Incorrect bandwidth monitor values
-
@hvr-lust said in Incorrect bandwidth monitor values:
PPROMISC
Hmm, that's.... interesting!
Is it in a bridge by any chance? Or are any of those interfaces in a bridge?
I wouldn't normally expect to see a TAP mode client in a bridge in that sort of setup but...
Steve
-
This post is deleted! -
Mmm, it seems the interface is being used in some unexpected way to cause it to be flagged like that. This seems very likely to be related.
Steve
-
And the actual pfctl output shows that data on the wrong interfaces too?
-
It would be good to test a 2.7 snapshot if you can. There have been a lot of pf changes there recently. There's a good chance it will at least behave differently.
-
This post is deleted! -
Ok so to be clear you don't have any bridge interfaces?
No TAP mode openvpn clients?
Did your config include the RRD data? Definitely worth testing without it if so.
Steve
-
This post is deleted! -
This post is deleted! -
Is that a config from 2.4.5?
SSH keys were not included in the config until 2.6. You can probably remove that section from the config to allow it restore.
Steve
-
This post is deleted!
