server: pfsense 1.2.3 client openvpn gui 1.0.3 I used the 2.0 folder to create the keys, certs, etc

I'm willing to give it a go if you can point me in the right direction  :)

Had to wait a while to be able to upgrade the remote side, but I am happy to say that it is working just fine after updating to the latest snapshot on both sides. Thanks for your help jimp!

It won't simplify it, the routing on PSK is much simpler than SSL/TLS. The rest is a matter of preference.

Ok Jimp , i have modified the network like this 10.0.8.24/29 instead of 10.0.8.25/24 and now it is working. Probably the issue was the first time when i have defined the VPN … and now because some thinks are verified it's not working like in the past . Anyway i have understand where was the problem f I was careful from the beginning in defining correctly the whole discussion would not have made ​​sense. Great work guys , Thanks. Best Regards, Daniel

You could upgrade to pfsense 2.0. I believe its running OpenVPN 2.2 I can't speak for the devs, but I dont think they update packages for new features. Only for security updates.

Problem solved in a way. When I moved to SSL/TLS VPN with a certificate on both ends the tunnel worked perfectly, without making any other changes.

Problem was faulty router (ZyXEL 660H-T). For this and other oddities… Damned! It mede me crazy... Exchanged with an poor, old, unused d-link and all went fine.

I found a detail. If I attach OpenVPN to the WAN interface IP address (and not to one of the virtual IPs on the WAN interface) all trafic from clients work.

Thank you very much for the input. Okay, that makes sense as I have a perfectly fine connection. Maybe I should restart the router to confirm this 100% because the once restarted all routes will be lost. So, what are you thoughts about: "persist-key;persist-tun;resolv-retry infinite" Thanks,

If you use the same CA, then clients from one server will be able to access the other server. If you want them separate you need two CAs.

If they come in on the OpenVPN interface but don't leave LAN, then one of two things happened: 1. They were blocked by firewall rules somewhere 2. It went out a different interface that had a more specific route

Hi, thanks for your answer. I edited the client specific config as you can see in the following image. [image: 3OWF0.jpg] In this image you can see my routing tables on the PFSense: [image: 4ZXwo.jpg] These are the routing tables of my DD-WRT: [image: BZi6s.jpg] I really can't see the problem…

Weird, on the server it is setup as 10.2.200.0, so it shouldn't overlap.

Do you have this box checked? Dynamic IP Allow connected clients to retain their connections if their IP address changes.

Generated new files and it worked.  Thanks!

Anyone have any ideas?

I have started a tutorial topic: http://forum.pfsense.org/index.php/topic,35292.0.html