Mobile clients have no access to other site

MrV0

I have Pfsense setup at two locations with a site-to-site tunnel from Site A to Site B and traffic can move and is working.
If you are at Site A you can access Site B network and If you are at Site B you can access Site A network, this all works fine.
But if you are not on-site and need to work remotely using the VPN then you cannot access the site you are not contenting to.
I can't seem to get this to work.

VPN to Site A - Has access to Site A but not Site B
VPN to Site B - Has access to Site B but not Site A

Site A
Local network: 10.1.0.0/24
Mobile client virtual address pool: 10.1.1.0/24

Site B
Local network: 10.2.0.0/24
Mobile client virtual address pool: 10.2.1.0/24

Mobile Client setup at Site A and Site B:

Site-to-site at Site A: (The tunnel is disabled in the image because I am having this problem)

viragomann

@mrv0 said in Mobile clients have no access to other site:

Site-to-site at Site A: (The tunnel is disabled in the image because I am having this problem)

But this P2 is needed to connect the remote network with the mobile clients.
Also you need an additional P2 at B with the LAN as local and the A sites mobile pool as remote network.