kern.geom.part.mbr.enforce_chs: 0

NollipfSense

Found this thread: https://forum.netgate.com/topic/110353/impossible-to-install-to-a-4k-aligned-partition-for-ssd/17

Still appear no easy way

stephenw10

You're just trying to set that sysctl?

NollipfSense

@stephenw10 said in kern.geom.part.mbr.enforce_chs: 0:

You're just trying to set that sysctl?

Yes if I can after the install so I can get it to boot.

stephenw10

If it's actually a sysctl then add it in System Tunables.

If it needs to be set before boot try adding it to /boot/loader.conf.local

NollipfSense

@stephenw10 said in kern.geom.part.mbr.enforce_chs: 0:

If it's actually a sysctl then add it in System Tunables.

If it needs to be set before boot try adding it to /boot/loader.conf.local

It would need to set after the install is complete and launch shell before reboot. From here: https://github.com/helloSystem/ISO/issues/200 it seems it have something about install from or to USB. So, If I cannot edit /boot/loader.conf.local since I'll be at the chroot, then I might try burning a DVD.

stephenw10

You can create that file in the prompt after installing.

I can't see anywhere suggesting setting that to some other value though in any of those linked threads.

Steve

NollipfSense

@stephenw10 said in kern.geom.part.mbr.enforce_chs: 0:

You can create that file in the prompt after installing.

I can't see anywhere suggesting setting that to some other value though in any of those linked threads.

Steve

So, how do I create a file? I tried /boot/loader.conf.local and no file found. Also I tried /boot/loader.conf but permission denied because I am not a user yet.

stephenw10

You can just touch /boot/loader.conf.local to create it. Then use ee to edit it.

Or append something to it directly:

echo 'kern.geom.part.mbr.enforce_chs=1' >> /boot/loader.conf.local

Or whatever value you want. I'm not sure that can be loaded there though. Try it.

Steve

NollipfSense

@stephenw10 Didn't work, it seems it has to be done before the install. So, I try installing by iso/DVD.

NollipfSense

@stephenw10 I managed to fix the problem, but it seemed haphazardly. I tried installing pfSense 2.6 by DVD only to realize that the previous memstick method did install the firewall OS despite no OS found rebooting the computer. Then, booting from the DVD would start and hung on synchronizing user. So, I made sure that the bios were set to legacy mode and CAS was disabled then booted the computer. This time it hung on CSM; so, I powered off the computer and reboot again and select single user mode and created the file as you had instructed:
echo 'kern.geom.part.mbr.enforce_chs=1' >> /boot/loader.conf.local

It then completed the boot up, and I could restore backup configuration. We'll upgrade to version 22..5 when my friend return from vacation. Thank you Steve.