Routing traffic from single host through VPN

[mazarian]

Hi all,

I know this topic has been discussed several times throughout this forum, but I'm having an issue that I can't seem to fix.  I am trying to route all traffic from a specific internal host through a VPN and prevent it from going through the WAN gateway, should the VPN be down.  If I set my LAN rule to drop or reject, all outbound traffic from the host is blocked, however, if I set it to Pass (using the options set below), it goes through the WAN and not the VPN.

Please let me know if you need additional information and THANK YOU in advance!

Here is my setup:

• VPN is setup as gateway

• Lan Rule:
    Action: Pass
    Interface: Lan
    Address Family: IPv4
    Protocol: any
    Source: Single Host: 192.168.3.8
    Destination: any
    Advanced Settings:
      Tag: NO_WAN_EGRESS
      Gateway: VPNGW - xxx.xxx.xxx.xxx

• Floating Rule:
    Action: Block
    Quick: Apply the action immediately on match (checked)
    Interface: Lan
    Direction: any
    Address Family: IPv4+IPv6
    Protocol: any
    Source: any
    Destination: any
    Advanced Options:
      Tagged: NO_WAN_EGRESS

• NAT Outbound Rules (Hybrid OUtbound NAT rule generation enabled):
    Interface: VPNINT
    Protocol: Any
    Network: 192.168.3.0/24
    Destination: any
    Translation Address: Interface Address