don't get until just after you need it."

                          Website: http://pfBlockerNG.com
                          Twitter: @BBcan177  #pfBlockerNG
                          Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                          1 Reply Last reply Reply Quote 0
                          • RonpfSR
                            RonpfS
                            last edited by

                            It is enabled  ;)

                            However it is not there at the end of the update.

                            I did a reload at the end and it uploaded the list fine.

                            [UpdateLog 20151202.txt](/public/imported_attachments/1/UpdateLog 20151202.txt)

                            2.4.5-RELEASE-p1 (amd64)
                            Intel Core2 Quad CPU Q8400 @ 2.66GHz 8GB
                            Backup 0.5_5, Bandwidthd 0.7.4_4, Cron 0.3.7_5, pfBlockerNG-devel 3.0.0_16, Status_Traffic_Totals 2.3.1_1, System_Patches 1.2_5

                            1 Reply Last reply Reply Quote 0
                            • BBcan177B
                              BBcan177 Moderator
                              last edited by

                              @RonpfS:

                              It is enabled  ;)

                              I think the DangerRulz "State" needs to be set to "Flex"… If it was never downloaded in the first place, then there is nothing to restore... Some others seem to be failing also. Try those URLs in a browser tab and see if it works from there... If those DNSBL feeds still fail, send me the URLs, as the parser might have to be updated if those lists are formatted differently.

                              nb- please edit your post and put the log into a code format... There is a "#" icon in the Message editor... It makes reading posts a lot cleaner...

                              "Experience is something you don't get until just after you need it."

                              Website: http://pfBlockerNG.com
                              Twitter: @BBcan177  #pfBlockerNG
                              Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                              1 Reply Last reply Reply Quote 0
                              • RonpfSR
                                RonpfS
                                last edited by

                                I did but I probably copied over the [ /code] end, or 3000 lines was too much  :o
                                I edited and put a attachment file instead

                                DangerRulz was downloaded many times before.

                                2.4.5-RELEASE-p1 (amd64)
                                Intel Core2 Quad CPU Q8400 @ 2.66GHz 8GB
                                Backup 0.5_5, Bandwidthd 0.7.4_4, Cron 0.3.7_5, pfBlockerNG-devel 3.0.0_16, Status_Traffic_Totals 2.3.1_1, System_Patches 1.2_5

                                1 Reply Last reply Reply Quote 0
                                • T
                                  torsurfer
                                  last edited by

                                  @doktornotor:

                                  "For LAN interface" is useless when the traffic is from localhost. Perhaps tick and select LAN and loopback under DNSBL - DNS Block List Configuration - DNSBL Firewall Rule.

                                  I do have the LAN and loopback selected under the DNSBL Firewall Rule. This only ensures that the firewall doesn't prevent LAN and loopback from accessing the DNSBL VIP. It won't, however, 'make' Squid go to port 8081 for a blacklisted domain.

                                  I think a solution to this problem might be the use of a reverse proxy, which I'd have to look into to see if it's possible. But thanks Doc for your comment.

                                  1 Reply Last reply Reply Quote 0
                                  • D
                                    doktornotor Banned
                                    last edited by

                                    @torsurfer:

                                    I think a solution to this problem might be the use of a reverse proxy, which I'd have to look into to see if it's possible. But thanks Doc for your comment.

                                    I think that will produce one giant kaboom, but whatever… You should rather look into NAT firewall rules with "This firewall" as source.

                                    1 Reply Last reply Reply Quote 0
                                    • T
                                      torsurfer
                                      last edited by

                                      @doktornotor:

                                      @torsurfer:

                                      I think a solution to this problem might be the use of a reverse proxy, which I'd have to look into to see if it's possible. But thanks Doc for your comment.

                                      I think that will produce one giant kaboom, but whatever… You should rather look into NAT firewall rules with "This firewall" as source.

                                      Yeah, it involves some manual settings in lighttpd conf files to enable reverse proxy for 80 -> 8081 and 443 -> 8441. The settings will survive reboots, but won't survive any 'Save' done via the GUI. Still, it hasn't quite kaboom on me.  ;D But definitely not preferable.

