Atheros Chipset Issues
-
Well as recommended I am using the latest snapshot…. "pfSense-20080729-0437.iso.gz 29-Jul-2008 01:32 40M" and still the disconnect issue remains....
hostapd: ath0: STA 00:1d:4f:27:62:09 IEEE 802.11: deauthenticated due to local deauth request
Is there a plan for a fix on this issue?
TIA!
-
It looks like this has been an issue in various cases long before 1.2.1. I've never personally seen it, if you can provide specific information on how to replicate and I can replicate it, we might be able to report it to one of the FreeBSD lists and get a resolution.
-
After I fire up my iTouch Instantly I see this in my logs…
Aug 4 07:39:04 hostapd: ath0: STA IEEE 802.11: associated
Aug 4 07:39:05 hostapd: ath0: STA WPA: pairwise key handshake completed (WPA)
Aug 4 07:39:05 hostapd: ath0: STA WPA: group key handshake completed (WPA)
Aug 4 07:39:05 hostapd: ath0: STA WPA: group key handshake completed (WPA)
Aug 4 07:40:07 hostapd: ath0: STA WPA: received EAPOL-Key 2/2 Group with unexpected replay counter
Aug 4 07:40:07 hostapd: ath0: STA WPA: group key handshake completed (WPA)
Aug 4 07:41:05 hostapd: ath0: STA WPA: group key handshake completed (WPA)
Aug 4 07:42:08 hostapd: ath0: STA IEEE 802.11: deauthenticated due to local deauth request
From shell
athstats
1263011 data frames received
2116051 data frames transmit
14129 tx frames with an alternate rate
124432 long on-chip tx retries
1427 tx failed 'cuz too many retries
48M current transmit rate
9575 tx management frames
3 tx frames discarded prior to association
35 tx frames with no ack marked
2112443 tx frames with short preamble
542247 rx failed 'cuz of bad CRC
4975313 rx failed 'cuz of PHY err
222509 OFDM timing
4752796 CCK timing
8 CCK restart
1153264 beacons transmitted
4041 periodic calibrations
-1 rssi of last ack
26 avg recv rssi
-96 rx noise floor
14 cabq frames transmitted
7682 switched default/rx antenna
Antenna profile:
[1] tx 201288 rx 51144
[2] tx 1913327 rx 1232991cat hostapd_ath0.conf
interface=ath0
driver=bsd
logger_syslog=-1
logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=0
dump_file=/tmp/hostapd_ath0.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=wheel
#accept_mac_file=/tmp/hostapd_ath0.accept
#deny_mac_file=/tmp/hostapd_ath0.deny
#macaddr_acl=
ssid=pfSense-nUll
debug=
auth_algs=1
wpa=1
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
wpa_group_rekey=60
wpa_gmk_rekey=3600
wpa_strict_rekey=
wpa_passphrase=******************t
ieee8021x=
#Enable the next lines for preauth when roaming. Interface = wired or wireless interface talking to the AP you want to roam from/to
#rsn_preauth=1
#rsn_preauth_interfaces=eth0#cat ath0_setup.sh
#!/bin/sh
pfSense wireless configuration script.
enable shell debugging
set -x
/bin/ps awwuxx | grep hostapd | grep ath0 | awk '{ print $2 }' | xargs kill/sbin/ifconfig ath0 down
/sbin/ifconfig ath0 mediaopt hostap
/sbin/ifconfig ath0 mode '11g'
/sbin/ifconfig ath0 channel '6'
/sbin/ifconfig ath0 -mediaopt turbo
/sbin/ifconfig ath0 ssid 'pfSense-nUll'
/sbin/ifconfig ath0 -hidessid
/sbin/ifconfig ath0 -mediaopt adhoc
/sbin/ifconfig ath0 protmode 'rtscts'
/sbin/ifconfig ath0 mode 11g pureg
/sbin/ifconfig ath0 -apbridge
/sbin/ifconfig ath0 -wme
/sbin/ifconfig ath0 authmode open wepmode off
/sbin/ifconfig ath0 txpower '70'
/sbin/ifconfig ath0 mtu 1500
/sbin/ifconfig ath0 up
/usr/sbin/hostapd -B /var/etc/hostapd_ath0.confThank you for your reply and attention to this matter!
-
By the way the card specs…
802.11a/b/g WLM54SAG mPCI
Witha a ALIX 2c3 Board. -
The iPhone and iPod Touch must use TKIP with WPA, you probably just have a configuration they aren't compatible with. I'm not sure why it is that they won't work unless you set it to TKIP, but that's what I do and what others have reported on here.
This also is the case with AirTunes, though my Mac mini G4 will connect regardless of that setting.
-
I would like to add Dell's wireless print server 3300 to this list. I had to set pfSense to use TKIP only. If I tried to set the option to both AES and TKIP(option "Both") I would get that error.
Edit: I had to edit my post it initially stated "the option to both WPA and TKIP(option "Both")". Sorry for any mix up.
-
Thank You for all the reply's…
@cmb:Here are the settings I have been using...
General configuration
Type - StaticBridge with - none
IP Address - 10.30.2.1/24Standard - 802.11g
Mode - Access Point
802.11g OFDM Protectione Mode - Protection Mode RTS and CTS
802.11g only - Is checked.
Transmit Power - 70mW - It seems that at this range I get better reception and less disconnects...
Channel - 11g Turbo - 6 - Also is the most stable channel I can get any thing else I use it grabs the wireless and makes it more unstable.
WPA - Enable
WPA Mode - WPA
WPA Key Management Mode - Pre Shared Key
Authentication - Open System Authentication
WPA Pairwise - TKIP
Key Rotation - 60
Master Key Regeneration - 3600
Any suggestions to make my system more stable? I have been using TKIP since day one...
I have 2 iTouch one is running Firmware v 2.0 and the other 1.1.4 or something around that range... But both seem to experience the same disconnect issue the 1.1 more than tha 2.0
Thank You all for your attention.
-
my iphone 3g connects to ddwrt ap with wpa2/aes just fine
-
my iphone 3g connects to ddwrt ap with wpa2/aes just fine
DD-WRT is Linux… Where pfSense is FreeBSD.
-
I know, what I meant is that it works with ads too not just tkip
-
In FreeBSD 7.0 based releases, I no longer have to force TKIP for my iPod Touch and AirTunes to work properly, they work fine on Any now.
-
Is this on the latest Update?