New PFSense Configuration with Multiple Public Subnets

[N3tg4t3N3wb]

Hello,

I have been unsuccessful in finding documentation or a tutorial with the following setup;

WAN: 123.456.789.1/30
LAN: 123.456.123.1/24
LAN: 10.0.0.1/24

For example: I would like to 1:1 NAT the public 123.456.123.2/24 to the internal 10.0.0.2/24 and create a firewall rule to only allow port 22 to be open on said public address.

Has anyone tried a similar setup like this where you have multiple blocks not contiguous?

Greatly appreciate any assistance!