                                      Re: NAT firewall rules. Unless there's something there at the NAT rules where it allows me to choose Localhost as the Interface, nothing that I've tinkered with so far has any effect on Squid. But thanks for the idea, Doc.

                                      Edit: I've said too soon, the manual settings in lighttpd conf files get 'refreshed' after reboot. So now I have to look for a different solution.  :(

                                      1 Reply Last reply Reply Quote 0
                                      • RonpfSR
                                        RonpfS
                                        last edited by

                                        Having problem with unbound that doesn't start on reboot

                                        I did a fresh install of  2.2.5-RELEASE (i386) built on Wed Nov 04 15:50:18 CST 2015 on a Asus P4P800 P4 3.0GHZ 2GB.

                                        On the old system, I had 2.2.5 x386 snort, suricata, NTopNG, PfBlockerNG v2.0.1 installed.
                                        When I restored the config, package re-installation failed, no resolver was running, so I set pfsense to use the resolver of the WAN DHCP interface.

                                        I reinstalled all package, remove the WAN DNS from General Setup, things run fine but when I reboot unbound isn't running, I can start it and it keep running.

                                        So I desintalled the packages, reinstall snort and suricata, reboot is fine, unbound is running .
                                        Installed pfBlockerNG v2.0.2, everything is fine, reboot , unbound isn't up, I start it and it is fine

