Dpinger and LTE alerts
-
First thank you for developing and maintaining your package for pfsense.
Can you increase the limits on latency thresholds? About 6 times a day my cell towers switch and I get between a 3500 and 4000ms latency bump and then it goes back to sub 200ms. I'm flooded with alerts. As far as I can tell, there is a limit in the GUI at least to keep latency numbers less than 2000ms.
Can that be increased (~10s?) or even have the option not to have latency alerts, just packet loss? I can tweak packet loss percentage by changing probe frequency (now 30s). This is a backup gateway.
Thanks,
Devan
-
You can access the dpinger configuration used to start dpinger in System -> Routing -> Gateways.
-
If I enter a value greater than 2000, it reports that the low latency needs to be lower than the high latency. 1999 or less is accepted.
-
@ddbnj You will want to adjust both the low and high.
https://docs.netgate.com/pfsense/en/latest/routing/gateway-configure.html
-
This post is deleted! -
