NTP unreachable/pending (RESOLVED)

mcury

Just noticed that my NTP is not working, any tips?
pfsense version 22.05

ntpdate -q 200.160.0.8
server 200.160.0.8, stratum 2, offset -0.435759, delay 0.04805
 2 Jul 15:12:46 ntpdate[69100]: adjust time server 200.160.0.8 offset -0.435759 sec

ntpdate -q 200.189.40.8
server 200.189.40.8, stratum 2, offset -0.434104, delay 0.08768
 2 Jul 15:13:09 ntpdate[95157]: adjust time server 200.189.40.8 offset -0.434104 sec

ntpdate -q 200.192.232.8
server 200.192.232.8, stratum 2, offset -0.434944, delay 0.06168
 2 Jul 15:13:16 ntpdate[95245]: adjust time server 200.192.232.8 offset -0.434944 sec

johnpoz

@mcury how did you set these up?

Those are overlapping networks - pfsense would not even allow you to create those.

example

mcury

@johnpoz hmmmmm, I know what that is.
It is a ipsec mobile road warrior in which I have two pools of IPs using this "hack":

https://forum.netgate.com/topic/172519/state-of-the-union-in-pfsense-land-opinions/32?_=1656797435331
https://redmine.pfsense.org/issues/13227

Edit: I fixed it

But the NTP problem persists..

mcury

I fixed by selecting one interface for NTP to listen on (LAN).
And now its working..

Do you know if I should select localhost interface too?

johnpoz

@mcury I don't have mine listening on localhost.. Just on the lan interfaces I wan to provide ntp services on.

mcury

@johnpoz Ok then, thanks once again johnpoz