Openvpn client no lan access.. no internet access

  • Hello, I have been trying to set up the openvpn server on pfsense. The client connects fine but it cannot ping or access LAN segment. IF internet traffic if forced to the tunnel Client doe not have Internet access or LAN access either..

    Lan IP is
    OpenVPN network is

    Can you help? Thank you

    attached are screenshots of servers config and
    Client config is as follows

    dev tun
    cipher AES-256-CBC
    auth SHA256
    resolv-retry infinite
    remote xxxxxxxxx tcp-client
    lport 0
    verify-x509-name "xxxxxxxxx" name
    pkcs12 pfsense-TCP-443.p12
    tls-auth pfsense-TCP-443.key 1
    ns-cert-type server
    comp-lzo no

  • Answering to my own post

    After 2 days of struggle….  I disabled "Allow communication between clients" and now openvpn client can see internal LAN. and can see internet traffic..

    Before client would connect to openvpn server but would not be able to go anywhere.. not even pinging the openvpn server interface
    prior to pfsense openvpn I used OpenVPN Access Server Virtual Appliance server and did not have these problems (same setup NAT..) and openvpn clients would see each other..

    Luckily.. i do not need the vpn clients to see each other...

Log in to reply