Can't ping WAN IP address

[devwinner-sek]

@viragomann
Thanks for the help.

The rule : LAN net from any protocol to any is a default rule on Pfsense LAN interface. We haven't deleted this rule.

I have also updated today Pfsense to version 2.5.2. But still have the same problem.

[johnpoz]

@devwinner-sek Well if you lan rule is default any any - and your on the lan network you would for sure be able to ping your wan IP.

If you can not, then can you even ping the Lan IP? You sure your pinging the correct wan IP? Unless you put a floating rule to block, or you have some other rule above the default lan rule - did you happen to enable block rfc1918 on your lan or bogon.. Seen users do that - haven't a clue in the world why anyone would do such a thing.. But have seen it multiple times.. Either of those things could prevent you from pinging the wan.

Why don't you actually post up your rules - other thing you sure your not forcing traffic out some gateway, that can not get to your wan IP, etc..

[devwinner-sek]

@johnpoz said in Can't ping WAN IP address:

rfc1918

Hello johnpoz.

Like i said, the ping of the WAN IP of Pfsense only is working.
Ping to other WAN Ip address doesn't work.
I don't have rfc1918 block rule on my Pfsense

Images of my rules

[viragomann]

@devwinner-sek
You have to go to Interface > Assignments and add and activate the bridges.

[devwinner-sek]

@viragomann

ok.

I think the bridges interfaces are yet enabled

Image Interface Assignments

[viragomann]

@devwinner-sek
No. If they were you would see them here.

Open the drop-down at "Available network ports", select the bridge you have configured before, hit Add, open the new interface and enable it.

[devwinner-sek]

@viragomann

Ok.
I have enabled the bridges interfaces.
Still have ping issue on other WAN IP address.

Images interfaces

Images poing from LAN VM

[devwinner-sek]

@devwinner-sek

But ping from WAN IP to WAN IP is working.

Ping from LAN IP to Pfsense WAN IP is working

[viragomann]

After changing interface configuration it's recommended to reboot the box.

@devwinner-sek said in Can't ping WAN IP address:

Still have ping issue on other WAN IP address.

What is this other address assigned to? To a DMZ device?

[devwinner-sek]

@viragomann

Ok. Thanks.

I have restarted the server. Problem not solved.

The other address i want to ping is a public ip. It is linked to DMZ interface.