pfSense Plus 21.05.2
-
It is offered for SG-3100 units. I took it, no issues with the upgrade process.
-
@lohphat said in pfSense Plus 21.05.2:
It is offered for SG-3100 units. I took it, no issues with the upgrade process.
i did as well
-
Tried to upgrade but got stuck..
Console output:
Loading configuration...... ******************************************************************************* * WARNING! * * The current configuration has been created with a newer version of Netgate pfSense Plus * * than this one! This can lead to serious misbehavior and even security * * holes! You are urged to either upgrade to a newer version of Netgate pfSense Plus or * * revert to the default configuration immediately! * ******************************************************************************* done. Updating configuration...done. Checking config backups consistency.................................done. Setting up extended sysctls...done. Setting timezone...done. Configuring looplo0: link state changed to UP back interface...done. Starting syslog...done. Starting Secure Shell Services...done. Configuring switch...done. Setting up interfaces microcode...done. Starting PC/SC Smart Card Services...done. Configuring loopback interface...done. Creating wireless clone interfaces...done. Configuring LAGG interfaces...done. Configuring VLAN interfaces...done. Configuring QinQ interfaces...done. Configuring MGMT interface...done. Configuring LAN interface...done. Configuring WIFI interface...done. Configuring GUEST interface...done. Configuring WAN interface...done. Configuring IPsec VTI interfaces...done. Configuring CARP settings...done. Syncing OpenVPN settings...done. Configuring firewall......done. Starting PFLOG...done. Setting up gateway monitors...done. Setting up static routes...done. Setting up DNSs... ..Starting DNS Resolver...done. Synchronizing user settings...done. Starting webConfigurator...done. Configuring CRON...done. Starting NTP Server...done. Starting DHCP service...done. Starting DHCPv6 service...done. Configuring firewall......done. Generating RRD graphs...done. Starting watchdog daemon...done. Starting syslog...done. Starting CRON... done.Waited for 15 minutes, and nothing.. So connected to it by SSH and rebooted, it worked..
Patch afcc0e9c97c1993ae6b95f886665fcb4375d26c7 is no longer applied too..Netgate team, kindly share with us the release notes from this version, and also some directions regarding the pcscd patch, thanks.
-
Update LED on my 3100 flashing today, but I have not tried the update right now.
-
-
@nocling said in pfSense Plus 21.05.2:
Only for SG-6100.
Netgate Docs@mcury said in pfSense Plus 21.05.2:
Release notes: https://docs.netgate.com/pfsense/en/latest/releases/21-05-2.html
Specifically:
This is a maintenance release of pfSense® Plus software. pfSense Plus software version 21.05.2 corrects an issue with the pre-installed Netgate Firmware Upgrade package on Netgate 6100 hardware devices.The pfSense Plus software version number was increased for all models of Netgate hardware for consistency, but there are no functional changes for other hardware platforms. Upgrading a device in the field to 21.05.2 is not necessary at this time, but users may do so if they wish.(Wow, this is most difficult to use forum UI I've ever seen!)
-
Upgrading a device in the field to 21.05.2 is not necessary at this time, but users may do so if they wish.Wrong!
If you don't like the flashing LED on the 3100 you need to install the 21.05.2 "hotfix" ;) -
I mean you could disable the update check...or the LED itself.
But I wouldn't recommend that!The update is made available to all pfSense+ installs to keep everything running the same version.
Steve
-
@stephenw10 said in pfSense Plus 21.05.2:
I mean you could disable the update check...or the LED itself.
good hint!
The update is made available to all pfSense+ installs to keep everything running the same version.
Update went smooth and it's a 1100 not an 3100
-
Just did mine (SG-1100). Zero issues, fast restart.
