VMware Workstation VMs Web Traffic Being Blocked
-
@dfinjr yeah that is normal...
1514 would be the frame size with a 1500 mtu..
If your not seeing this, then something is OFF.. while sure you can see smaller sized frames... But when you move large amounts of data, say loading pictures or something off amazon or doing a speedtest, etc. etc.. Your going to at some point get to max out your mtu, and this should be what you just posted. Not 1434 ;)
Unless you were talking to something over the internet, and your path had a lower mtu at some point in the path.. Path discovery was mentioned somewhere in the thread... So unless you got some weird ass internet connection.. But again those connections normally have a standard like PPPoE etc. has slightly lower mtu.. If you were over a vpn, sure again lower mtu... But 1434 is just ODD!! not any standard that I am aware of anywhere.
-
@johnpoz said in VMware Workstation VMs Web Traffic Being Blocked:
But when you move large amounts of data, say loading pictures or something off amazon or doing a speedtest, etc. etc.. Your going to at some point get to max out your mtu, and this should be what you just posted. Not 1434 ;)
I'd expect smaller frame sizes if something (e.g., VMware) is throttling the amount of CPU available for various tasks, or is just saturating the CPU. I presume VMware also throttles I/O traffic to maintain quality of service among several VMs. It might be interesting to turn off all but 1 VM and see whether the problem persists.
-
@bpsdtzpw said in VMware Workstation VMs Web Traffic Being Blocked:
I'd expect smaller frame sizes if something (e.g., VMware) is throttling the amount of CPU available for various tasks
why would you think that - that makes zero sense.. Smaller mtu would mean actually more work to do..
-
I am just wondering. What do you think is going on? I understand a bit clearer now from what you said is normal but you also say something is off and I totally get why you're saying that but what is your gut response on to what is happening in my lab?
@bPsdTZpW
Current testing all VMs are off but one. Same animal of a problem is still showing up sadly. -
I'd expect smaller frame sizes if something (e.g., VMware) is throttling the amount of CPU available for various tasks
why would you think that - that makes zero sense.. Smaller mtu would mean actually more work to do..
I didn't mean a smaller MTU. I meant smaller actual frames being used because there just isn't enough of a required resource (e.g., I/O bandwidth, CPU time) to fill out every frame to the full MTU. This also might have to do with latency management in the virtual environment.
-
@bPsdTZpW
Current testing all VMs are off but one. Same animal of a problem is still showing up sadly.Hmm. Are there any VMware logs, especially performance/QOS logs? If so, it might be interesting to see whether VMware is throwing any errors, or unexpectedly throttling resources.
-
@bpsdtzpw said in VMware Workstation VMs Web Traffic Being Blocked:
I meant smaller actual frames being used because there just isn't enough of a required resource
What? Look up frame and mtu ;)
-
@dfinjr said in VMware Workstation VMs Web Traffic Being Blocked:
what is your gut response on to what is happening in my lab?
I have no idea to be honest - never seen such a thing.. I sure can not reproduce it here, I installed workstation 16.2.2 and works just fine, you saw my sniffs, etc.
I showed you were to check if mtu had had been changed.. I am at a loss to why what your seeing would be happening..
-
Thank you for your opinion. I feel essentially the same way, can't nail down what is happening. Please let me know if any other ideas. I am going to continue troubleshooting here and there aiming for resolution to this weird problem but ultimately I'll have to make a decision in the next few weeks as that is what is left in my return policy for the appliance.
I think this goes without saying but I want to keep it if I can figure out how to get it all to play ball :). I'll keep fighting, I got time left.
If you think of anything that I can supply you for a random troubleshooting thought please done hesitate.
I do have one other sub option which would be to purchase the direct support for $400 and see if they can pull off something we didn't. Any reason from your opinion to think that they may be able to get further than we did?
-
@johnpoz said in VMware Workstation VMs Web Traffic Being Blocked:
@bpsdtzpw said in VMware Workstation VMs Web Traffic Being Blocked:
I meant smaller actual frames being used because there just isn't enough of a required resource
What? Look up frame and mtu ;)
If I were writing a VMM, it would be important to maintain reasonable performance within spec, including I/O bandwidth, latency, compute availability, etc.
To do this, the VMM would need to apportion baremetal resources to the VMs, both statically and dynamically, depending on available resources and how VMs (and other things running on the baremetal) are using them. So, to maintain both acceptable bandwidth and acceptable latency, the VMM might send a message to a VM's (virtual) ethernet driver, asking it to send smaller-than-permissible frames. It would still work to send frames as large as the MTU, but the VMM might punish violations of its request by delaying such frames, reducing resource quantums to the offending VM, etc.
This kind of resource management might explain the preponderance of smaller-than-MTU frames that puzzled you above.
BTW, I don't know WMware internals, but I do have experience designing and implementing VMMs.
-
I could believe this is a combination of things. Changing any one of them removes it but you happen to have hit the right combo!
VMWare not playing nicely with the NIC. USB/WIFI NICs never sit well with me but I've never tried that with VMWare&Windows.
Have you actually run any MTU tests yet? Like pinging with larger packets until it fails?
We see the replies coming back from external sites much larger when pfSense is routing but they are not over 1500B. Why is VMWare dropping them?
