Squidguard empty Target Rules (Enable BL Checked)

[ThiagoTw]

Hi. After a fresh 2.2.6 installation (menstick version)  my target list shows empty with no categories.

Installed packages squid 3 squidguard and lightsquid
Blacklist: Shallalist.de

What i did so far:

Install and get to work the tree packages individually
Check the box enable blacklist
Apply  ;)
Download Shallalist.de
Change the size of proxy server > Local cache : hard disk and memory to 1024
Install everything again from a different sources and different version (2.2.2)

System log, system spec etc, attached 










[System log.txt](/public/imported_attachments/1/System log.txt)

[Cyberscapes]

Hi, Did you get this problem resolved? I am having the same or similar problem.

pfSense ver 2.3.2
using: Squid and SquidGuard
using this blacklist in SquidGuard: http://www.shallalist.de/Downloads/shallalist.tar.gz (Enable blacklist is checked)

I am accessing the pfSense on a Mac Mini. When I download the blacklist in SquidGuard, it says it downloaded and updated the db. But when I go into the Common ACL to tool at the Target Categories, the blacklist is not listed. I've used Chrome, Firefox and Safari to download the blacklist. Same result. (Some people have had success with Edge and Internet Explorer, but I don't have access to those.) I already tried changing cache sizes, including changing the hard disk cache size to 0 and the file system to null.

WHEN I DOWNLOAD THE BLACKLIST, HERE IS WHAT DISPLAYS
Begin blacklist update
Start download.
Download archive http://www.shallalist.de/downloads/shallalist.tar.gz
Download complete
Unpack archive
Scan blacklist categories.
Start rebuild DB.
Copy DB to workdir.
Reconfigure Squid proxy.
Blacklist update complete.

WHEN I LOOK AT THE SYSTEM LOG RIGHT AFTER THE DOWNLOAD (after click Apply in SquidGuard and restart), I SEE THIS ERROR
inetd 14526 Reconfigured: new=0 old=1 dropped=0 (services)
php-cgi squidGuard_blacklist_update.sh: The command '/usr/bin/tar zxvf /tmp/squidguard_blacklist.tar -C /tmp/squidGuard/unpack' returned exit code '1', the output was 'tar: Failed to set default locale tar: Error opening archive: Unrecognized archive format'
php-cgi squidGuard_blacklist_update.sh: The command '/bin/cp -f -p /tmp/squidGuard/arcdb/blacklist.files /usr/local/etc/squidGuard' returned exit code '1', the output was 'cp: /tmp/squidGuard/arcdb/blacklist.files: No such file or directory'

WHEN I LOOK AT COMMON ACL, HERE IS WHAT DISPLAYS
Targe Rules list
ACCESS: 'whitelist' - always pass; 'deny' - block; 'allow' - pass, if not blocked.
Target Categories
[Dummy] access
Default access [all] access

[KOM]

Anything in any of squidguard's logs?

[ThiagoTw]

That's was been awhile ago  "February 24, 2016"  ;) but if i remember well, i give up and change the roll machine, amd to intel or just the memory card not sure… sorry if can't help you better

[papartsharingan]

Hi,

Reinstall the shallalist with this http://www.shallalist.de/Downloads/shallalist.tar.gz

papartsharingan

[kiancloud]

@papartsharingan
Thanks man u save me with this info..