Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    No internet

    Scheduled Pinned Locked Moved General pfSense Questions
    13 Posts 4 Posters 966 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      Jarhead @beatgeek
      last edited by

      @beatgeek "release and renew", Did you have an IP on the WAN?
      Do you have a cable modem or is it a gateway device? IOW, should pfSense be receiving a public IP?
      Do you have "Block private networks and loopback addresses" selected?

      B 1 Reply Last reply Reply Quote 0
      • B
        beatgeek @Jarhead
        last edited by

        @jarhead
        the network (simplified while troubleshooting) is:

        cable from wall -> cable modem -> netgate 1100 wan port -> lan port to laptop

        block private networks is selected for wan. everything is at factory default right now.

        i ran a packet capture. it didn't really show much, a lot of broadcast arps asking "who has... tell..." , some DHCP discovers, a few router solicitations, and ping requests (no response found)

        1 Reply Last reply Reply Quote 0
        • B
          beatgeek
          last edited by

          also, following this:
          https://docs.netgate.com/pfsense/en/latest/troubleshooting/connectivity.html

          my isp assigns me a dynamic address, not static, so most of the first steps to check there are irrelevant. the step that fails is "check that the default gateway shows online". instead it shows "pending". but i don't know how to fix this.

          V 1 Reply Last reply Reply Quote 0
          • V
            viragomann @beatgeek
            last edited by

            @beatgeek
            Does pfSense get a WAN IP at all. Check Status > interfaces.

            Any special settings on the WAN interface?

            Check the DHCP log for related entries.

            You can also run a packet capture on WAN, set the port filter to "67|68" to get only DHCP related packets.
            You should see a DHCP request and a response from the server. Post what you get, please.

            B 1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              dpinger showing 'pending' like that usually means it has no gateway IP to try to ping yet. So usually the dhcp client hasn't completed on WAN.

              1 Reply Last reply Reply Quote 0
              • B
                beatgeek @viragomann
                last edited by stephenw10

                @viragomann

                No special WAN settings. This is all I see for the WAN status:

                WAN Interface (wan, mvneta0.4090, switchports: 0t 3)
Status
up 
DHCP
up 
MAC Address
f0:ad:4e:20:75:5c 
IPv6 Link Local
fe80::f2ad:4eff:fe20:755c%mvneta0.4090 
MTU
1500 
Media
1000baseT <full-duplex,master> 
In/out packets
20/15 (8 KiB/1 KiB) 
In/out packets (pass)
20/15 (8 KiB/1 KiB) 
In/out packets (block)
0/0 (0 B/0 B) 
In/out errors
0/0 
Collisions
0

                Here are some DHCP logs:

                Deleting old routes 
PREINIT 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 3 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 3 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 7 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 11 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 14 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 16 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 3 
No DHCPOFFERS received. 
Trying recorded lease 216.15.18.38 
TIMEOUT 
Starting add_new_address() 
ifconfig mvneta0.4090 inet 216.15.18.38 netmask 255.255.240.0 broadcast 255.255.255.255 
New IP Address (mvneta0.4090): 216.15.18.38 
New Subnet Mask (mvneta0.4090): 255.255.240.0 
New Broadcast Address (mvneta0.4090): 255.255.255.255 
New Routers (mvneta0.4090): 216.15.16.1 
New Routers (mvneta0.4090): 216.15.16.1 
Deleting old routes 
No working leases in persistent database - sleeping. 
FAIL 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 4 
Cannot open or create pidfile: No such file or directory 
PREINIT 
EXPIRE 
Deleting old routes 
PREINIT 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 5 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 12 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 19 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 10 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 6 
No DHCPOFFERS received. 
Trying recorded lease 216.15.18.38 
TIMEOUT 
Starting add_new_address() 
ifconfig mvneta0.4090 inet 216.15.18.38 netmask 255.255.240.0 broadcast 255.255.255.255 
New IP Address (mvneta0.4090): 216.15.18.38 
New Subnet Mask (mvneta0.4090): 255.255.240.0 
New Broadcast Address (mvneta0.4090): 255.255.255.255 
New Routers (mvneta0.4090): 216.15.16.1 
New Routers (mvneta0.4090): 216.15.16.1 
Deleting old routes 
No working leases in persistent database - sleeping. 
FAIL 
connection closed 
exiting. 
Cannot open or create pidfile: No such file or directory 
PREINIT 
EXPIRE 
Deleting old routes 
PREINIT 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 5 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 10 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 11 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 12 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 7 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 11 
No DHCPOFFERS received. 
Trying recorded lease 216.15.18.38 
TIMEOUT 
Starting add_new_address() 
ifconfig mvneta0.4090 inet 216.15.18.38 netmask 255.255.240.0 broadcast 255.255.255.255 
New IP Address (mvneta0.4090): 216.15.18.38 
New Subnet Mask (mvneta0.4090): 255.255.240.0 
New Broadcast Address (mvneta0.4090): 255.255.255.255 
New Routers (mvneta0.4090): 216.15.16.1 
New Routers (mvneta0.4090): 216.15.16.1 
Deleting old routes 
No working leases in persistent database - sleeping. 
FAIL 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 1 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 2 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 3 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 4 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 4 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 11 
logfile turned over due to size>500K 
logfile turned over due to size>500K 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 8 
Internet Systems Consortium DHCP Server 4.4.2-P1 
Copyright 2004-2021 Internet Systems Consortium. 
All rights reserved. 
For info, please visit https://www.isc.org/software/dhcp/ 
Config file: /etc/dhcpd.conf 
Database file: /var/db/dhcpd.leases 
Internet Systems Consortium DHCP Server 4.4.2-P1 
PID file: /var/run/dhcpd.pid 
Copyright 2004-2021 Internet Systems Consortium. 
All rights reserved. 
For info, please visit https://www.isc.org/software/dhcp/ 
Wrote 0 class decls to leases file. 
Wrote 12 leases to leases file. 
Listening on BPF/mvneta0.4091/f0:ad:4e:20:75:5c/192.168.1.0/24 
Sending on BPF/mvneta0.4091/f0:ad:4e:20:75:5c/192.168.1.0/24 
Sending on Socket/fallback/fallback-net 
Server starting service. 
DHCPDISCOVER on mvneta0.4090 to 255.255.255.255 port 67 interval 14 
TIMEOUT

