Pfsense bloced after apply changes
-
Hello,
I have a problem of any change to the firewall (rules, vip, haproxy).Whenever I press on "apply changes" button the firewall hangs for 3/4 seconds.
In those seconds, the firewall is unreachable and even policies.
2.3.1-RELEASE-p5 (amd64)
built on Thu Jun 16 12:53:15 CDT 2016
FreeBSD 10.3-RELEASE-p3Do you have any advice?
-
The only way that happens is if you have a gateway down and you also have the firewall set to kill states on gateway failure.
System > Advanced, Miscellaneous tab, uncheck the box for state killing on gateway failure. That, or fix the gateway that must be showing as down under Status > Gateways. Either change the monitor IP address under System > Routing or disable gateway monitoring for the down gateway.