                                        System General

                                        Dec  5 13:36:50 pfSense php-fpm[19202]: /reboot.php: Stopping all packages.
Dec  5 13:36:50 pfSense SnortStartup[38735]: Snort STOP for WAN(33233_sk0)...
Dec  5 13:36:51 pfSense snort[92226]: *** Caught Term-Signal
Dec  5 13:36:53 pfSense SuricataStartup[47549]: Suricata STOP for WAN(63282_sk0)...
Dec  5 13:36:54 pfSense kernel: sk0: promiscuous mode disabled
Dec  5 13:36:59 pfSense shutdown: reboot by root: 
Dec  5 13:36:59 pfSense shutdown: reboot by root: 
Dec  5 13:36:59 pfSense syslogd: exiting on signal 15
Dec  5 13:38:42 pfSense syslogd: kernel boot file is /boot/kernel/kernel
Dec  5 13:38:42 pfSense kernel: Copyright (c) 1992-2014 The FreeBSD Project.
Dec  5 13:38:42 pfSense kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Dec  5 13:38:42 pfSense kernel: The Regents of the University of California. All rights reserved.
Dec  5 13:38:42 pfSense kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Dec  5 13:38:42 pfSense kernel: FreeBSD 10.1-RELEASE-p24 #0 f27a67c(releng/10.1)-dirty: Wed Nov  4 16:13:40 CST 2015
Dec  5 13:38:42 pfSense kernel: root@pfs22-i386-builder:/usr/obj.RELENG_2_2.i386/usr/pfSensesrc/src.RELENG_2_2/sys/pfSense_SMP.10 i386
Dec  5 13:38:42 pfSense kernel: FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Dec  5 13:38:42 pfSense kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.87-MHz 686-class CPU)
Dec  5 13:38:42 pfSense kernel: Origin = "GenuineIntel"  Id = 0xf41  Family = 0xf  Model = 0x4  Stepping = 1
Dec  5 13:38:42 pfSense kernel: Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Dec  5 13:38:42 pfSense kernel: Features2=0x441d <sse3,dtes64,mon,ds_cpl,cnxt-id,xtpr>Dec  5 13:38:42 pfSense kernel: TSC: P-state invariant
Dec  5 13:38:42 pfSense kernel: real memory  = 2147483648 (2048 MB)
Dec  5 13:38:42 pfSense kernel: avail memory = 2072236032 (1976 MB)
Dec  5 13:38:42 pfSense kernel: Event timer "LAPIC" quality 400
Dec  5 13:38:42 pfSense kernel: ACPI APIC Table: <a m="" i ="" oemapic="">
Dec  5 13:38:42 pfSense kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Dec  5 13:38:42 pfSense kernel: FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
Dec  5 13:38:42 pfSense kernel: cpu0 (BSP): APIC ID:  0
Dec  5 13:38:42 pfSense kernel: cpu1 (AP/HT): APIC ID:  1
Dec  5 13:38:42 pfSense kernel: ioapic0 <version 2.0="">irqs 0-23 on motherboard
Dec  5 13:38:42 pfSense kernel: wlan: mac acl policy registered
Dec  5 13:38:42 pfSense kernel: kbd1 at kbdmux0
Dec  5 13:38:42 pfSense kernel: random: <software, yarrow="">initialized
Dec  5 13:38:42 pfSense kernel: cryptosoft0: <software crypto="">on motherboard
Dec  5 13:38:42 pfSense kernel: padlock0: No ACE support.
Dec  5 13:38:42 pfSense kernel: acpi0:</software></software,></version> </a><a m="" i="" oemxsdt="">on motherboard
Dec  5 13:38:42 pfSense kernel: acpi0: Power Button (fixed)
Dec  5 13:38:42 pfSense kernel: acpi0: reservation of 0, a0000 (3) failed
Dec  5 13:38:42 pfSense kernel: acpi0: reservation of 100000, 7fef0000 (3) failed
Dec  5 13:38:42 pfSense kernel: cpu0: <acpi cpu="">on acpi0
Dec  5 13:38:42 pfSense kernel: cpu1: <acpi cpu="">on acpi0
Dec  5 13:38:42 pfSense kernel: attimer0: <at timer="">port 0x40-0x43 irq 0 on acpi0
Dec  5 13:38:42 pfSense kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Dec  5 13:38:42 pfSense kernel: Event timer "i8254" frequency 1193182 Hz quality 100
Dec  5 13:38:42 pfSense kernel: atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
Dec  5 13:38:42 pfSense kernel: Event timer "RTC" frequency 32768 Hz quality 0
Dec  5 13:38:42 pfSense kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Dec  5 13:38:42 pfSense kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Dec  5 13:38:42 pfSense kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
Dec  5 13:38:42 pfSense kernel: pci0: <acpi pci="" bus="">on pcib0
Dec  5 13:38:42 pfSense kernel: agp0: <intel 82865="" host="" to="" agp="" bridge="">on hostb0
Dec  5 13:38:42 pfSense kernel: pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
Dec  5 13:38:42 pfSense kernel: pci1: <acpi pci="" bus="">on pcib1
Dec  5 13:38:42 pfSense kernel: vgapci0: <vga-compatible display="">mem 0xfa000000-0xfaffffff,0xf6000000-0xf7ffffff at device 0.0 on pci1
Dec  5 13:38:42 pfSense kernel: vgapci0: Boot video device
