ATT Uverse RG Bypass (0.2 BTC)
-
@untamedgorilla Are you saying yours wasn't working, then you upgraded to 23.01 and it works? What is your setup?
-
2.7 and 23.01 have the same capabilities for handling priority tagging and/or VLAN0.
-
@bulldog5 yes. I tried the other sense firewall first. I didn't like it, but when I found out the 2.7 development supported vlan0 I switched back, and then I upgraded to 23.01 because it was a full release. You can use 2.7 or 23.01.
-
@untamedgorilla running 23.01 on a test box, VLAN 0 still seems to be an issue. I've tried running the standard command with the norm in the wpa_supplicant.conf, certs are in place. em0 is my WAN interface, mac is cloned to that of my ATT RGW.
/usr/local/sbin/wpa_supplicant -D wired -i em0 -c /conf/wpa_supplicant.confNo go, get em0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
I've tried setting pcp 0, 1,2 setting PROMISC, ifconfig em0 -vlanhwfilter.
Nothing seems to work. I even have a dumb switch between the WAN port and working ATT ONT currently.pfatt.sh works fine on my current prod pfsense 2.4.5
-
@untamedgorilla following back up on my previous post. VLAN0 is NOT fixed for ATT EAP in pfsense 23.01 from what i can tell in my testing. PCP 0 will let the interface tag all traffic vlan0, that doesn't help the fact that inbound tagged vlan0 EAP packets are ignored. So WPA will never see them and auth.
-
@bulldog5 These are my findings as well, maybe the wpa supplicant code needs to be patched like the dhclient was to be able to communicate over VLAN 0?
-
@bigjohns97 I don't understand the issue about VLAN 0. If you run PFSense in an ESXi VM, the vm code handles the VLAN 0 problem nicely. And there are a lot of benefits in terms of snapshots etc... that come from running virtualized. And for just one host, you can get the free version of ESXi from vmware. No vcenter, but for one machine its not really that helpful.
-
@fresnoboy In this case the guest OS is unaware of the VLAN tags being applied, as for why I don't run virtualized it is too much of a performance hit when doing VPN at 1gbit speeds.
-
@bigjohns97 I would be surprised if there is much of a hit at all running virtualized. ESXi at least passes all the processor extensions through to the guest, so if you have the crypto acceleration, it definitely uses that. I know that's the case with my PFSense VM.
-
@fresnoboy I would consider yourself surprised then :)
This is something I have tried recently using esxi 8.0 and 22.xx as well as 23.01 and while I got the same performance line rate wise the CPU percentage being shown as utilized was 100% utilization.
Whenever I do this on bare metal the CPU utilization is around 20% on the exact same hardware.
I almost want to install a second drive in my server just so I can switch back and forth using BIOS boot options.
But so far I have not found anyone that could point to anything I was doing wrong, just that generic "virtualization shouldn't cause a performance penalty" response.
Which BTW I am that guy as a server admin / engineer of over 25 years I am that dude arguing for virtualization, but I could never get it to not show such CPU utilization when performance this performance benchmark test.
-
@bigjohns97 Count me surprised. Was this true with ESXi 7? 8.0 is a little too much milk for my taste - I only drink wine in hypervisors.
-
No esxi here, but I am using proxmox.
PF + 23.01
I tried all sorts of variations to get rid of the vlan0, including suggestions from https://forum.proxmox.com/threads/how-to-pass-vlan-0-priority-tags-to-pfsense-for-dhcp.112374/ , post #2.
No can do. The only way I can get auth to work is by directly passing the wan nic to the pf vm and using the netgraph/supplicant method. The certs are known good and have been in use for a number of years.
Using 23.01, should it be possible to use wpa_supplicant and have functional wan dhcp without netgraph of any kind?
-
@gpz1100 no, it never was said to work in pfsense 23.01. There is so much bad misinformation on this topic. Freebsd 14 still doesn't handle tagged vlan0 inbound, which is what ATT EAP auth uses via wpa_supplicant. The kernel just discards because BSD doesn't know how to handle.
-
The vlan0 part is not the problem. FreeBSD 14 and pfSense 23.01/2.7 will handle that no problem.
Additionally in 23.01/2.7 priority tagged dhcp traffic will also be passed by bpf which is what was breaking connections to other ISPs. The only exception to that is the e1000 driver (em and igb) where vlan hardware filtering must be disabled due to a bug.But none of that applies to AT&T where the authentication requirement (currently) means you must use the netgraph script and doing so causes other issues. Such as the fact that the iflib e1000 driver doesn't seem to pass traffic with it.
-
@stephenw10 so why doesn't it work for ATT? What needs to be changed/fixed? Without netgraph.
-
There's two scenarios. For most users who have the AT&T device still connected something is required to forward the auth traffic to it and responses back and that requires netgraph or some equivalent setup.
If you have extracted the certs and are using WPA directly it might be possible. I have no way to test. I suspect bpf might get in the way still. Also there were reports of WPA for DHCP not working in other situations and since it's not supported in pfSense it's not something that gets tested.Steve
-
@stephenw10 I have working extracted certs and have done testing (see my post from 7days ago). It does not work in ATT/ pfsense which requires auth. The netgraph method has worked for me in 2.4.5, but as many know, it's not ideal being single threaded and as line speeds get faster, more resources are consumed.
-
What NIC are you using?
-
@fresnoboy When I tried it on ESXi 7 wireguard wasn't out and I wasn't terminating VPN tunnels on my pfsense, but I do remember there to be the same CPU usage delta between hypervisor and bare metal.
-
@gpz1100 I've never tried proxmox other than one time playing around with unraid which I believe runs proxmox under the covers.
Were you defining your vNIC's with your VLANs as "vlan aware"?In ESXi I would just assign the vlan 0 as well as set the MAC address to my att provided gateway MAC in the interface options for the virtual machine for the WAN interface and that was it. Didn't have to do anything on the pfsense guest itself outside of running a simple wpa_supplicant script to get a DHCP address from Att.
