Host OverRide for UnFi APs

MagikMark

@johnpoz

I'm putting the AP in another interface. I have a 4 port NIC.

192.168.1.1 - WAN
10.0.1.1 - LAN (Htpc)
10.0.2. 1 - AP multi SSID
192.168.1.2 - Failover WAN

As much as I would like to put the controller and AP in one network, I don't have available switch at the moment.

I would appreciate if you have tweaks and tips to share to make pfsense and U6 work seemlessly

johnpoz

@magikmark well use the L3 Adoption method that was linked too above.

Order a switch.. the little 5 port unifi flex mini is $30..

MagikMark

@johnpoz

Thanks. May I ask why it's called level 3 adoption?

johnpoz

@magikmark because your adopting the AP that resides on a different L3 than your controller.

NogBadTheBad

@magikmark Nope as I mentioned I ditched Unifi a while back.

https://community.ui.com/questions/pfSense-DHCP-provision-option/b42003ce-7560-4680-8731-805e59459bfc

johnpoz

@magikmark said in Host OverRide for UnFi APs:

Do you have a step by step guide?

The step by step guide is given on the link to the L3 adoption - they even provide a pfsense example for setting the dhcp option 43

stephenw10

Either SSHing into the access point and setting the inform url or setting a host override in pfSense for 'unifi' should work there. I have done both, neither was especially difficult.

Steve

MagikMark

This post is deleted!

MagikMark

Guys,

LAN: 10.0.1.1
HTPC: 10.0.1.2
Asus: 10.0.2.1
UniFi: 10.0.3.1

SSH

Can't even ssh to the device. I could see U6 in dhcp leases in has an ip of 10.0.3.5. Turned ssh in pfsense. on I can ssh my pfsense box
Doesn't respond to ping
Firewall Rule all ports open, any protocol, any source and any destination

DNS

I have Adguard installed. Is there an effect?

DNS Resolver Entry

Host: unifi
Domain: HTPC.pfSense.mylocal
IP add: 127.0.0.1 or 10.0.1.1 or 10.0.1.2

DHCP Option 43:

Set this under Unfi Interface
Number: 43
DCHP Option: 43
Type; String
Value: 01:04:0a:00:01:01 (10.0.1.1)
01:04:7f:00:00:01 (127.0.0.1)

Light still steady white. Can't be discovered by the controller
Maybe I missed something? Perhaps rule?

stephenw10

If you connect anything else to the same subnet does it pull a valid dhcp lease?

The AP could be unable to respond for some reason.

Steve

MagikMark

@stephenw10

Yes I used to have Netgear / Asus and working fine. Trying to upgrade to Wif6 enterprise grade. Chose Unfi

I thought maybe some configuration since U6 is fairly new

I have echo reply blocked in floating rules. Dunno if it has some effect

The rest of my Floating rules are:

Blocked Ips from Firehol

I have QOS / limiter running as well

stephenw10

Can we see screenshots of those rules and firewall logs?

MagikMark

@stephenw10

Floating Blocked.JPG Floating Allow.JPG

For the firewall log:

Its kinda long. It only shows blocking ipv6 on my wirelesslan (asus)

johnpoz

@magikmark so you run all your rules in floating.. So there is really no way to know even what direction they are in? Other than your description there saying outgoing or incoming

So in what possible scenario would wirelesslan be an outgoing interface towards whatever is in firehol level 1?

First thing I would suggest is get rid of ALL of those... You understand use of "this firewall" is every IP of the firewall right? But in what scenario would these interfaces be used in the out direction htpc and wirelesslan? Or how would these what I assume are external sources in your aliases be inbound into those interfaces?

What are the rules on your actual interfaces.. Please delete all those rules and show us the rules on your actual interfaces.. You can put your whatever those are suppose to be and do back after you actual have stuff working..

Most of those rules don't even have any hits.. they are all 0/0