SG-1100 PCIe WIFI (mikrotik)
-
hello,
I have been following the older 1100 pcie thread but I thought of starting a new one as things have changed sense then a lot.
Im trying to add a 2.4G PCIE (mikrotik) to the 1100 and boot stops at pci0. I have moved the 2 usb/pcie jumpers.
This PCIE wifi card works great with pfsense on a APU2C4.
TIM-1.0 WTMI-devel-18.12.1-1a13f2f WTMI: system early-init SVC REV: 5, CPU VDD voltage: 1.213V NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL1: Built : 10:16:46, Oct 13 2021 NOTICE: BL1: Booting BL2 NOTICE: BL2: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL2: Built : 10:16:50, Oct 13 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL31: Built : 10 U-Boot 2018.03-devel-18.12.3-gc9aa92c-dirty (Oct 13 2021 - 10:14:54 -0300) Model: Netgate 1100 CPU 1200 [MHz] L2 800 [MHz] TClock 200 [MHz] DDR 750 [MHz] DRAM: 1 GiB Comphy chip #0: Comphy-0: USB3 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link up MMC: sdhci@d0000: 0, sdhci@d8000: 1 Loading Environment from SPI Flash... SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB, total 4 MiB OK Model: Netgate 1100 Net: eth0: neta@30000 [PRIME] Hit any key to stop autoboot: 0 | __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| ╔════ Welcome to Netgate pfSense Plus ════╗ __________________________ ║ ║ / ___\ ║ 1. Boot Multi user [Enter] ║ | /` ║ 2. Boot Single user ║ | / :-| ║ 3. Escape to loader prompt ║ | _________ ___/ /_ | ║ 4. Reboot ║ | /` ____ / /__ ___/ | ║ 5. Cons: Serial ║ | / / / / / / | ║ ║ | / /___/ / / / | ║ Options: ║ | / ______/ / / _ | ║ 6. Kernel: default/kernel (1 of 2) ║ |/ / / / _| |_ | ║ 7. Boot Options ║ / /___/ |_ _| | ║ 8. Boot Environments ║ / |_| | ║ ║ /_________________________/ ╚═════════════════════════════════════════╝ \ Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x2a8 text=0x9a8fac text=0x25bee4 data=0x12ea238 data=0x0+0x2d58fe syms=[0x8+0x183288+0x8+0x1492f3] Loading configured modules... /boot/kernel/opensolaris.ko text=0x1217 text=0xc88 data=0x448+0x6830 syms=[0x8+0xfc0+0x8+0x88e] /boot/kernel/zfs.ko text=0x8a548 text=0x1313f8 data=0x18400+0x909a0 syms=[0x8+0x26670+0x8+0x1fab0] can't find '/etc/hostid' can't find '/boot/entropy' Using DTB provided by EFI at 0x8000000. ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.3-STABLE plus-RELENG_22_05-n202700-3ddaea61055 pfSense arm64 FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT: init without driver. real memory = 1073680384 (1023 MB) avail memory = 1003532288 (957 MB) Starting CPU 1 (1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000214d60, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff000000214e10, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000214ec0, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000214f70, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000215020, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff0000002150d0, 0) error 1 random: entropy device external interface WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. MAP 8000000 mode 2 pages 5 MAP 3e61f000 mode 2 pages 1 MAP 3ffc6000 mode 2 pages 1 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0. WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 simplebus1: <Flattened device tree simple bus> on simplebus0 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 27 on simplebus1 gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on simple_mfd0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1 gpiobus1: <OFW GPIO bus> on gpio1 gpioregulator0: <GPIO controlled regulator> on ofwbus0 generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu1: <Open Firmware CPU> on cpulist0 pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0 spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1 iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on simplebus1 uart0: console (115200,n,8,1) gpioc0: <GPIO controller> on gpio0 syscon_generic_dev0: <syscon> mem 0x14000-0x1405f on simplebus1 gpioc1: <GPIO controller> on gpio1 mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1 mvneta0: version is 10 mvneta0: Ethernet address: f0:ad:4e:23:33:c3 mdio0: <MDIO> on mvneta0 e6000sw0: <Marvell 88E6341> on mdio0 e6000sw0: multi-chip addressing mode (0x1) e6000sw0: CPU port at 0 e6000sw0: fixed port at 0 e6000sw0: PHY at port 1 miibus0: <MII bus> on e6000sw0 e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus1: <MII bus> on e6000sw0 e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus2: <MII bus> on e6000sw0 e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: switch is ready. etherswitch0: <Switch controller> on e6000sw0 xhci0: <Marvell Integrated USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5ffff irq 17 on simplebus1 usbus1: EHCI version 1.0 usbus1 on ehci0 sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1 mmc0: <MMC/SD bus> on sdhci_xenon0 sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 25 on simplebus1 mmc1: <MMC/SD bus> on sdhci_xenon1 ahci0: <AHCI SATA controller> mem 0xe0000-0xe1fff irq 26 on simplebus1 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0 pcib0: link up pci0: <PCI bus> on pcib0Boot stops here...
