DHCP reservation - GW
-
@stephenw10 thats funny actually I didn't recall that thread at all ;) But this is really just a rehash of that thread ;) and I had suggested doing what you had said about pool to none, and set reservations for those that want a gateway..
-
Tried it out on an old iPad. Still getting a GW, but it may need a more aggressive approach to get past Apple being helpful.
I like the approach and will try the same trick to not give DNS servers to the cameras.Thank you for searching better than I did...
o||||o
7100-1u -
Maybe the value type there should be IP address.
-
@andyrh ok just tried this on my windows pc.
So I set it to dhcp, got a lease with gateway per dhcp scope, etc
Then set up a reservation for 192.168.9.66, and set option 3 with nothing.. and released and renewed and got the .66 address, but no gateway..
-
Ah, nice!
-
@stephenw10 yeah that seems to be a good option for sure when you don't want a client to have a gateway. I think that should work for @AndyRH
-
Something went wrong around 13:50 and DHCP became corrupted. Had to restore it. (remember kids, backups are for fun, restores are serious)
I have a new weekend project...
Lots of 89884 messages then a crash. A restart did not work so I went to the backup.
Jan 3 13:59:06 dhcpd 89884 /etc/dhcpd.conf line 579: unexpected end of file
Jan 3 13:59:06 dhcpd 89884 ^
Jan 3 13:59:06 dhcpd 89884 }
Jan 3 13:59:06 dhcpd 89884 /etc/dhcpd.conf line 577: semicolon expected.
Jan 3 13:59:06 dhcpd 89884 For info, please visit https://www.isc.org/software/dhcp/
Jan 3 13:59:06 dhcpd 89884 All rights reserved.
Jan 3 13:59:06 dhcpd 89884 Copyright 2004-2021 Internet Systems Consortium.
Jan 3 13:59:06 dhcpd 89884 Internet Systems Consortium DHCP Server 4.4.2-P1
Jan 3 13:55:37 dhclient 18922 Creating resolv.conf
Jan 3 13:55:37 dhclient 18587 RENEW
Jan 3 13:50:37 dhclient 47334 Creating resolv.conf
Jan 3 13:50:37 dhclient 47085 RENEW -
Hmm, just by adding the option value to a static mapping?
-
@stephenw10 That is my guess. I will test it this weekend.
-
I finally got back to this. I was not able to reproduce the problem. It is now working as expected.
-
Just in case someone wonders by...
If the DHCP scope has a GW value of "none", if you do not specify a GW in a static mapping the host will not get a GW. -
Ah, yes that would do it. The static values override whatever is in the main config. So leaving it empty there would not override 'none' set in the main config.
Steve
