Logs show Scheduler Rule reference only and not Scheduler Description

[4o4rh]

When creating a firewall rule, the logs will show the description of the rule if one exists.

e.g. VLAN22VOIP to HTTP (1654069992)

however, if the rule has a schedule applied, the log shows the scheduler rule as s:5d66db51b3fbc (1653986728) and does not show the Scheduled Rule's description.

astethics i know, but makes the log very confusing when it only has scheduled references.

[jimp]

What snapshot are you running? There was a bug like that weeks ago but it been fixed for some time now.

[jimp]

I can't reproduce this on a current snapshot, I see the expected label:

🔒 Log in to view

[4o4rh]

@jimp i am on 22.01-RELEASE, so i will hang on for the actual release of 22.05 and hopefully it will resolve.

I also have an issue when the rule deactivates (or activates if you like).

I have a rule that passes voip ports and addresss for my providers from the hours 06:00 - 23:59. This worked fine under 2.45 -> 2.5.2

Since i upgraded to 2.60 and then to 22.01
If i reboot pfsense, or i don't enable the schedule the 3 providers register succesfully.
I can reset the voip devices multiple times and the 3 providers will register.

When the schedule kicks in, the http and the voip services are disconnected.
at 06:00 when the schedule kicks in again, the http works and one of the providers register, but 2 other fail to register.

If i reset the device, the 2 still don't register. But if i reboot so the schedule has not blocked the rules, then all services register

[jimp]

You are posting in the category for 22.05 development snapshots, which is intended to be for reporting issues found while running a 22.05 development snapshot.

The log issue is definitely fixed on 22.05, not sure about the other problem you mentioned but if you want to raise that issue I suggest you start a fresh thread in a more appropriate category and ask about it there.