                Here's a sample of the packet capture for port 67|68:

                02:57:15.897310 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300
02:57:17.905077 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300
02:57:19.966338 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300
02:57:21.998077 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300
02:57:22.085843 IP 10.17.160.1.67 > 255.255.255.255.68: UDP, length 394
02:57:24.122624 IP 10.17.160.1.67 > 255.255.255.255.68: UDP, length 394
02:57:26.207230 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300
02:57:36.949075 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300
02:57:42.406159 IP 10.17.160.1.67 > 255.255.255.255.68: UDP, length 347
02:57:42.461459 IP 10.17.160.1.67 > 255.255.255.255.68: UDP, length 347
02:57:47.949284 IP 0.0.0.0.68 > 255.255.255.255.67: UDP, length 300

                In Wireshark it describes most of those as "DHCP Discover"

                V J 2 Replies Last reply Reply Quote 0
                • V
                  viragomann @beatgeek
                  last edited by

                  @beatgeek
                  As seen in the log, pfSense is sending a lot of DHCPDISCOVER, but gets no DHCPOFFER.

                  That it works with another router let me suspect that the pfSense MAC is banned by the ISP for whatever reason.
                  So I would find out the WAN side MAC of the other router and spoof it on pfSense to circumvent this.

                  1 Reply Last reply Reply Quote 0
                  • J
                    Jarhead @beatgeek
                    last edited by Jarhead

                    @beatgeek said in No internet:

                    @viragomann

                    No special WAN settings. This is all I see for the WAN status:
                    WAN Interface (wan, mvneta0.4090, switchports: 0t 3)
                    Status
                    up
                    DHCP
                    up
                    MAC Address
                    f0:ad:4e:20:75:5c
                    IPv6 Link Local
                    fe80::f2ad:4eff:fe20:755c%mvneta0.4090
                    MTU
                    1500
                    Media
                    1000baseT <full-duplex,master>
                    In/out packets
                    20/15 (8 KiB/1 KiB)
                    In/out packets (pass)
                    20/15 (8 KiB/1 KiB)
                    In/out packets (block)
                    0/0 (0 B/0 B)
                    In/out errors
                    0/0
                    Collisions
                    0

                    Did you copy/paste this? There's no IPv4 entry.
                    Post a pic of your WAN settings.
                    Any chance you have IPv4 settings to "none"?

                    1 Reply Last reply Reply Quote 0
                    • B
                      beatgeek
                      last edited by

                      After booting pfsense back up again, it's mysteriously working now, with no settings changes. WAN status is up, internet works. I guess rebooting pfsense 13 times wasn't enough, it needed a 14th reboot to start working. 😉

                      J 1 Reply Last reply Reply Quote 0
                      • J
                        Jarhead @beatgeek
                        last edited by

                        @beatgeek said in No internet:

                        After booting pfsense back up again, it's mysteriously working now, with no settings changes. WAN status is up, internet works. I guess rebooting pfsense 13 times wasn't enough, it needed a 14th reboot to start working. 😉

                        Or you had IPv4 set to none. 😊

                        V 1 Reply Last reply Reply Quote 0
                        • V
                          viragomann @Jarhead
                          last edited by

                          @jarhead said in No internet:

                          Or you had IPv4 set to none. 😊

                          I don't expect that pfSense was sending out DHCPDISCOVER on WAN in this case.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Mmm, it was set as DHCP and just never received a response so the status page shows no IPv4 address.

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.