Subnet calc on wan iface

[maverick_slo]

Hi!

See attached image.
What is going on?

BR,
Greg

[maverick_slo]

What I did was remove IPV6 GW from WAN I never touched IPV4 settings there.

[heper]

note the "/1" that'll overlap with basically anything ;)

this is either a bug with updating and modifying the subnet or its a bug calculation the subnet or both.

some of yesterdays commits involved moving to higher level function for calculating subnets

[rbgarga]

@heper:

note the "/1" that'll overlap with basically anything ;)

this is either a bug with updating and modifying the subnet or its a bug calculation the subnet or both.

some of yesterdays commits involved moving to higher level function for calculating subnets

Yesterday's changes in this area didn't touch interfaces.php.

I tested it here and it's respecting subnet bits I chose and not moving to /1. Lets wait from submitter if there is a way to reproduce the problem

[maverick_slo]

I can reproduce it now if you ment me :)

[rbgarga]

@maverick_slo:

I can reproduce it now if you ment me :)

Good, what are necessary steps to reproduce it?

[maverick_slo]

Hmm I just read your post more carefully.

I had IP / 1 ?? Why?

I changed it back to IP / 16

Something reverted it to 1 and I have no idea what.

[jahonix]

Is that a static entry or a DHCP lease you get from your provider?

[maverick_slo]

Static.
I`m looking at my 2.2.6 config and indeed there is /16.

So something changed it from /16 to /1 and sure as hell wasn`t me :)

[cmb]

Likely was you, maybe a stray tab and key press that switched the box to 1. Look under Diag>Backup/restore, Config history tab. You'll see where it changed.