DHCP lease screen not loading
-
@gertjan I have neither the forwarder nor resolver enabled (I use NextDNS daemon DNS). With the patch applied 'DHCP Leases' still loads for an eternity before finally returning a 504. Screenshots attached below. Perhaps there is something additional required for the patch to work which I am missing?
-
This post is deleted! -
UPDATE
It seems this issue exists when using DNS Resolver (Unbound) or when using an external DNS server like NextDNS CLI daemon. In my case I reverted the patch provided in this thread and switched back to using DNS Forwarder for local lookups with NextDNS for external lookups. This allowed the DHCP Leases page to load more consistently without 504s although randomly it still takes longer to load than before I upgraded to 2.5.2. Really hoping the root issue is found and remediated in the next release. Until then at least this is no longer a showstopper for me.For anyone using something like NextDNS wanting a reference configuration, I am using the configuration at the end of the thread here. Below are my DNS Forwarder (dnsmasq) settings in pfSense for reference (do not use strict binding if IPv6 is required):
-
Forgot to include that under General Settings I selected 'Use local DNS (127.0.0.1), ignore remote DNS Servers' in conjunction with the DNS Forwarder selections:
This is probably implied but, for transparency, DHCP DNS server is set to the LAN IP of pfSense which is running the NextDNS CLI daemon:
-
S SteveITS referenced this topic on
-
In CE 2.6.0, I get the 504 time out. I comment out this line in /etc/inc/system.inc, and it loads instantly even with a few thousand IPs leased:
$hostname = gethostbyaddr($item['ip']);Yes using a DNS forwarder because of many internal systems that we need hostnames mapped to. Everything is on one device with our gateway firewall functions, dhcp, dns forwarding.
In the status screen at /status_dhcp_leases.php, the "Hostname" column seems to be indicating something against most leases, corresponding to their device's internal name (computer name, etc.).
Could someone kindly explain why a DNS lookup would even be happening for DHCP leases? Aren't all the devices internal?
-
@ssp said in DHCP lease screen not loading:
Could someone kindly explain why a DNS lookup would even be happening for DHCP leases? Aren't all the devices internal?
These are your leases : /var/dhcpd/var/db/dhcpd.leases
As you can see, the client host name is present. This is the name that the device gave to pfSense, and isn't necessarily the name pfSense gave it. That is, the name you gave it when you created a static DHCP lease.gethostbyaddr() is used to get the registered DNS host name using the IP, found in the lease.
The (your) issue is : the DNS isn't working.
What gethostbyaddr() does : it uses /etc/resolv.conf to get the address of the 'nameserver', normally 127.0.0.1. Then it connects to 127.0.0.1 port 53 and does the DNS request.So, does your DNS forwarder listen on 127.0.0.1 - or whatever IP you found in /etc/resolv.conf ?
-
@ssp As far as i observed PfblockerNG python mode cause issue for dhcp lease page loading please test if you use python mode in PfblockerNG devel version.
Without Python mode it works fine as expected. -
@gertjan Thank you for explaining that!
I use DNS Forwarder in pfSense. It listens on LAN port 53. I have the "Do not forward private reverse lookups" checked. I have a few host overrides which map to a few of our internal hosts. That's it. System - General Setup - DNS Servers list the OpenDNS servers that we use (these are reflected in /etc/resolv.conf). I suppose those would not respond to reverse IP lookups anyway.
Not sure what I would do differently. The getaddrbyhost is not a functionality I would need. Have not changed settings for years but DHCP leases page stopped loading last few CE versions.
-
@all :
See here :
https://www.php.net/manual/fr/function.gethostbyaddr.php
If you create a file called dns.php here /usr/local/www/
<?php $hostname = gethostbyaddr($_SERVER['REMOTE_ADDR']); echo $hostname; ?>you will be able to access pfSense, login first, and then you visit
https:/your-pfsense.tld/dns.phpThis should shows the fully qualified host name on the page, like :
Btw : the function gethostbyaddr()isn't a PHP thing. It's a core Winows/Linux/MacOS/FreeBSD/OpenBSD system function and should work.
There are exceptions, but read : https://www.php.net/manual/fr/function.gethostbyaddr.php again : it won't work if DNS on the device ( pfSense ) is 'broken'. This function is capable of returning 'nothing' about a long wait time. The GUI ( web server, that uses PHP to execute the function ) seems to hang, or even time out with an "503".