Dec  5 13:38:42 pfSense kernel: uhci0: <intel 82801eb="" (ich5)="" usb="" controller="" usb-a="">port 0xeec0-0xeedf irq 16 at device 29.0 on pci0
Dec  5 13:38:42 pfSense kernel: usbus0 on uhci0
Dec  5 13:38:42 pfSense kernel: uhci1: <intel 82801eb="" (ich5)="" usb="" controller="" usb-b="">port 0xef00-0xef1f irq 19 at device 29.1 on pci0
Dec  5 13:38:42 pfSense kernel: usbus1 on uhci1
Dec  5 13:38:42 pfSense kernel: uhci2: <intel 82801eb="" (ich5)="" usb="" controller="" usb-c="">port 0xef20-0xef3f irq 18 at device 29.2 on pci0
Dec  5 13:38:42 pfSense kernel: usbus2 on uhci2
Dec  5 13:38:42 pfSense kernel: uhci3: <intel 82801eb="" (ich5)="" usb="" controller="" usb-d="">port 0xef40-0xef5f irq 16 at device 29.3 on pci0
Dec  5 13:38:42 pfSense kernel: usbus3 on uhci3
Dec  5 13:38:42 pfSense kernel: ehci0: <intel 82801eb="" r="" (ich5)="" usb="" 2.0="" controller="">mem 0xfbfff800-0xfbfffbff irq 23 at device 29.7 on pci0
Dec  5 13:38:42 pfSense kernel: usbus4: EHCI version 1.0
Dec  5 13:38:42 pfSense kernel: usbus4 on ehci0
Dec  5 13:38:42 pfSense kernel: pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
Dec  5 13:38:42 pfSense kernel: pci2: <acpi pci="" bus="">on pcib2
Dec  5 13:38:42 pfSense kernel: skc0: <marvell gigabit="" ethernet="">port 0xd800-0xd8ff mem 0xfbefc000-0xfbefffff irq 22 at device 5.0 on pci2
Dec  5 13:38:42 pfSense kernel: skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
Dec  5 13:38:42 pfSense kernel: sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0
Dec  5 13:38:42 pfSense kernel: sk0: Ethernet address: 00:11:d8:0a:75:40
Dec  5 13:38:42 pfSense kernel: miibus0: <mii bus="">on sk0
Dec  5 13:38:42 pfSense kernel: e1000phy0: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus0
Dec  5 13:38:42 pfSense kernel: e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Dec  5 13:38:42 pfSense kernel: re0: <d-link dge-530(t)="" gigabit="" ethernet="" adapter="">port 0xd400-0xd4ff mem 0xfbefbc00-0xfbefbcff irq 22 at device 10.0 on pci2
Dec  5 13:38:42 pfSense kernel: re0: Chip rev. 0x10000000
Dec  5 13:38:42 pfSense kernel: re0: MAC rev. 0x00000000
Dec  5 13:38:42 pfSense kernel: miibus1: <mii bus="">on re0
Dec  5 13:38:42 pfSense kernel: rgephy0: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface="">PHY 1 on miibus1
Dec  5 13:38:42 pfSense kernel: rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
Dec  5 13:38:42 pfSense kernel: re0: Ethernet address: 1c:7e:e5:1f:fa:d5
Dec  5 13:38:42 pfSense kernel: isab0: <pci-isa bridge="">at device 31.0 on pci0
Dec  5 13:38:42 pfSense kernel: isa0: <isa bus="">on isab0
Dec  5 13:38:42 pfSense kernel: atapci0: <intel ich5="" udma100="" controller="">port 0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f irq 18 at device 31.1 on pci0
Dec  5 13:38:42 pfSense kernel: ata2: <ata channel="">at channel 0 on atapci0
Dec  5 13:38:42 pfSense kernel: ata3: <ata channel="">at channel 1 on atapci0
Dec  5 13:38:42 pfSense kernel: pcm0: <intel ich5="" (82801eb)="">port 0xe800-0xe8ff,0xee80-0xeebf mem 0xfbfff400-0xfbfff5ff,0xfbfff000-0xfbfff0ff irq 17 at device 31.5 on pci0
Dec  5 13:38:42 pfSense kernel: pcm0: <analog devices="" ad1985="" ac97="" codec="">Dec  5 13:38:42 pfSense kernel: acpi_button0: <power button="">on acpi0
Dec  5 13:38:42 pfSense kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Dec  5 13:38:42 pfSense kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
Dec  5 13:38:42 pfSense kernel: fdc0: <floppy drive="" controller="" (fde)="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Dec  5 13:38:42 pfSense kernel: pmtimer0 on isa0
Dec  5 13:38:42 pfSense kernel: sc0: <system console="">at flags 0x100 on isa0
Dec  5 13:38:42 pfSense kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Dec  5 13:38:42 pfSense kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Dec  5 13:38:42 pfSense kernel: ata0: <ata channel="">at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
Dec  5 13:38:42 pfSense kernel: ata1: <ata channel="">at port 0x170-0x177,0x376 irq 15 on isa0
Dec  5 13:38:42 pfSense kernel: atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
Dec  5 13:38:42 pfSense kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0
Dec  5 13:38:42 pfSense kernel: kbd0 at atkbd0
Dec  5 13:38:42 pfSense kernel: atkbd0: [GIANT-LOCKED]
