OpenVPN problem after 2.2.5 upgrade



  • Hello, after I upgraded my pfsense to 2.2.5 version I can connect to my openvpn network but no traffic is routed to my LAN. Everything worked fine before. I have notice in the OVPN STATUS page that the client is given the Virtual Address: 255.255.255.255 but the "ipV4 tunnel network" is configured to "192.168.80.0/24".

    Any idea about what might be going on? Thanks!



  • Hi alber_rm:

    not sure either but have you tried hitting the save buttons on both server and client?

    192.168.80.0/24 is not within any of your working subnets is it?



  • Any idea about what might be going on? Thanks!

    Have you verified that your settings are unchanged?  I've upgraded to each release from 2.1.x all the way to 2.2.5 with OpenVPN, and had no problems at all.



  • Hi again, thanks for your comments. I have tried saving the server config again with no luck. I am not using subnet 192.168.80.X por any other purpose.

    I think the problem might have anything to do with the fact that the client gets assigned ip address 255.255.255.255 instead of 192.168.80.X (see the image).

    Any other suggestions?

    ![Captura de pantalla 2015-11-26 a las 23.39.35.png](/public/imported_attachments/1/Captura de pantalla 2015-11-26 a las 23.39.35.png)
    ![Captura de pantalla 2015-11-26 a las 23.39.35.png_thumb](/public/imported_attachments/1/Captura de pantalla 2015-11-26 a las 23.39.35.png_thumb)


Log in to reply