When you visit the command line, option 8, and type :
host 192.168.1.6
where 192.168.1.6 is the IP of your the device you use the visit pfSense :[2.6.0-RELEASE][admin@pfsense.yourpfsense.tld]/usr/local/www: host 192.168.1.6 6.1.168.192.in-addr.arpa domain name pointer Gauche2.yourpfsense.tld.@ahsunh said in DHCP lease screen not loading:
Without Python mode it works fine as expected
This mode asks for something special :
which means you have to remove the check from :
which means that, when your LAN devices ask for a lease, their known hosts names will not get written in the "local DNS device list".
There is a very old issue with this option. It works fine on small network, by de select it when you have many DHCP client devices on your network. See the 'thousands' other forum posts about the 'why' part.When you ask for the reverse of an IP that isn't known in the local DNS cache/lost :
[2.6.0-RELEASE][admin@pfsense.yourpfsense.tld]/usr/local/www: host 192.168.1.100 Host 100.1.168.192.in-addr.arpa not found: 3(NXDOMAIN)This NXDOMAIN should be given immediately, without any delay.
Btw :
Make an entry for every device that you want to know by host name and IP under
Services > DHCP Server > LAN > DHCP Static Mappings for this Interfaceand keep this option selected :
( be default, it is ).
@ssp said in DHCP lease screen not loading:
I use DNS Forwarder in pfSense. It listens on LAN port 53.
and 127.0.0.1 I hope ^^
@ssp said in DHCP lease screen not loading:
(these are reflected in /etc/resolv.conf)
What's in it ?
@ssp said in DHCP lease screen not loading:
I suppose those would not respond to reverse IP lookups anyway.
I hope not.
If you would ask : who is 192.168.1.1 to them they ( upstream resolver ) would know that your system has a huge issue. As it boils down to asking to a stranger " can you tell me what my name is ? ".
It makes no sense to reverse resolve a RFC1918 ( local IPs ) using an upstream resolver.@ssp said in DHCP lease screen not loading:
Could someone kindly explain why a DNS lookup would even be happening for DHCP leases? Aren't all the devices internal?
When a device asks for a lease, it will communicate some confirmation about itself.
One of it is the name your device thinks it's called.
It could be an empty ( non ) text.
Or something like "android-d90b45910562a5e0" (for those who never bothered setting a 'name' for their device).
Or iPhone-X-Gertjan if you've set one.But, you can use a "static MAC DHCP" entry, and name the device differently. This way, whatever the devices was telling about it's host name isn't use for DNS. It's you, the admin, that decides how the device is called in the network.
take note that for some device you can't set the hos name anyway. For example, I've multiple credit card terminal here, and their host name is hard coded.
So I created a static MAC DHCP lease : "TPE-Restaurant" "TPE-Bar and "TPE-Hotel"0What you also need to know :
The DNS resolver doesn't know about DHCP, doesn't know what DHCP is.
On the other hand, the DHCP server maintains and hands out DHCP leases : it knows what device with what MAC address use what I for which duration.So, some "glue code" was written that converts the local leases, stored here /var/dhcpd/var/db/dhcpd.leases (see the file for yourself ) into another file that the local dns resolver (or forwarder) understands. For the resolver, that will be /var/unbound/dhcpleases_entries.conf
For every new incoming lease handed out by the DHCP server, the "glue code" is started, leases are converted, and the local dns (resolver or forwarder) are signalled : "hey, there is new info available, please re read the files on disk as I changed one of them".
For the resolver, this boils down : restarting it.
DNSMasq : the forwarder, I don't now.That's why I prefer to stop this "restating"as during the restart of the resolver, DNS is temporally unavailable to the entire network, pfsense and all connected devices on all LANs.
It's not an issue if you have one or two devices that are wired up to pfSense, and ask a new lease every day or so.
But if you have many devices, and many radio based ( known as wWifi ) devices, the DHCP requests are really accelerating.
Having DNS restarted ( again : the resolver, the forwarder, I don't now) this becomes noticeable.
And then came pfBlockerNG-devel. People start to to add huge lists of DNSBL's. These lists have to be re read also by the resolver on every (re) start up. restarting of the resolvers becomes slooooow.
Slow, and very frequent means : DNS is often ko.
And that's not good at all, connected people really start to notice this. -
@Gertjan Hello dear please let us know the most simplest solution for handling this issue of DHCP lease page status.
and yes you are right issue comes on WIFI channel where huge blocks of IP are available.
working with DNS resolver not forwarder. -
@ahsunh
Start by un-checking :
This will stop unbound from restarting far less frequent.
You can check this for yourself : count the word "start" at the Status > System Logs >System > DNS Resolver page :
Yours must be restarting a lot, like many times per hour.
-
@gertjan Hello dear
start seems 4 times only not much repeated and dhcp resgistration option is already unchecked.
