PfSense OpenVPN client is up , but cannot route traffice through VPN
-
Hi, I am really new to pfSense and I wanted to connect to my Open VPN Access Server on EC2, from my pfSense box.
What I have followed was
-
I have made a CA and Cert in the Cert Manager for my Access Server
-
Made an OpenVPN Client from using the Cert
-
I can see in the Status > OpenVPN that the status is UP with a Virtual Addr in the range of Dynamic IP address network in Access Server
-
Assigned an interface and enabled it
-
Then for testing purpose I edited the default pass rule in Firewall >LAN gateway to the OpenVPN interface
But I cannot browse the internet when I set the rule, one thing that I don't get is the IPv4 Tunnel Network and IPv4 Remote Network/s fields in the OpenVPN.
my lan - 192.168.0.0/24
Dynamic IP address network in Access Server - 192.168.10.0/24OpenVPN Client IPv4 Tunnel Network - 192.168.10.0/24
OpenVPN Client IPv4 Remote Network/s - 192.168.0.0/24I tried assigning 192.168.10.0/24 to both IPv4 Tunnel Network and IPv4 Remote Network/s, and still the same
can someone please point out what I have done wrong ?
Thanks -