Dec  5 13:38:42 pfSense kernel: ppc0: parallel port not found.
Dec  5 13:38:42 pfSense kernel: p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
Dec  5 13:38:42 pfSense kernel: p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Dec  5 13:38:42 pfSense kernel: Timecounters tick every 1.000 msec
Dec  5 13:38:42 pfSense kernel: IPsec: Initialized Security Association Processing.
Dec  5 13:38:42 pfSense kernel: random: unblocking device.
Dec  5 13:38:42 pfSense kernel: usbus0: 12Mbps Full Speed USB v1.0
Dec  5 13:38:42 pfSense kernel: usbus1: 12Mbps Full Speed USB v1.0
Dec  5 13:38:42 pfSense kernel: usbus2: 12Mbps Full Speed USB v1.0
Dec  5 13:38:42 pfSense kernel: usbus3: 12Mbps Full Speed USB v1.0
Dec  5 13:38:42 pfSense kernel: usbus4: 480Mbps High Speed USB v2.0
Dec  5 13:38:42 pfSense kernel: ugen0.1: <intel>at usbus0
Dec  5 13:38:42 pfSense kernel: uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
Dec  5 13:38:42 pfSense kernel: ugen4.1: <intel>at usbus4
Dec  5 13:38:42 pfSense kernel: uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
Dec  5 13:38:42 pfSense kernel: ugen3.1: <intel>at usbus3
Dec  5 13:38:42 pfSense kernel: uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
Dec  5 13:38:42 pfSense kernel: ugen2.1: <intel>at usbus2
Dec  5 13:38:42 pfSense kernel: uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
Dec  5 13:38:42 pfSense kernel: ugen1.1: <intel>at usbus1
Dec  5 13:38:42 pfSense kernel: uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
Dec  5 13:38:42 pfSense kernel: uhub0: 2 ports with 2 removable, self powered
Dec  5 13:38:42 pfSense kernel: uhub2: 2 ports with 2 removable, self powered
Dec  5 13:38:42 pfSense kernel: uhub3: 2 ports with 2 removable, self powered
Dec  5 13:38:42 pfSense kernel: uhub4: 2 ports with 2 removable, self powered
Dec  5 13:38:42 pfSense kernel: uhub1: 8 ports with 8 removable, self powered
Dec  5 13:38:42 pfSense kernel: ugen2.2: <ortek>at usbus2
Dec  5 13:38:42 pfSense kernel: ukbd0: <ep1 interrupt="">on usbus2
Dec  5 13:38:42 pfSense kernel: kbd2 at ukbd0
Dec  5 13:38:42 pfSense kernel: ada0 at ata2 bus 0 scbus0 target 0 lun 0
Dec  5 13:38:42 pfSense kernel: ada0: <st340016a 3.10="">ATA-5 device
Dec  5 13:38:42 pfSense kernel: ada0: Serial Number 3HS49BWJ
Dec  5 13:38:42 pfSense kernel: ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
Dec  5 13:38:42 pfSense kernel: ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
Dec  5 13:38:42 pfSense kernel: ada0: Previously was known as ad4
Dec  5 13:38:42 pfSense kernel: cd0 at ata3 bus 0 scbus1 target 0 lun 0
Dec  5 13:38:42 pfSense kernel: cd0: <hl-dt-st dvd-ram="" gh22np20="" 2.00="">Removable CD-ROM SCSI-0 device 
Dec  5 13:38:42 pfSense kernel: cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
Dec  5 13:38:42 pfSense kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Dec  5 13:38:42 pfSense kernel: SMP: AP CPU #1 Launched!
Dec  5 13:38:42 pfSense kernel: Timecounter "TSC-low" frequency 1503437224 Hz quality 1000
Dec  5 13:38:42 pfSense kernel: Trying to mount root from ufs:/dev/ufsid/566228d1397a31e0 [rw]...
Dec  5 13:38:42 pfSense check_reload_status: Linkup starting sk0
Dec  5 13:38:44 pfSense check_reload_status: Linkup starting sk0
Dec  5 13:38:44 pfSense kernel: 
Dec  5 13:38:44 pfSense kernel: sk0: link state changed to UP
Dec  5 13:38:44 pfSense check_reload_status: rc.newwanip starting sk0
Dec  5 13:38:44 pfSense php: rc.bootup: Accept router advertisements on interface sk0 
Dec  5 13:38:44 pfSense check_reload_status: Linkup starting re0
Dec  5 13:38:44 pfSense kernel: re0: link state changed to DOWN
Dec  5 13:38:46 pfSense check_reload_status: Linkup starting re0
Dec  5 13:38:46 pfSense kernel: 
Dec  5 13:38:46 pfSense kernel: re0: link state changed to UP
Dec  5 13:38:46 pfSense php-fpm[245]: /rc.newwanip: rc.newwanip: Info: starting on sk0.
Dec  5 13:38:47 pfSense php: rc.bootup: Resyncing OpenVPN instances.
Dec  5 13:38:47 pfSense kernel: done.
Dec  5 13:38:47 pfSense kernel: pflog0: promiscuous mode enabled
Dec  5 13:38:47 pfSense kernel: ...
Dec  5 13:38:53 pfSense kernel: .done.
Dec  5 13:38:55 pfSense kernel: done.
Dec  5 13:38:56 pfSense kernel: done.
Dec  5 13:38:57 pfSense lighttpd[28659]: (log.c.194) server started 
Dec  5 13:38:57 pfSense kernel: done.
Dec  5 13:38:57 pfSense php: rc.bootup: ROUTING: setting default route to 172.25.0.254
