Squid Service Stops Each Time After Restarting with Upgrade 2.3

kiekar

Hello,

The upgrade to 2.3 went relatively smooth but I do have currently one issue with the squid package after the upgrade.
Each time I start the squid service it will shortly afterwards stop. What I found in the cache log file is shown below.
Your help would be much appreciated.

Thanks,

Maximum Resident Size: 72544 KB
Page faults with physical i/o: 0
2016/04/16 16:48:13 kid1| Starting Squid Cache version 3.5.16 for amd64-portbld-freebsd10.3…
2016/04/16 16:48:13 kid1| Service Name: squid
FATAL: UFSSwapDir::openLog: Failed to open swap log.
Squid Cache (Version 3.5.16): Terminated abnormally.
CPU Usage: 0.026 seconds = 0.026 user + 0.000 s

sulrich

I have noticed the same behaviour, and also CPU occupancy has been ALOT higher.
Ive restarted PFSense, un-installed squid, re-installed, and restarted again etc. with the same results.

Any advice would be appreciated.

Thanks

2.3-RELEASE (i386)
built on Mon Apr 11 18:12:06 CDT 2016
FreeBSD 10.3-RELEASE
Dual-Core AMD Opteron Processor 2212 HE
Current: 1000 MHz, Max: 2000 MHz
2 CPUs: 1 package(s) x 2 core(s)
1 Gig RAM

jwalhous

I also noticed this, I had to remove squid because it won't start.
if I remove squid and and untick the box that remembers all the settings it also doesn't seem to work, it keeps all the previous settings which I suspect might be corrupt or something.

mygoogoo

Same here. Squid Service stops after a brief period of time. Reinstalling package does not help.

squid.log.txt
squid.log2.txt

mio

Same here. Could it be that the config file of the old install is not compatible to the new one?

How can I do a clean reinstall without using the old config? Deleting the config file from /usr/local/etc/squid didn't work…

The error message I get after restarting and doing a request through the proxy (transparent) is the following one:


17.04.2016 21:46:33	assertion failed: store_swapout.cc:289: "mem->swapout.sio == self"
17.04.2016 21:46:33	pinger: Initialising ICMP pinger ...
17.04.2016 21:46:32	Service Name: squid
17.04.2016 21:46:32	Starting Squid Cache version 3.5.16 for amd64-portbld-freebsd10.3...

mygoogoo

Here's another post about similar issues. The solution so far seem to work in my case and Squid seems to be enable along with SquidGuard.

https://forum.pfsense.org/index.php?topic=110119.0

Hope this is helpful.

mio

Hmmm, with regard to the linked issue: my cache structure looked fine and had the right permissions (but I only checked at the top level) and I already deleted the /usr/pbi files. Nevertheless, after doing a


cd /var/squid
chown -R squid cache/

it seems to be working for now… Thanks!

jwalhous

cd /var/squid
chown -R squid cache/

doesn't work for me, anyone have any other suggestions?

Why isn't unticking

Keep Settings/Data

working? it keeps all the settings, how can I force it to remove old config ?

Regards
Jamie

packeteer

@kiekar:

Hello,

The upgrade to 2.3 went relatively smooth but I do have currently one issue with the squid package after the upgrade.
Each time I start the squid service it will shortly afterwards stop. What I found in the cache log file is shown below.
Your help would be much appreciated.

Thanks,

Maximum Resident Size: 72544 KB
Page faults with physical i/o: 0
2016/04/16 16:48:13 kid1| Starting Squid Cache version 3.5.16 for amd64-portbld-freebsd10.3…
2016/04/16 16:48:13 kid1| Service Name: squid
FATAL: UFSSwapDir::openLog: Failed to open swap log.
Squid Cache (Version 3.5.16): Terminated abnormally.
CPU Usage: 0.026 seconds = 0.026 user + 0.000 s

You'd probably have to recreate the cache and swap files.

stop the squid service, login to shell

cd /var/squid/cache

rm -rf *

squid -z

Restart the squid service.

That is, if you are ok with deleting all the previous cache files.

Works for me.