PfSense as L2TP client to ISP - not working
-
Hi there,
I'm multihoming to a Wireless ISP that provided me a ethernet link to my pfSense firewall.
The other connection is via an ADSL link that works (except for the ADSL link itself that is oversubscribed etc.)Both are connected in via a VLAN on the em1 interface.
(historical and potential leased line on the main/untagged em1 interface)The WISP gave me L2TP login information (username, password, destination L2tp server: 192.168.5.1)
Usually they install a CPE which connects via WiFi to their AP, but since the AP/switch is just a room away from us, the reason for the direct ethernet cable where I have to enable DHCP to connect to their "AP", but now need a L2TP tunnel to get internet. The reason being that they use that same network for vouchers/captive portals etc. etc.I've configured em1_vlan20, enabled DHCP on there and add a route to the 192.168.5.1 L2TP server.
I've then attempted to add a PPP type interface with L2TP authentication/IP assignment and called that WISPL2TP, but I don't see traffic on the em1_vlan20 to the L2TP server, and the interface doesn't seem to get connected, even if I press the "Connect" button in the interfaces status page.
Questions:
- What is the correct way to configure the L2TP and which interface? I can't seem to find any documentation :(
- Where is the logs for the L2TP interfaces?
- What more information is needed to get this connected?
It seems simple, but I'm missing something ;(
routing/network information: http://pastebin.com/7QeBaBAD http://pastebin.com/7QeBaBAD