Dec  5 13:38:57 pfSense kernel: done.
Dec  5 13:39:00 pfSense php: rc.bootup: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1449340740] unbound[30863:0] error: bind: address already in use [1449340740] unbound[30863:0] fatal error: could not open ports' 
Dec  5 13:39:00 pfSense kernel: done.
Dec  5 13:39:00 pfSense kernel: done.
Dec  5 13:39:00 pfSense check_reload_status: Updating all dyndns
Dec  5 13:39:06 pfSense kernel: .done.
Dec  5 13:39:11 pfSense php: rc.bootup: Creating rrd update script
Dec  5 13:39:11 pfSense php: rc.bootup: miniupnpd: Starting service on interface: lan
Dec  5 13:39:11 pfSense kernel: done.
Dec  5 13:39:11 pfSense kernel: done.
Dec  5 13:39:11 pfSense syslogd: exiting on signal 15
Dec  5 13:39:11 pfSense syslogd: kernel boot file is /boot/kernel/kernel
Dec  5 13:39:11 pfSense php-fpm[31202]: /rc.start_packages: Restarting/Starting all packages.
Dec  5 13:39:11 pfSense kernel: done.
Dec  5 13:39:12 pfSense check_reload_status: Syncing firewall
Dec  5 13:39:12 pfSense SnortStartup[70337]: Snort START for WAN(33233_sk0)...
Dec  5 13:39:15 pfSense check_reload_status: Syncing firewall
Dec  5 13:39:15 pfSense check_reload_status: Syncing firewall
Dec  5 13:39:15 pfSense SuricataStartup[79006]: Suricata START for WAN(63282_sk0)...
Dec  5 13:39:15 pfSense php-fpm[31202]: [pfBlockerNG] Starting sync process.
Dec  5 13:39:19 pfSense check_reload_status: Reloading filter
Dec  5 13:39:40 pfSense login: login on ttyv0 as root
Dec  5 13:39:40 pfSense sshlockout[53762]: sshlockout/webConfigurator v3.0 starting up
Dec  5 13:39:53 pfSense kernel: sk0: promiscuous mode enabled
Dec  5 13:43:45 pfSense php-fpm[10393]: /index.php: Successful login for user 'admin' from: 172.24.48.84
Dec  5 13:43:45 pfSense php-fpm[10393]: /index.php: Successful login for user 'admin' from: 172.24.48.84
Dec  5 13:44:32 pfSense php-fpm[8855]: /status_services.php: NTPD is starting up.
Dec  5 13:50:26 pfSense check_reload_status: Syncing firewall
Dec  5 13:50:26 pfSense check_reload_status: Reloading filter
Dec  5 14:00:54 pfSense php-fpm[26326]: /index.php: Successful login for user 'admin' from: 172.24.48.84
Dec  5 14:00:54 pfSense php-fpm[26326]: /index.php: Successful login for user 'admin' from: 172.24.48.84</hl-dt-st></st340016a></ep1></ortek></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></cpu></at></keyboard></ata></ata></generic></system></floppy></power></analog></intel></ata></ata></intel></isa></pci-isa></rtl8169s></mii></d-link></marvell></mii></marvell></marvell></acpi></acpi></intel></intel></intel></intel></intel></vga-compatible></acpi></acpi></intel></acpi></acpi></at></at></acpi></acpi></a></sse3,dtes64,mon,ds_cpl,cnxt-id,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> 
``` <a m="" i="" oemxsdt="">Resolver

                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: service stopped (unbound 1.5.4).
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: server stats for thread 0: 34 queries, 15 answers from cache, 19 recursions, 1 prefetch
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: server stats for thread 0: requestlist max 11 avg 0.9 exceeded 0 jostled 0
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: average recursion processing time 0.211307 sec
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: histogram of recursion processing times
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: [25%]=0.0503223 median[50%]=0.144179 [75%]=0.283989
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: lower(secs) upper(secs) recursions
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.016384    0.032768 1
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.032768    0.065536 7
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.065536    0.131072 1
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.131072    0.262144 5
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.262144    0.524288 3
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.524288    1.000000 2
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: server stats for thread 1: 5 queries, 3 answers from cache, 2 recursions, 1 prefetch
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: server stats for thread 1: requestlist max 0 avg 0 exceeded 0 jostled 0