-
You shouldn't need to move the jumpers unless you're using a USB wifi NIC, which you're not.
Try booting in verbose mode to get more console output.
It may simply be uncompatible at a level nothing can be done though. What exactly is that NIC? What chipset? How does it appear in the APU?
Steve
-
S stephenw10 referenced this topic on
-
@stephenw10 I switched the jumpers back and booted with -v.
pcie is a: R11e-2HPnD - Atherosath1@pci0:5:0:0: class=0x028000 card=0xd01619b6 chip=0x0033168c rev=0x01 hdr=0x00 vendor = 'Qualcomm Atheros' device = 'AR958x 802.11abgn Wireless Network Adapter' class = networkExample from a working pfsense (APU2) install:
ath1_wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: OPT5_WLAN2G ether 74:4d:28:36:bc:8c inet6 fe80::764d:28ff:fe36:bc8c%ath1_wlan0 prefixlen 64 scopeid 0x9 inet 192.168.66.26 netmask 0xffffff00 broadcast 192.168.66.255 groups: wlan ssid LittleW channel 9 (2452 MHz 11g ht/20) bssid 00:2a:10:cf:3b:10 regdomain FCC country US anywhere ecm authmode WPA2/802.11i -wps -tsn privacy ON deftxkey UNDEF AES-CCM 2:128-bit powersavemode OFF powersavesleep 100 txpower 6 txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 11ng ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 roam:11b rssi 7dBm rate 1 Mb/s roam:11g rssi 7dBm rate 5 Mb/s roam:11ng rssi 7dBm MCS 1 -pureg protmode OFF ht htcompat ampdu ampdulimit 64k ampdudensity 8 amsdu shortgi htprotmode RTSCTS -puren -smps -rifs stbc ldpc -uapsd -vht -vht40 -vht80 -vht160 -vht80p80 wme burst -dwds roaming MANUAL bintval 102 AC_BE cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm ack cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm AC_VI cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm ack cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm AC_VO cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm ack cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm parent interface: ath1 media: IEEE 802.11 Wireless Ethernet MCS mode 11ng status: associated nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>On sg-1100:
Boot goes into a loop with the output of the last couple of lines.OK boot -v Loading kernel... /boot/kernel/kernel text=0x2a8 text=0x9a8fac text=0x25bee4 data=0x12ea238 data=0x0+0x2d58fe syms=[0x8+0x183288+0x8+0x1492f3] Loading configured modules... /boot/kernel/opensolaris.ko text=0x1217 text=0xc88 data=0x448+0x6830 syms=[0x8+0xfc0+0x8+0x88e] /boot/kernel/zfs.ko text=0x8a548 text=0x1313f8 data=0x18400+0x909a0 syms=[0x8+0x26670+0x8+0x1fab0] can't find '/etc/hostid' can't find '/boot/entropy' Using DTB provided by EFI at 0x8000000. ---<<BOOT>>--- Type Physical Virtual #Pages Attr ConventionalMemory 000000000000 0 00008000 WB RuntimeServicesData 000008000000 8000000 00000005 WB RUNTIME ConventionalMemory 000008005000 0 0002e57d WB LoaderData 000036582000 36582000 00000001 WB LoaderData 000036583000 36583000 00004000 WB LoaderData 00003a583000 3a583000 00004000 WB LoaderCode 00003e583000 3e583000 0000009c WB RuntimeServicesData 00003e61f000 3e61f000 00000001 WB RUNTIME Reserved 00003e620000 3e620000 00000001 WB Reserved 00003e621000 3e621000 00000001 WB Reserved 00003e622000 3e622000 00000001 WB Reserved 00003e623000 3e623000 00000001 WB Reserved 00003e624000 3e624000 00000001 WB Reserved 00003e625000 3e625000 00000001 WB Reserved 00003e626000 3e626000 00000001 WB Reserved 00003e627000 3e627000 00000001 WB Reserved 00003e628000 3e628000 00000001 WB Reserved 00003e629000 3e629000 00000001 WB Reserved 00003e62a000 3e62a000 00000001 WB Reserved 00003e62b000 3e62b000 00000001 WB Reserved 00003e62c000 3e62c000 00000001 WB LoaderData 00003e62d000 3e62d000 00001999 WB RuntimeServicesCode 00003ffc6000 3ffc6000 00000001 WB RUNTIME LoaderData 00003ffc7000 3e62d000 00000039 WB Physical memory chunk(s): 0x00001000 - 0x3e61ffff, 998 MB ( 255519 pages) 0x3e62d000 - 0x3ffc5fff, 25 MB ( 6553 