Going nuts with DNS over OpenVPN

gelcom

@dma_pf said in Going nuts with DNS over OpenVPN:

When you do an "extended" dns leak test in this site what are the results? https://www.dnsleaktest.com

Kindly note "São Paulo, Brazil" is local pf and not remote VPN.

stephenw10

Can we see a screenshot of the firewall rules on Interface_VMs_through_A. Assuming that is where you're testing from.

Steve

gelcom

@stephenw10 said in Going nuts with DNS over OpenVPN:

Do you control the server end of these tunnels?
If not they are almost certainly pushing a default route to connecting clients and it you don't reject it the pfSense default route will be changed.

Yes, I do. OpenVPN server is a VM on my Oracle Cloud.

Pls note my openvpn server.conf:

port 1194
proto udp
dev tun
user nobody
group nogroup
persist-key
persist-tun
keepalive 10 120
topology subnet
server XX.XXX.XXX.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "dhcp-option DNS 1.1.1.1"
dh none
ecdh-curve prime256v1
tls-crypt tls-crypt.key
crl-verify crl.pem
ca ca.crt
cert server.crt
key server.key
auth SHA256
cipher AES-128-GCM
ncp-ciphers AES-128-GCM
tls-server
tls-version-min 1.2
tls-cipher TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256
client-config-dir /etc/openvpn/ccd
status /var/log/openvpn/status.log
verb 3

Never use 'any' as the source in Outbound NAT rules if you can possibly avoid it (and you can). It can catch unexpected traffic, like traffic from the firewall itself.
You shouldn't have outbound NAT rules on the internal interfaces.

Ok! Corrected source to Interface_VMs_through_A subnet

Consider using a different DNS serer locally. By using 1.1.1.1 everywhere you are creating routing conflicts and making it far more difficult to diagnose the issues.
You want clients on those interfaces to use only 1.1.1.1 for DNS and to route those queries over VPN.

Indeed. I changed local pfsense DNS servers to google (8.8.8.8 and 8.8.4.4) and I kept openVPN to Cloudfare (1.1.1.1).

With all these corrections problems persists:

When I run https://www.dnsleaktest.com on local machine it points correctly to google DNS and local location (São Paulo).

When I run the test on "Interface_VMs_through_A" machine it shows the same WAN address (incorrect) with Cloudfare DNS (correct).

Still leaking.

Can we see a screenshot of the firewall rules on Interface_VMs_through_A. Assuming that is where you're testing from.

Sure. Here we go

Please note I keep seeing logs in this interface pointing to 1.1.1.1 with a rule name I don't have: NEGATE_ROUTE: Negate policy routing for destination (10000001) .

Maybe this "hidden" rule is leaking my DNS?

kind regards

stephenw10

@gelcom said in Going nuts with DNS over OpenVPN:

NEGATE_ROUTE: Negate policy routing for destination (10000001) .

Ah, it's because you have or had set 1.1.1.1 as a DNS server for pfSense with a gateway and that adds a static route to it creating the conflict triggering the negate rules. If you reboot removing that route it will probably go away but to be sure (or to not reboot) go to Sys > Adv > Firewall&NAT and set 'Disable Negate rules'.

Steve

stephenw10

Actually, ironically, it's probably because you're pushing 1.1.1.1 as a DNS server from the OpenVPN server which means it is included in the VPN networks alias.
Disabling negate networks should prevent it anyway.

Steve

gelcom

@stephenw10 said in Going nuts with DNS over OpenVPN:

Ah, it's because you have or had set 1.1.1.1 as a DNS server for pfSense with a gateway and that adds a static route to it creating the conflict triggering the negate rules. If you reboot removing that route it will probably go away but to be sure (or to not reboot) go to Sys > Adv > Firewall&NAT and set 'Disable Negate rules'.

Rebooting pf did not the trick but checking Disable Negate rules did.

Now leakdns shows remote openvpn ip and remote location. GREAT!!!

Is this an expected behavior on pf?

With this option turned on should I expect any other changes on pfSense?

Isn't possible to remove that "hidden" static route instead of enabling this option?

kind regards

stephenw10

Check the routing table to see where 1.1.1.1 is added.
But it's probably because your servers are configured to pass is to the clients and your clients are NOT configured to reject routes.

But in a setup like yours you should disable negate networks anyway since you are relying on policy routing for isolation.

Steve

gelcom

@stephenw10 said in Going nuts with DNS over OpenVPN:

Check the routing table to see where 1.1.1.1 is added.

No entries for 1.1.1.1 ....

stephenw10

Might be used in an IPSec tunnel if you have any defined. It pretty much has to be a subnet used somewhere in a VPN config to hit that rule.

Steve

gelcom

I don’t know. I don’t have any other vpns setup.

Anyway…

Thanks for the support.

@stephenw10: I owe you a beer!!! :-)

Problem is solved.

Kind regards