-
SG-2100 running version 22.01-RELEASE (arm64). Been rock solid, no issues loading anything. I install pfBlockerNG-devel 3.1.0_4 and now DHCP leases page won't load. Removed the pfBlocker package and it still won't load.
-
@eazyxl said in DHCP lease screen not loading:
I install pfBlockerNG-devel 3.1.0_4 and now DHCP leases page won't load. Removed the pfBlocker package and it still won't load.
So, "pfBlockerNG-devel 3.1.0_4" wasn't the issue.
The "DHCP lease screen" screen uses the local DNS to resolve host names to IP, or the other way around.
That is, a PHP function is used to resolve a host name to an IP. This function winds up calling 127.0.0.1 on port 53 : that's where unbound is listening for DNS jobs.
For example, : if no one is listing ( unbound doesn't listen on 127.0.0.1), this function will .... hang .... and bail out after the PHP abort time, a minute or even more.On a default pfSense, unbound will listen on :
From IP to a host name :
[22.01-RELEASE][root@pfSense.my-pfsense.net]/root: dig @127.0.0.1 -x 192.168.1.250 +short APP1.mypfsense.net.The other way around :
[22.01-RELEASE][root@pfSense.my-pfsense.net]/root: dig @127.0.0.1 APP1.my-pfsense.net. +short 192.168.1.250Conclusion : my pfSense DNS works fine.
I'm using both 2.6.0, or 22.01.Btw : If you have "DHCP Registration" de activated in the unbound settings (for very known reasons), there will be no DNS available coming from the DHCP leases.
Not an issue, unbound will reply immediately with 'dono', and the Status DHCP Leases page still shows up just fine.Tell us about your (DNS) settings, and we'll tell you what's wrong ;)
-
@gertjan
Actually this is for anyone else ripping their hair out over this issue.
DHCP LEASES PAGE WILL NOT LOAD - PFSense 2.52I had changed my DNS list to make my provider the first DNS in the General tab.
I changed that back to 8.8.8.8 for the moment.
I also noticed that I had it set to use local DNS fall back to external.
I changed that to ignore local DNS use only external.
BOOM
My dhcp leases page loads again and now nice and fast.
I have tried working with the DNS forward and DNS resolver in the past and it has always led to problems.
May be something I am doing wrong but this config I explained above worked instantly. -
@zarteg said in DHCP lease screen not loading:
I changed that back to 8.8.8.8 for the moment.
You think that "8.8.8.8" is aware of the devices you have on your LAN ? Or anything related to your leases ?
Even if you 'told' them, they do not want to know.
They might as well decide not to answer ..... ;)@zarteg said in DHCP lease screen not loading:
I changed that to ignore local DNS use only external.
Again, who is 'external' ?
External doesn't know anything about "local". -
@gertjan
<snip> You think that "8.8.8.8" is aware of the devices you have on your LAN ?NO I don't - Dirty DNS is always a possibility though huh ?
Just mentioned ANY AND ALL changes I did.
I suspect it was looking for DNS internal and I have all of it off.Also using PFBlocker just for the record but oddly nothing has changed in my setup.
PFBlocker update change my DNS settings ?
Dunno its like a magical Windozer type thing.All I know is I don't use the DNS anyways, I have PFS (2.52) running PFblocker and 12 VLANs, My pages are all loading properly and lightning fast again.
If you want to run DNS or Forwarding, I can't speak to that.
Less services the better as far as I am concerned. -
@gertjan I realize that.
I thought this thread was about my DHCP status page won't load?
Told you how I fixed it with all details included.
Perhaps you are lonely and are looking for conversation?
Sorry no time for that.
I wasn't here to teach a class on DNS. Simple to fix the DHCP leases page not loading.
Microsoft answers take all day to explain and mean very little in the end
Feel like mostly M$ employee type answers here.KISS
(Keep It Simple Sally) -
For what it's worth, I had the same issue and this fixed it for me:
- pfSense General Setup page was configured to use NextDNS
- I changed it to use my local AD Domain Controllers instead.
- Suddenly DHCP Leases loads instantly.
-
Does anyone have idea of whats happening here? I have the same issue, for months now.
- No 8.8.8.8 or other insane settings.
- No pfBlocker
- No DHCP registration on DNS
- No crazy rules that blocks 53/tcp.
- DNS pointing to 127.0.0.1 and those aquired from WAN.
And I still don't have the DHCP leases page working:
Oct 21 16:06:57 firewall nginx: 2022/10/21 16:06:57 [error] 67579#100560: *267 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 172.16.144.114, server: , request: "GET /status_dhcp_leases.php HTTP/2.0", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "172.21.1.1", referrer: "https://172.21.1.1/index.php"
Thanks.