pages) 0x3ffc7000 - 0x3fffffff, 0 MB ( 57 pages) Excluded memory regions: 0x0401c000 - 0x0403ffff, 0 MB ( 36 pages) NoAlloc 0x08000000 - 0x08004fff, 0 MB ( 5 pages) NoAlloc 0x36600000 - 0x38fbafff, 41 MB ( 10683 pages) NoAlloc 0x3e61f000 - 0x3e62cfff, 0 MB ( 14 pages) NoAlloc 0x3ffc6000 - 0x3ffc6fff, 0 MB ( 1 pages) NoAlloc Found 2 CPUs in the device tree Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.3-STABLE plus-RELENG_22_05-n202700-3ddaea61055 pfSense arm64 FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT: init without driver. Preloaded elf kernel "/boot/kernel/kernel" at 0xffff00000278e000. Preloaded elf module "/boot/kernel/opensolaris.ko" at 0xffff0000027973b0. Preloaded elf module "/boot/kernel/zfs.ko" at 0xffff000002797ad0. real memory = 1073680384 (1023 MB) Physical memory chunk(s): 0x00000000001000 - 0x0000000401bfff, 67219456 bytes (16411 pages) 0x00000004040000 - 0x00000007ffffff, 66846720 bytes (16320 pages) 0x00000008005000 - 0x00000034d8dfff, 752390144 bytes (183689 pages) 0x00000038fbb000 - 0x0000003e61efff, 90587136 bytes (22116 pages) 0x0000003e62d000 - 0x0000003ffc5fff, 26841088 bytes (6553 pages) 0x0000003ffc7000 - 0x0000003fffffff, 233472 bytes (57 pages) avail memory = 1003532288 (957 MB) Starting CPU 1 (1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs random: no preloaded entropy cache arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. VIMAGE (virtualized network stack) enabled hostuuid: using 00000000-0000-0000-0000-000000000000 ULE: setup cpu 0 ULE: setup cpu 1 firmware: 'rtwn-rtl8188eefw' version 111: 11216 bytes loaded at 0xffff000001d0da40 firmware: 'rtwn-rtl8188eufw' version 111: 13904 bytes loaded at 0xffff000001d106c0 firmware: 'rtwn-rtl8192cfwE' version 111: 14818 bytes loaded at 0xffff000001d13dc0 firmware: 'rtwn-rtl8192cfwE_B' version 111: 16332 bytes loaded at 0xffff000001d17858 firmware: 'rtwn-rtl8192cfwT' version 111: 16126 bytes loaded at 0xffff000001d1b8d8 firmware: 'rtwn-rtl8192cfwU' version 111: 16126 bytes loaded at 0xffff000001d1f888 firmware: 'rtwn-rtl8192eufw' version 111: 31818 bytes loaded at 0xffff000001d23838 firmware: 'rtwn-rtl8812aufw' version 111: 32060 bytes loaded at 0xffff000001d2b538 firmware: 'rtwn-rtl8821aufw' version 111: 27804 bytes loaded at 0xffff000001d33328 firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffff000001a669d0 wlan: mac acl policy registered firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffff000001ab9078 firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffff000001b280f8 wlan: <802.11 Link Layer> firmware: 'iwn6000g2bfw' version 0: 679436 bytes loaded at 0xffff000001bcd758 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffff000001c73618 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000214d60, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff000000214e10, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000214ec0, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000214f70, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000215020, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff0000002150d0, 0) error 1 firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xffff000001d4b0c0 firmware: 'runfw' version 0: 8192 bytes loaded at 0xffff000001d692a8 firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffff000001ce9cc0 firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffff000001d00fa0 firmware: 'iwm3160fw' version 0: 918268 bytes loaded at 0xffff000000d500e0 firmware: 'iwm3168fw' version 0: 1028032 bytes loaded at 0xffff000000e30490 firmware: 'iwm7260fw' version 0: 1049340 bytes loaded at 0xffff000000f2b500 firmware: 'iwm7265fw' version 0: 1180412 bytes loaded at 0xffff00000102b8b0 firmware: 'iwm7265Dfw' version 0: 1383604 bytes loaded at 0xffff00000114bc60 firmware: 'iwm8000Cfw' version 0: 2351636 bytes loaded at 0xffff00000129d9c8 firmware: 'iwm8265fw' version 