IPv6 HE.net tunneling is broken on the latest snapshots

w0w

Everything is done according to https://docs.netgate.com/pfsense/en/latest/recipes/ipv6-tunnel-broker.html
22.05 works, 22.11 not getting IP on the HE interface.
22.11/22.05 ifconfig looks identical

gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1280
	description: HENETv6
	options=80000<LINKSTATE>
	tunnel inet 84.x.44.x --> 216.66.80.90
	inet6 2001:xx0:27:yy1::2 --> 2001:xx0:27:yy1::1 prefixlen 128
	inet6 fe80::a236:9fff:fec3:4a2c%gif0 prefixlen 64 scopeid 0xa
	groups: gif
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

In the GUI on the status page for the HENETv6 it shows n/a instead of IPv6 address of tunnel

Also Status - Interfaces 22.11


HENETV6 Interface (opt3, gif0)

Status
    up 
IPv6 Link Local
    fe80::a236:9fff:fec3:4a2c%gif0 
MTU
    1280 
In/out packets
    0/8 (0 B/696 B) 
In/out packets (pass)
    0/8 (0 B/696 B) 
In/out packets (block)
    633/0 (90 KiB/0 B) 
In/out errors
    0/0 
Collisions
    0

LAN interface, however, shows the correct IPv6 address on both versions

If I look at Diagnostics - Routes
the on the 22.11 the default route for IPv6 is just missing

22.05
on the top is

IPv6 Routes
default	2001:xx0:27:yy1::1	UGS	96	1280	gif0
::1	link#6	UH	124	16384	lo0	
::10.10.10.1	link#6	UHS	0	16384	lo0	
2001:xx0:27:yy1::1	link#10	UH	1007	1280	gif0	
2001:xx0:27:yy1::2	link#10	UHS	0	16384	lo0	
2001:xx0:28:yy1::/64	link#2	U	3199	1500	ix1	
2001:xx0:28:yy1::1	link#2	UHS	0	16384	lo0	
.....

and

22.11

IPv6 Routes
::1	link#6	UH	53	16384	lo0	
::10.10.10.1	link#6	UHS	0	16384	lo0	
2001:xx0:27:yy1::1	link#10	UH	0	1280	gif0	
2001:xx0:27:yy1::2	link#10	UHS	0	16384	lo0	
2001:xx0:28:yy1::/64	link#2	U	4603	1500	ix1	
2001:xx0:28:yy1::1	link#2	UHS	0	16384	lo0	
......

The result is that on the 22.11 snapshot, IPv6 is not working. You can't ping anything on IPv6 net from pfSense also from the LAN side.

Gertjan

Not related, but :

@w0w said in IPv6 HE.net tunneling is broken on the latest snapshots:

MTU
1280

are you sure of this MTU ?
As soon as bytes get flowing again, try to optimize this setting. These days a 1400++ should be possible.
The same MTU value has to set set on the advanced tunnel.he.net admin page.

w0w

@gertjan
I did not tune this value
HE page shows 1492.

22.05 IPv6 works fine just from boot and ISP connecting (PPPoE)
22.11 IPv6 is not working at all. Nothing have been changed in config.

Gertjan

@w0w said in IPv6 HE.net tunneling is broken on the latest snapshots:

HE page shows 1492.

Then

(mine is 1472)

Do some fragment testing.
As soon as your issue gets resolved.

w0w

@gertjan said in IPv6 HE.net tunneling is broken on the latest snapshots:

Do some fragment testing.
As soon as your issue gets resolved.

It is resolved by booting back to 22.05 selecting boot environments
So what is the test sequence?

 ping6 -s 1430 ipv6.google.com
PING6(1478=40+8+1430 bytes) 2001:470:27:191::2 --> 2a00:1450:4026:802::200e
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=0 hlim=119 time=15.573 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=1 hlim=119 time=15.596 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=2 hlim=119 time=17.614 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=3 hlim=119 time=15.637 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=4 hlim=119 time=15.830 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=5 hlim=119 time=15.645 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=6 hlim=119 time=17.834 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=7 hlim=119 time=15.632 ms
76 bytes from 2a00:1450:4026:802::200e, icmp_seq=8 hlim=119 time=15.603 ms
^C
--- ipv6.l.google.com ping6 statistics ---
9 packets transmitted, 9 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 15.573/16.107/17.834/0.869 ms

The packet size maxed out at 1430, so MTU results in 1478 and HE closest setting is 1480

Anyway with this setting set or not I have https://test-ipv6.com/ 10/10 and zero problems with IPv6 connections on 22.05

w0w

Same on the Version 22.09.a.20220802.0600
Does anyone using HE tunnelbroker on the 22.09?

rojo8399

@w0w Found this thread because I can't get IPv6 HE.net tunneling to work on 22.09.
Problem I'm running into is that when I create the GIF and an interface for it, no default gateway is automatically created, unlike what all documentation states.

jimp

This is a known issue and we have a fix coming soon:

https://redmine.pfsense.org/issues/11545#note-38

w0w

@jimp
Applied patch to

22.09-DEVELOPMENT (amd64)
built on Fri Jul 29 06:14:54 UTC 2022
FreeBSD 12.3-STABLE

IPv6 is working now, shows correct route, but after some time IPv6 connection is lost. Will do further test, to check everything again.

w0w

Looks like IPv6 is working now, there were problems on the ISP side.