[solved] pfSense (2.6.0 & 22.01 ) is very slow on Hyper-V

Bob.Dig

@dd said in After Upgrade inter (V)LAN communication is very slow (on Hyper-V).:

because now is not pfSense 2.6 (and Plus) useable on Hyper-V.

Thanks for your heads-up regarding OPNsense and FreeBSD Version. But there are many people using the newest pfSense on hyper-v, they resolved their problems it seems, although I don't know what they are exactly doing with it. If you only use it as a firewall and not as a router, that would still work here too or lets say for me at least, your WAN-Speed was and is also affected.

So why is it so different, really making no sense to me.

@dd said in After Upgrade inter (V)LAN communication is very slow (on Hyper-V).:

but they must something to do

I don't think so, we are not paying them and hyper-v isn't used much anyway, so... no.

stephenw10

Are you able to test FreeBSD 12.3 in a similar config?

Bob.Dig

@stephenw10 I can't. Is in the current release this already patched? I can't tell for sure, would be helpful to know.

stephenw10

No, that patch is not in 22.01 or 2.6.

https://github.com/pfsense/FreeBSD-src/tree/RELENG_2_6_0/sys/dev/hyperv/pcib

It's not yet in 22.05/2.7 either.

Steve

Bob.Dig

@dd said in After Upgrade inter (V)LAN communication is very slow (on Hyper-V).:

@bob-dig They have new version 22.1 which is based on FreeBSD 13 and it's working ok. I have tried it. I think that problem with pfSense 2.6 is because it's based on FreeBSD 12.3. Same problem is with pfSense 2.7.0-DEVELOPMENT which is on FreeBSD 12.3 too. I think, fix will not be available for longer time but they must something to do because now is not pfSense 2.6 (and Plus) useable on Hyper-V.

I can 100% confirm this, tried it myself. I could also enable all offloading there.

This is from a VM with 4 Cores on another VLAN (and host).

What I had to do on both is disabling VMQ in the virtual NICs in hyper-V, otherwise there were some error messages in the console.

So no problem with FreeBSD 13 on Hyper-V (Server 2022) with the other thingy.

stephenw10

Can anyone seeing this test FreeBSD 12.3 directly?

This could be a simple fix if it's something we are setting in pfSense. Though I'm not sure what it could be.

Steve

m0nji

Just did a simple test

First screenshots shows 2 Windows VMs connected through pfSense 2.6.0(fresh and clean install), all running on Hyper-V.

Second screenshots shows 1 Windows VM connected to a clean FreeBSD 12.3 Install, all running on Hyper-V

stephenw10

Do you see the same thing using iperf3 -c 192.168.189.10 -R as you do if you run the client on 192.168.189.10?

That opens the states the other way so it would be interesting to see if it fails in the opposite direction.

Steve

Bob.Dig

Dammit, if I only knew about the -R thing earlier.

m0nji

@stephenw10
Sure that you want to have a iperf test when the test does not even leave the vm? But no problem:

Here also the tests again from both VMs with the pfSense in between

And also a test between both VMs without pfSense (on the same subnet)

m0nji

If it helps, i also did a test from the Windows VM to the pfSense 2.6.0 VM directly

Thats kind of interesting. So that means the problem just exist when pfSense is in between, doing routing, but it does not exist when the pfSense is a direct target/source. This would also explain, why i don't see this weird results when i do the test with the FreeBSD VM (1st post, second screenshot)

m0nji

Ok did some further testing and i think i can confirm that the problem is FreeBSD 12.3 related, not pfSense specific.

I configured 2 FreeBSD VMs, one 12.3 and one 13.0 with Routing enabled (gateway_enable="YES") so that they can simulate the pfSense.