0: 1811984 bytes loaded at 0xffff0000014dbc90 firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffff000001696350 firmware: 'iwn100fw' version 0: 337572 bytes loaded at 0xffff0000016e8a70 firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffff000001d04800 firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffff000001d068b0 firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffff000001d08960 firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffff000001d0aa10 firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffff000001d7bd20 firmware: 'iwn105fw' version 0: 689680 bytes loaded at 0xffff00000173b1c8 firmware: 'iwn135fw' version 0: 701228 bytes loaded at 0xffff0000017e3888 firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffff00000188ec68 firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffff000001938b60 random: entropy device external interface firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffff0000019e5750 firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffff000001a13648 WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. MAP 8000000 mode 2 pages 5 MAP 3e61f000 mode 2 pages 1 MAP 3ffc6000 mode 2 pages 1 null: <full device, null device, zero device> openfirm: <Open Firmware control device> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0. WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [ath_hal] loaded nfslock: pseudo-device crypto: <crypto core> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0 mem: <memory> ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 simplebus1: <Flattened device tree simple bus> on simplebus0 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version 0.2 compatible gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 27 on simplebus1 gic0: SPIs: 224, IDs: 65535 gic0: Start searching for Re-Distributor gic0: CPU0 Re-Distributor has been found gic0: CPU0 Re-Distributor woke up gic0: CPU0 enabled CPU interface via system registers gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on simple_mfd0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1 gpiobus1: <OFW GPIO bus> on gpio1 gpioregulator0: <GPIO controlled regulator> on ofwbus0 generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 efirtc0: cannot read EFI realtime clock, error 5 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu0: missing 'clock-frequency' property arm64_cpu0: register <0> cpu1: <Open Firmware CPU> on cpulist0 cpu1: missing 'clock-frequency' property arm64_cpu1: register <1> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0 spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1 iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 simplebus1: <i2c@11080> mem 0x11080-0x110a3 irq 8 disabled compat marvell,armada-3700-i2c (no driver attached) uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on simplebus1 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD simplebus1: <serial@12200> mem 0x12200-0x1222f irq 12,13 disabled compat marvell,armada-3700-uart-ext (no driver attached) simplebus1: <nb-periph-clk@13000> mem 0x13000-0x130ff compat marvell,armada-3700-periph-clock-nb (no driver attached) simplebus1: <sb-periph-clk@18000> mem 0x18000-0x180ff compat marvell,armada-3700-periph-clock-sb (no driver attached) simplebus1: <tbg@13200> mem 0x13200-0x132ff compat marvell,armada-3700-tbg-clock (no driver attached) simplebus1: <reset@13840> mem 0x13840-0x1384f compat marvell,armada-3700-reset (no driver attached) gpioc0: <GPIO controller> on gpio0 simple_mfd0: <xtal-clk> mem 0x13800-0x138ff,0x13c00-0x13c1f compat marvell,armada-3700-xtal-clock (no driver attached) syscon_generic_dev0: <syscon> mem 0x14000-0x1405f on simplebus1 gpioc1: <GPIO controller> on gpio1 mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1 mvneta0: version is 10 mvneta0: bpf attached mvneta0: Ethernet address: f0:ad:4e:23:33:c3 