Still issues with creating LAGG LACP and VLAN for igb driver



  • I'm having issues with creating LAGG LACP Interfaces

    Able to create VLAN but DHCP doesn't seems to work for NICs that uses igb driver.

    ANY Solutions to above issues, this issue is there from pfSense ver 2.x



  • lagg LACP with VLANs works fine on igb, I wouldn't be able to send this otherwise.

    Guessing your switch isn't setup correctly for active mode LACP, or the VLAN tagging on the switch isn't right.  First look at the ifconfig output for lagg0 and verify NIC status. Check LACP status switch-side also.


Log in to reply