I then did iperf tests:

Win VM (192.168.189.10) --> FreeBSD 12.3 VM (192.168.187.250 / 192.168.189.250) --> Win VM (192.168.187.11)

PS C:\Users\m0nji\Downloads\iperf-3.1.3-win64\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.187.11
Connecting to host 192.168.187.11, port 5201
[  4] local 192.168.189.10 port 58723 connected to 192.168.187.11 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   254 MBytes  2.13 Gbits/sec
[  4]   1.00-2.00   sec   268 MBytes  2.25 Gbits/sec
[  4]   2.00-3.00   sec   282 MBytes  2.37 Gbits/sec
[  4]   3.00-4.00   sec   302 MBytes  2.53 Gbits/sec
[  4]   4.00-5.00   sec   304 MBytes  2.55 Gbits/sec
[  4]   5.00-6.00   sec   304 MBytes  2.55 Gbits/sec
[  4]   6.00-7.00   sec   297 MBytes  2.49 Gbits/sec
[  4]   7.00-8.00   sec   302 MBytes  2.54 Gbits/sec
[  4]   8.00-9.00   sec   294 MBytes  2.47 Gbits/sec
[  4]   9.00-10.00  sec   301 MBytes  2.52 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  2.84 GBytes  2.44 Gbits/sec                  sender
[  4]   0.00-10.00  sec  2.84 GBytes  2.44 Gbits/sec                  receiver

iperf Done.
PS C:\Users\m0nji\Downloads\iperf-3.1.3-win64\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.187.11 -R
Connecting to host 192.168.187.11, port 5201
Reverse mode, remote host 192.168.187.11 is sending
[  4] local 192.168.189.10 port 58726 connected to 192.168.187.11 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec  55.6 KBytes   449 Kbits/sec
[  4]   1.01-2.01   sec  21.4 KBytes   175 Kbits/sec
[  4]   2.01-3.00   sec  21.4 KBytes   178 Kbits/sec
[  4]   3.00-4.01   sec  21.4 KBytes   173 Kbits/sec
[  4]   4.01-5.01   sec  17.1 KBytes   140 Kbits/sec
[  4]   5.01-6.01   sec  21.4 KBytes   175 Kbits/sec
[  4]   6.01-7.01   sec  21.4 KBytes   175 Kbits/sec
[  4]   7.01-8.01   sec  21.4 KBytes   176 Kbits/sec
[  4]   8.01-9.01   sec  15.7 KBytes   128 Kbits/sec
[  4]   9.01-10.01  sec  20.0 KBytes   163 Kbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.01  sec   384 KBytes   314 Kbits/sec                  sender
[  4]   0.00-10.01  sec   237 KBytes   194 Kbits/sec                  receiver

iperf Done.

Win VM (192.168.189.10) --> FreeBSD 13.0 VM (192.168.187.251 / 192.168.189.251) --> Win VM (192.168.187.11)

PS C:\Users\m0nji\Downloads\iperf-3.1.3-win64\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.187.11
Connecting to host 192.168.187.11, port 5201
[  4] local 192.168.189.10 port 49997 connected to 192.168.187.11 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   268 MBytes  2.25 Gbits/sec
[  4]   1.00-2.00   sec   300 MBytes  2.51 Gbits/sec
[  4]   2.00-3.00   sec   316 MBytes  2.65 Gbits/sec
[  4]   3.00-4.00   sec   316 MBytes  2.65 Gbits/sec
[  4]   4.00-5.00   sec   318 MBytes  2.67 Gbits/sec
[  4]   5.00-6.00   sec   316 MBytes  2.65 Gbits/sec
[  4]   6.00-7.00   sec   317 MBytes  2.66 Gbits/sec
[  4]   7.00-8.00   sec   319 MBytes  2.68 Gbits/sec
[  4]   8.00-9.00   sec   319 MBytes  2.67 Gbits/sec
[  4]   9.00-10.00  sec   316 MBytes  2.65 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  3.03 GBytes  2.60 Gbits/sec                  sender
[  4]   0.00-10.00  sec  3.03 GBytes  2.60 Gbits/sec                  receiver

