pfSense 2.6.0-RELEASE (amd64) - WebGui interface

[Alex the firewall]

I'm not an avid poster but I though I'd ask..

While trying to figure out why the WebGui is slow to load (still trying to work that out) I started at the bottom of the stack and noticed that I have two entries for the firewall web guy.. I know why because I have a host override but (the Q) why is the firewall choosing the first interface / lowest HW address xx:xx:xx:xx:b0:1a for the web configurator?

My config with hostname and domain changed

System / General Setup
Hostname = int
Domain = mydomain.com

webgui = https://int.mydomain.com:10443

Interfaces / Interface Assignments

Interface       HW address          Network	 
WAN	        xx:xx:xx:xx:b0:18   (DCHP from ISP)
Infra	        xx:xx:xx:xx:b0:1a   192.168.99.0/24
LAN	        xx:xx:xx:xx:b0:1b   192.168.10.0/24
WORK            xx:xx:xx:xx:b0:1c   192.168.30.0/24
InternetofTurd  xx:xx:xx:xx:b0:1d   192.168.40.0/24

alexs@alexs~ % host int.mydomain.com
int.mydomain.com has address 192.168.99.1
int.mydomain.com has address 192.168.10.1
alexs@alexs~

Thanks

Alex

[stephenw10]

The webgui listens on all the firewall IPs.

How do you have the host override configured?

Steve