Intel PRO/Wireless 2200BG supported?

David_W

The firmware is now incorporated into the base system - see here for the announcement. You need to define a system variable (for example, in boot/loader.conf) to show your assent to the licence - though I can't remember what it is.

That said, I'm 99% sure you need FreeBSD 6.3 or 7.0 to have the firmware available. This means you'll need the pfSense 1.2 build on FreeBSD 6.3, 1.2.1-BETA or 1.3-ALPHA ALPHA. The alternative is to install the firmware from the FreeBSD port.

dotdash

Ah, cool. I remember having to set the license accept variable before, but you used to have to copy the firmware in yourself.
The FreeBSD 7 man page says:
_This driver requires firmware to be loaded before it will work. For the
loaded firmware to work the license at
/usr/share/doc/legal/intel_iwi/LICENSE must be agreed to and the follow-
ing line be added to loader.conf(5):

legal.intel_iwi.license_ack=1_

chrisssooo

Hi,
sice two days i try to activate my Intel 2200BG Card. Its dont work. For first i have install a newer version from pfsense becourse the FreeBSD version. At the moment i have installed 1.2.1 RC2. This Version have FreeBSD 7.0. At normal there must be have the Drivers/firmware in the Kernel, but nothing … in this Version there is not. Its not possible to activate my card. What can i do? Maybe build the Kernel Modules and load it? I dont know becourse i am not a pro. Have someone a idee?

dotdash

The man page again:
_Alternatively, to load the driver as a module at boot time, place the
following lines in loader.conf(5):

if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"

In both cases, place the following lines in loader.conf(5) to load the
firmware modules:

iwi_bss_load="YES"
iwi_ibss_load="YES"
iwi_monitor_load="YES"_
You should have wlan and I think firmware, so I'd expect you would need to copy
if_iwi.ko and iwi_*.ko to /boot/kernel/ from a stock 7.0 install and add the lines to loader.conf
PS- Don't forget the license_ack line

chrisssooo

Hi,
thx for the answer. I have try all options from exactly the same man page without work.
My Problem is, that i dont know someone who have BSD 7.0 that can give me the modules
and also i dont find it on web :( do you know from where i can get it? Must i install
freebsd by self to ge it?

Becorse the firmware … i have see there is a modul in the kernel who called "firmware" is it that what i need?

pfsense:/# kldstat -v | grep firmware
247 firmware

pfsense:/# kldstat -v | grep wlan
280 wlan_acl
281 wlan_amrr
282 wlan_ccmp
283 wlan_tkip
284 wlan_wep
285 wlan
286 wlan_scan_ap
287 wlan_scan_sta
288 wlan_xauth

chrisssooo

ITS WORK NOW!

Someone from a FreeBSD IRC Channel have help me and give me this link who i can download the modules:
http://deponie.yamagi.org/freebsd/iwi/

Its work on 1.2.1 RC2 … really fantastic!

But Question to the DEVs ... why do you not compile its in the Kernel or add the modules in pfSense?
I thing this Adapter is often avaiable.

chrisssooo

Hmmm … the drivers works, i have try ad-hoc and see it.
But is it possible that this driver (iwi) dont can do a Access Point?

Have try all settings, but when i set as Access Ponit i can see the Network with my laptop.

EDIT:
Now i have found out how i can test the card to get information what support this card:

ifconfig iwi0 list caps
iwi0=25818300<ibss,pmgt,shpreamble,monitor,wpa1,wpa2,wme,bgscan></ibss,pmgt,shpreamble,monitor,wpa1,wpa2,wme,bgscan>

The HOSTAP mode is missing … that means definitly that the iwi driver dont support hostap.

Now i have found some drivers who make support for this card and hostap:
http://sourceforge.net/projects/ipw2200-ap

The only one big problem ist, that this driver is for Linux. Is it possible to use it and compile it in freebsd maybe?

When this dont work then i need definitly a other miniPCI WLan card :(

dotdash

I generally use Atheros cards, so I didn't look very close at iwi, but it indeed does not support hostap.
That rules out iwi as an option if you need an AP. I would not hold my breath on anyone getting this working in the foreseeable future. On the bright side, you can get a high-power Atheros card that works out of the box for $35 http://www.netgate.com/product_info.php?cPath=26_34&products_id=348

pulsar

Hi!

Is it possible to do this on an embedded system (Wrap)

If.
Can someone tell me how to do this - the simpe way - I'm not an expert.

I can logg in as root with winSCP but I can't save when I edit files.

Where do I find loader.conf(5):

Please help

___The man page again:
Alternatively, to load the driver as a module at boot time, place the
following lines in loader.conf(5):

if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"

In both cases, place the following lines in loader.conf(5) to load the
firmware modules:

iwi_bss_load="YES"
iwi_ibss_load="YES"
iwi_monitor_load="YES"

You should have wlan and I think firmware, so I'd expect you would need to copy
if_iwi.ko and iwi_*.ko to /boot/kernel/ from a stock 7.0 install and add the lines to loader.conf
PS- Don't forget the license_ack line___

pulsar

Yes - thank you.
:)

You really helped me.

Do anybody know if there is some other software I can install in my WRAP (flash memory) that works as AP with Intel PRO/Wireless 2915ABG

DMESG
iwi0: <intel(r) pro="" wireless="" 2915abg="">mem 0x80000000-0x80000fff irq 12 at device 13.0 on pci0</intel(r)>

Pitbull

@chrisssooo:

Hi,
i have do it on a embedded system.

You must do it over the WebGUI becourse the write permissions is only over it.
Use pfsense 1.2.1 RC2 becourse FreeBSD 7.0

Step 1:
Download the 4 Kernel modules: http://deponie.yamagi.org/freebsd/iwi/
Go in the WebGUI in "Diagnostics->Command Prompt".
Upload all 4 Kernel Modules over the "Upload" function.
The Files will be upload to /tmp/
After Upload use also in "Diagnostics->Command Prompt" the "Execute Shell command" function to move the files to the right location.
1. Type in Command: "mv /tmp/if_iwi.ko /boot/kernel/" and click on "Execute"
2. Type in Command: "mv /tmp/iwi_* /boot/kernel/" and click on "Execute"
Now the Kernel Modules are on the right location.

Step 2:
Now edit the /boot/loader.conf File.
Go on WebGUI in "Diagnostics->Edit file".
Type in the field "Save/Load from path" this Text: "/boot/loader.conf" and click on "Load".
Add this 7 Lines at the end:
if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"
iwi_bss_load="YES"
iwi_ibss_load="YES"
iwi_monitor_load="YES"
legal.intel_iwi.license_ack=1
and click on "Save"
Reboot pfSense.

Step 3:
Now you can Assign you card in the WebGui over "Interfaces->assign" whit the "Plus" and configure it.
But when you read this Thread you must know:
ITS ONLY POSSIBLE TO SET THIS CARD TO "Infrastructure" AND "Ad-hoc" … "Access point" DONT WORK!!!

I hope its work for you :)

Thanks a milion this worked like a charm. This should be stickied somewhere as its a sure fire and quick way to get those cards working.