Stuck at loading kernel after upgrade to 2.6 (SOLVED)
-
Hello, I used the webgui to upgrade from 2.5.2 to 2.6. Now I am stuck at boot with this error:
Loading kernel...
+0x8+0x1c7bb8]
Loading configured modules...
loading required module 'opensolaris'
can't find '/etc/hostid'Any suggestions?
Update:
I turned verbose on:Loading kernel...
/boot/kernel/kernel text=0x1a5f37c data=0x140 data=0x1b63940 syms=[0x8+0x1c1370-+0x8+0x1c7bb8]
Loading configured modules...
can't find '/etc/hostid'
/boot/kernel/zfs.ko size 0x39adb0 at 0x3cee000
loading required module 'opensolaris'
/boot/kernel/opensolaris.ko size 0x9860 at 0x4089000
/boot/entropy size=0x1000
Start @ 0xffffffff803a1000 ...
EFI framebuffer information:
addr, size 0xde000000, 0x300000
dimensions 1024 x 768
stride 1024
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 -
I tried to boot to safe mode with no luck. I am also having trouble installing a fresh copy of 2.6.0 from USB. Seems like the same issue.
Anyone know how can I revert to 2.5.2? I can't seem to fine the media to download.
-
@mifronte
pfsense.org/download/
Make no choices
Click Download...and you'll land on a mirror site.
-
@steveits Thank you!
-
That ^. You'll end up here.
What are you installing to?
Can you try booting legacy mode?
can't find '/etc/hostid'is expected output and not the cause here.Steve
-
After several reboots, pfSense auto corrected itself and I am now up and running on 2.6.0.
I did not do anything other then modify by boot list in the BIOS to only list the internal hard drive (non UEFI listing).
-
It appeared I could not get the installer to run from the USB. I tried writing the 2.6.0 image using both Ethcher and Win32DiskImager and then setting the USB first in the boot priority.
I keep on booting into the normal pfSense auto boot menu and then pfSense would hang. Odd behaviors but I am glad 2.6.0 seems to be up and running.
This would have to be my first upgrade issue in years. Of course I forgot to remove my two packages (avahi and pfblockerng) prior to the webgui upgrade.