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: average recursion processing time 0.156386 sec
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: histogram of recursion processing times
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: [25%]=0 median[50%]=0 [75%]=0
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info: lower(secs) upper(secs) recursions
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.065536    0.131072 1
                                        Dec  5 12:38:36 pfSense unbound: [26765:0] info:    0.131072    0.262144 1
                                        Dec  5 12:39:06 pfSense unbound: [52118:0] notice: init module 0: validator
                                        Dec  5 12:39:06 pfSense unbound: [52118:0] notice: init module 1: iterator
                                        Dec  5 12:39:06 pfSense unbound: [52118:0] info: start of service (unbound 1.5.4).
                                        Dec  5 13:44:49 pfSense unbound: [25393:0] notice: init module 0: validator
                                        Dec  5 13:44:49 pfSense unbound: [25393:0] notice: init module 1: iterator
                                        Dec  5 13:44:49 pfSense unbound: [25393:0] info: start of service (unbound 1.5.4).

                                        
This did not happen with the old system, but I can no longer do any test on that system, today it has disk error when I boot it  :-\

On a few reboot, unbound was running at bootup but it silently died, a restart keep it running.</a>

                                        2.4.5-RELEASE-p1 (amd64)
                                        Intel Core2 Quad CPU Q8400 @ 2.66GHz 8GB
                                        Backup 0.5_5, Bandwidthd 0.7.4_4, Cron 0.3.7_5, pfBlockerNG-devel 3.0.0_16, Status_Traffic_Totals 2.3.1_1, System_Patches 1.2_5

                                        1 Reply Last reply Reply Quote 0
                                        • BBcan177B
                                          BBcan177 Moderator
                                          last edited by

                                          Hi RonpfS,

                                          When you restored the backup config, was DNSBL installed? If not, then in the Resolver Adv. settings, there would have been this line:

                                          server:include: /var/unbound/pfb_dnsbl.conf

                                          but that file would not exist yet. So Unbound would fail to start.

                                          Since installing DNSBL, did you enable any of the 'DHCP Registration' options in the Resolver? There are some issues with those options.

                                          "Experience is something you don't get until just after you need it."

                                          Website: http://pfBlockerNG.com
                                          Twitter: @BBcan177  #pfBlockerNG
                                          Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                          1 Reply Last reply Reply Quote 0
                                          • RonpfSR
                                            RonpfS
                                            last edited by

                                            Yeah I figured out it would have been better to disable pfBlockerNG before saving the old config.

                                            No I don't have the DHCP registration ticked nor Static DHCP.

                                            I am having trouble with the Suppression List.

                                            Do I need to create a rule with pfBlockerNGSuppress to permit traffic or is this done by pfBlockerNG. If this is the case, I don't see any rules generated that let the traffic pass.

                                            Adding an IP to the suppression list doesn't seems to let it pass.

                                            2.4.5-RELEASE-p1 (amd64)
                                            Intel Core2 Quad CPU Q8400 @ 2.66GHz 8GB
                                            Backup 0.5_5, Bandwidthd 0.7.4_4, Cron 0.3.7_5, pfBlockerNG-devel 3.0.0_16, Status_Traffic_Totals 2.3.1_1, System_Patches 1.2_5

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post