mdio0: <MDIO> on mvneta0 e6000sw0: Found switch_node: 0x1340 e6000sw0: Found switch_node: 0x1340 e6000sw0: <Marvell 88E6341> on mdio0 e6000sw0: multi-chip addressing mode (0x1) e6000sw0: CPU port at 0 e6000sw0: fixed port at 0 e6000sw0: PHY at port 1 miibus0: <MII bus> on e6000sw0 e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0 e1000phy0: OUI 0x000ac2, model 0x0000, rev. 1 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus1: <MII bus> on e6000sw0 e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1 e1000phy1: OUI 0x000ac2, model 0x0000, rev. 1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus2: <MII bus> on e6000sw0 e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2 e1000phy2: OUI 0x000ac2, model 0x0000, rev. 1 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: switch is ready. etherswitch0: <Switch controller> on e6000sw0 simplebus1: <mdio@32004> mem 0x32004-0x32007 compat marvell,orion-mdio (no driver attached) simplebus1: <ethernet@40000> mem 0x40000-0x43fff irq 15 disabled compat marvell,armada-3700-neta (no driver attached) xhci0: <Marvell Integrated USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 xhci0: usbpf: Attached ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5ffff irq 17 on simplebus1 ehci0: 5.24 GL USB-2 workaround enabled usbus1: EHCI version 1.0 usbus1 on ehci0 ehci0: usbpf: Attached simplebus1: <xor@60900> mem 0x60900-0x609ff,0x60b00-0x60bff compat marvell,armada-3700-xor (no driver attached) simplebus1: <crypto@90000> mem 0x90000-0xaffff irq 18,19,20,21,22,23 compat inside-secure,safexcel-eip97 (no driver attached) sdhci_xenon0: vqmmc-supply regulator found sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1 sdhci_xenon0: Non-removable media sdhci_xenon0: Non-removable media sdhci_xenon0-slot0: 400MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: BACD DMA non-removable sdhci_xenon0-slot0: ============== REGISTER DUMP ============== sdhci_xenon0-slot0: Sys addr: 0x00000000 | Version: 0x00000002 sdhci_xenon0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_xenon0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_xenon0-slot0: Present: 0x01f00000 | Host ctl: 0x00000000 sdhci_xenon0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_xenon0-slot0: Wake-up: 0x00000000 | Clock: 0x0000ffc7 sdhci_xenon0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_xenon0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 sdhci_xenon0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_xenon0-slot0: Caps: 0x25e80099 | Caps2: 0x0000af77 sdhci_xenon0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 sdhci_xenon0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_xenon0-slot0: =========================================== sdhci_xenon0-slot0: Card inserted mmc0: <MMC/SD bus> on sdhci_xenon0 sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 25 on simplebus1 sdhci_xenon1: Non-removable media sdhci_xenon1: Non-removable media sdhci_xenon1-slot0: 400MHz HS 8bits VDD: 3.3V VCCQ: 3.3V DRV: BACD DMA non-removable sdhci_xenon1-slot0: ============== REGISTER DUMP ============== sdhci_xenon1-slot0: Sys addr: 0x3c6d3200 | Version: 0x00000002 sdhci_xenon1-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000 sdhci_xenon1-slot0: Argument: 0x0035203d | Trn mode: 0x00000013 sdhci_xenon1-slot0: Present: 0x01f20000 | Host ctl: 0x00000024 sdhci_xenon1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_xenon1-slot0: Wake-up: 0x00000000 | Clock: 0x00000407 sdhci_xenon1-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_xenon1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 sdhci_xenon1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_xenon1-slot0: Caps: 0x25ec0099 | Caps2: 0x0000af77 sdhci_xenon1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 sdhci_xenon1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_xenon1-slot0: =========================================== sdhci_xenon1-slot0: Card inserted mmc1: <MMC/SD bus> on sdhci_xenon1 ahci0: <AHCI SATA controller> mem 0xe0000-0xe1fff irq 26 on simplebus1 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahci0: Caps: NCQ SNTF AL 6Gbps PM FBS PMD SSC PSC 32cmd eSATA 1ports ahci0: Caps2: ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: Caps: CPD ESP FBSCP pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0 pcib0: link up pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x3c pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x3c pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x2c pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x2c pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x3c pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x3c pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x4 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0x34 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0 pcib0: a37x0_pcie_check_pio_status: Posted PIO Response Status: CA, 0xe00 @ 0xfc -
Mmm, there's a good chance it simply won't work. The only card I know will work there is the WLE200NX. That's what was used when developing the driver.
I've tried other NICs in the 2100 that are just not recognised.Steve
-
@stephenw10 are all Newgate HW the same in terms of pcie? I just received a 7100, a 6100max and some 1100 in question.
Any other tricks I can do?
-
No, the 1100 and 2100 share the same arm64 SoC so the have the same pci driver.
The 7100 and 6100 are x86 so very different and much more mature PCIe support.
However in general the WIFI support in FreeBSD, and hence pfSense, is poor. Using an external access point will be better in almost every way.
Steve
-
@stephenw10 do the arm boards show something with "pciconf -lv" without a pcie connected? my 1100 show nothing.
-
No they don't show anything unless a card is present. The card is the only device shown.
[22.05-RELEASE][admin@2100-2.stevew.lan]/root: pciconf -lv [22.05-RELEASE][admin@2100-2.stevew.lan]/root:[22.05-RELEASE][admin@2100-3.stevew.lan]/root: pciconf -lv ath0@pci0:0:0:0: class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00 vendor = 'Qualcomm Atheros' device = 'AR928X Wireless Network Adapter (PCI-Express)' class = networkSteve
-
@stephenw10 uboot shows something though
Is this my pci or on-board nics?
Marvell>> pci long Scanning PCI devices on bus 0 Found PCI device 00.00.00: vendor ID = 0x168c device ID = 0x0033 command register ID = 0x0006 status register = 0x0010 revision ID = 0x01 class code = 0x02 (Network controller) sub class code = 0x80 programming interface = 0x00 cache line = 0x08 latency time = 0x00 header type = 0x00 BIST = 0x00 base address 0 = 0xe8000004 base address 1 = 0x00000000 base address 2 = 0x00000000 base address 3 = 0x00000000 base address 4 = 0x00000000 base address 5 = 0x00000000 cardBus CIS pointer = 0x00000000 sub system vendor ID = 0x19b6 sub system ID = 0xd016 expansion ROM base address = 0xe8020000 interrupt line = 0xff interrupt pin = 0x01 min Grant = 0x00 max Latency = 0x00 Marvell>> -
That is the wifi card. You can see from the vendor/device IDs:
https://pci-ids.ucw.cz/read/PC/168c/0033It's the FreeBSD driver that can't 'see' it for some reason.
Steve
-
@stephenw10 as boot sees it but freebsd not, can I compile a new kernel and add more drivers?? based on arm64 confirmation??? maybe??
-
Not really. For this to work would require more development work on the PCI driver for the Marvell SoC used on the 1100. There is no existing driver that can be added to make this work as it is.
Steve
-
Compex WLE200NX is able to get new for ~30 € and clone from other countries (same chip) will be able to get for ~10 €
so if you will be able to get hands on, it will be the best choice for you to insert WiFi in the SG-1100.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.