iperf Done.
PS C:\Users\m0nji\Downloads\iperf-3.1.3-win64\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.187.11 -R
Connecting to host 192.168.187.11, port 5201
Reverse mode, remote host 192.168.187.11 is sending
[  4] local 192.168.189.10 port 49999 connected to 192.168.187.11 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   326 MBytes  2.73 Gbits/sec
[  4]   1.00-2.00   sec   324 MBytes  2.72 Gbits/sec
[  4]   2.00-3.00   sec   337 MBytes  2.83 Gbits/sec
[  4]   3.00-4.00   sec   340 MBytes  2.85 Gbits/sec
[  4]   4.00-5.00   sec   337 MBytes  2.83 Gbits/sec
[  4]   5.00-6.00   sec   340 MBytes  2.85 Gbits/sec
[  4]   6.00-7.00   sec   341 MBytes  2.86 Gbits/sec
[  4]   7.00-8.00   sec   342 MBytes  2.87 Gbits/sec
[  4]   8.00-9.00   sec   342 MBytes  2.87 Gbits/sec
[  4]   9.00-10.00  sec   342 MBytes  2.87 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  3.29 GBytes  2.83 Gbits/sec                  sender
[  4]   0.00-10.00  sec  3.29 GBytes  2.83 Gbits/sec                  receiver

iperf Done.

stephenw10

Ah, nice. Ok, I wonder what changed in 12.3 then. Hmm.

@m0nji said in After Upgrade inter (V)LAN communication is very slow (on Hyper-V).:

Sure that you want to have a iperf test when the test does not even leave the vm?

No sorry I meant swap the server and client iperf machines to see if opening the states the other way changes the direction that is slow. It seems very likely it will though.

Steve

Bob.Dig

Let's hope netgate will ditch 12.3 sooner than later...

provels

Maybe it's been mentioned already, but I have read at altaro.com that the VMQ feature can be problematic. I have it disabled and have no issues, but I'm also running an i340-T4 on 2012R2. Maybe MS has fixed it. YMMV

Article at Altaro, skip to Culprit #2

cannyit

@rmh-0 Thanks, also sovled it in my environment. Happy to be back on normal performace.

Bob.Dig

Because none of this helped in my case, I tried dda a quad-port-intel 1G-NIC into pfSense. This worked, so I was able to use no virtual NICs at all in pfSense. My test Windows-VM is still using a virtual adapter but now has to go through a physical switch every time... with that, everything is working like it should. Now I hope I can dda my 10G-NIC in pfSense too.

rgijsen

Just for some additional info:
We run pfSense in HA (carp) on 2 Hyper-V gen2 VM's. Both run on Hyper-V 2022. Both on HPe DL360 Gen10 hardware, both with 2 HPE FlexFabric 10Gb 2-port 556FLR-SFP nics, that are teamed in a VSwitch SET with dynamic loadbalancing on the nics (Switch Embedded Teaming, no LACP). We always disable RSC during the install scripts, as it gave us nothing but troubles. VMQ is not enabled for the pfSense VM's either, as in the past it didn't work with VMQ anyway. For the love of God I cannot replicate this issue of slow intervlan traffic.

However, a colleage-company we work with have this issue on their internal network. Now, that is a gen1 VM on a DL360 gen9, with a SET team on the 4 regular internal HPe 331i nics, but with Hyper-V port balancing. They have two Hyper-V nodes (clustered) and their pfSense 2.6.0 VM is on one of those nodes. They have a hardware NAS accessible through SMB. Now, accessing that NAS (different VLAN) is slow as molasses, BUT ONLY when the VM accessing the NAS is on the same host as the pfSense VM. When we move the VM, or pfSense to the other node, poof everything is up to linespeed again. We move the two VM's back together and it's turdspeed again.

When we access a SMB share from physical machines in another VLAN, when we run the VM with the SMB share on the same Hyper-V host as pfSense 2.6, access to that share is super slow. When we move that VM to another host, it all works fine. So for this specific environment it seems like the inter-vlan routing performance is only bad if those VMs reside on the same host as pfSense.

Needless to say it all works fine with 2.5.x.

The one thing I see in common with at least one person in this thread is that the problem pfSense runs on HPe Gen9 hardware. Are there more people running on Gen9 with issues? If you guys use a SET team, what is the load balancing mode?

m0nji

@cannyit you fixed your slow WAN speed but not the inner vlan routing?!
I think it needs two separate threads because we are talking about 2 different problems

m0nji

@rgijsen no i was using a lab system (Ryzen based Windows 11 Pro with Hyper-V enabled and 10Gig Asus Nic)