It seems like something is breaking PMTUD so one thing to do here would be to check for the presence of the ICMP packet-too-large messages when both Cisco and pfSense are routing.
Steve
-
@stephenw10 : Checking VMware logs might help. Presumably it can be configured to shout if it's dropping packets....
Aha!
<p>
Troubleshoot lost connectivity by capturing dropped packets through the pktcap-uw utility.A packet might be dropped at a point in the network stream for many reasons, for example, a firewall rule, filtering in an IOChain and DVfilter, VLAN mismatch, physical adapter malfunction, checksum failure, and so on. You can use the pktcap-uw utility to examine where packets are dropped and the reason for the drop.
</p>https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.networking.doc/GUID-84627D49-F449-4F77-B931-3C55E4A8ECA1.html
-
I'll happily perform another test. I don't actually know how to do the MTU tests such as the pinging with larger packets. I googled it earlier and messed with it for a few minutes but then stopped just because my attention got changed.
Do you have an example large ping test that you would like for me to run? If so, let me know what command and where (and if any captures) and I'll get that done ASAP.
I can do some basic watching of both scenarios looking for that ICMP packets too large messages you're talking about.
@bpsdtzpw said in VMware Workstation VMs Web Traffic Being Blocked:
pktcap-uw utility
I looked at this quick and this appears to be tied to vsphere esxi hosts vs my lowly VMware Workstation :)
-
@bpsdtzpw said in VMware Workstation VMs Web Traffic Being Blocked:
would be important to maintain reasonable performance within spec, including I/O bandwidth, latency
That wouldn't make for smaller or larger frames - or change the mtu of the network your connected too.. You understanding creating smaller packets would cause more work.. Trying to use a larger frame then your network was set to allow would again cause more work - And how would the VM software change the mtu of the switch port its connected too, etc..
-
@dfinjr said in VMware Workstation VMs Web Traffic Being Blocked:
I don't actually know how to do the MTU tests such as the pinging with larger packets.
not good to hear that the "calculation" with the USB NIC did not work..., but it is also a step forward and now there is a test USB NIC as well :)
although this doesn't mean anything, because the USB NIC also is a strange animal, especially on hypervisors.
(what's for sure is that I've never seen this before on VMware products , but surely this brings the problem, because the VB works)Steve is right about this:
- so the wifi has modified the MTU, which is a typical behavior, because of its own high MTU..., just think what happens when you want to get on the wire from wifi...
For the PING test, don't overthink it, just use the command with switches -f and -I
like:
ping google.com -f -I 1492
(do not test with 1492)
+++edit:
16.2.3 has been out for two days
one more thing, can you possibly run WS16 on Linux?
-
@bpsdtzpw said in VMware Workstation VMs Web Traffic Being Blocked:
If I were writing a VMM
Hi,
rather than writing a hypervisor
, I suggest you read the thread carefully from the very beginning, it's not a case of I/O and performance...BTW:
and it would cause chaos in the world of networking if the MTU was adapted to the load of a CPU@bPsdTZpW "This kind of resource management might explain the preponderance of smaller-than-MTU frames that puzzled you above."
you see that you misunderstand, because the problem is rather this MTU 1767 and/or 1753,
in case of ASA 1434 - let's face it none of them are good -
Good Morning everyone,
I have some things to get caught up with testing (obviously :)) and will do some testing I found these articles stumbling around with generic problem googling.
Good MTU article (might be elementary for some of you on the forum already but I found this explanation helpful):
https://www.imperva.com/blog/mtu-mss-explained/Then found this article from the methane forum that feels similar in issue possibly:
https://forum.netgate.com/topic/50886/mtu-and-mssIs it possible that the Cisco appliance is simply doing mss clamping and we need to set it?
I’ll still do that testing of course but found these articles and it has me thinking.
Thanks!
-
@dfinjr said in VMware Workstation VMs Web Traffic Being Blocked:
Is it possible that the Cisco appliance is simply doing mss clamping and we need to set it?
MSS clamping would be used on an external connection, like PPPoE or something that has a lowered mtu..
There is little reason that you should ever have to do mss clamping internally.. Since everything should be using the standard of 1500.
Even if your external internet connection could only use a specific lower than 1500 mtu... It wouldn't explain why you were seeing a 1753 mtu being used internally..
Your other devices are working fine when they use a correct mtu of 1500.. Why you continue to look to something to handle your VM using the wrong mtu makes no sense.
Why don't you open up a case with vmware on why your seeing the wrong mtu..
-
Yeah I wouldn't expect to need MSS clamping but if the Cisco is doing it that would explain why traffic can pass. And why it comes back with the unexpected size (1434B)
-
Since you say it works with virtual box, and none of your devices are having issues - and when you just test from the host it is using the correct mtu.
Have you thought of just uninstalling workstation and starting from scratch? Use a new box or wipe the host box as well..
I can not reproduce this problem on a clean install - everything works fine normal mtu.
You would think if this is some vmware generic sort of issue - that everyone would be screaming and there would be info all over the internet. Something specific to your setup it seems.
I just updated to 16.2.3 and still working as it should.. Out of curiosity, when you start your conversation with some website.. Look at your sniff on the SYN packet... What does it show you for the mss?
Then in the syn ack what do you see?
