SG-5100 takes over 20 minutes to boot after eMMC failure
-
@hayescompatible appreciate the info on the SSD and the MMC monitoring. I’ll look into that tomorrow as I cannot afford for these to crap out, especially as one is a vpn endpoint 7000 miles away.
-
@hayescompatible just to be sure, the ssd that the 5100 takes is indeed a sata III ( with 3 connection points versus 2)?
-
Well for the very distant 5100, my results are:
eMMC Life Time Estimation A [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]: 0x0b eMMC Life Time Estimation B [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]: 0x0b eMMC Pre EOL information [EXT_CSD_PRE_EOL_INFO]: 0x01
For my local box, it gives me:
eMMC Life Time Estimation A [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]: 0x0b eMMC Life Time Estimation B [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]: 0x0b eMMC Pre EOL information [EXT_CSD_PRE_EOL_INFO]: 0x01
How worried should I be? Seems like the drive is normal but the A and B values are at or above 100%
-
Mmm, that's not great, is that the first time you've checked the values?
-
@stephenw10 <<gulp>> Yup. Had no idea this was a thing to be honest. To date, I have never had a hard drive fail in any of my computer devices, including an 8 bay NAS that has been running Western Digital Red drives since like 2013. I've already ordered the m.2 but now I am worried about experiencing the same delayed restart shenanigans.
-
@gabacho4 said in SG-5100 takes over 20 minutes to boot after eMMC failure:
@hayescompatible just to be sure, the ssd that the 5100 takes is indeed a sata III ( with 3 connection points versus 2)?
It's a SATA drive - see M.2 SATA Installation. I don't remember what the connector looked like because it's been a while since I installed it, but looks like it's a B+M key. (Check the model number of the drive I linked to earlier—you'll see B+M keying.)
-
I purchased the Transcend 430S M.2 512 GB SATA III 3D NAND. Works perfectly except the boot issue. I am working with Netgate support to see if I can get the issue resolved. Will report back if I have a solution.
-
On advice of Netgate Support I did a clean reinstall with UFS (was on ZFS). The problem remains exactly the same. I feel the problem is the eMMC memory that is toast but still is getting poked by the 5100. I expected it to be disabled after installing my M.2 SSD, but it is clearly not.
Loads of these error message in the logs:
mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout sdhci_pci0-slot0: Controller timeout sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x05840000 | Version: 0x00001002 sdhci_pci0-slot0: Blk size: 0x00005200 | Blk cnt: 0x00000010 sdhci_pci0-slot0: Argument: 0x00000010 | Trn mode: 0x00000033 sdhci_pci0-slot0: Present: 0x1fff0206 | Host ctl: 0x00000025 sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000001 sdhci_pci0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000c sdhci_pci0-slot0: Caps: 0x546ec8b2 | Caps2: 0x80000007 sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_pci0-slot0: =========================================== mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout sdhci_pci0-slot0: Controller timeout sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x05840000 | Version: 0x00001002 sdhci_pci0-slot0: Blk size: 0x00005200 | Blk cnt: 0x00000010 sdhci_pci0-slot0: Argument: 0x00000200 | Trn mode: 0x00000033 sdhci_pci0-slot0: Present: 0x1fff0206 | Host ctl: 0x00000025 sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000001 sdhci_pci0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000c sdhci_pci0-slot0: Caps: 0x546ec8b2 | Caps2: 0x80000007 sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_pci0-slot0: =========================================== mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout
Now I am surfing the internet to see if somebody succeeded in actually getting this memory disabled.
Harald
-
@haraldinho very unfortunate to hear indeed. So far my eMMC isn’t giving me any issues that I know of but, based on the data, it looks like I’m due to have them.l eventually. I have 2 M.2 ssd on their way to this and the remote location. Crazy that what was a 600 dollar device can be crippled by something like this. Not being able to restart a device and having to rely on someone to physically power it back on is nuts. Gonna have to start considering my options if a real fix cannot be found.
-
@haraldinho You can disable it completely in pfSense and prevent those errors.
Create the file /boot/loader.conf.local and add to it:hint.mmcsd.0.disabled="1"
But that doesn't help with the slow boot in the BIOS.
Steve
-
Since these are Lanner devices, have they been contacted regarding BIOS updates or anything? Seems they might be the last real hope since it’s their hardware, maybe?
-
Yes, we are working with them on a BIOS update now. It isn't to address this specifically but hopefully could do so.
Steve
-
That makes me happy. Like the others, I would have assumed that whatever internal BIOS check takes place would identify, or could be told, that the eMMC wasn’t installed/working and be pointed to the M.2 SSD. That was my intended mitigation, based on that assumption, some day in the future should the internal memory ever die. Here’s to hoping they can make it happen.
Is this issue that potentially afflicts EVERY Netgate router with internal memory and the M.2 expansion capability?
-
@stephenw10 said in SG-5100 takes over 20 minutes to boot after eMMC failure:
Yes, we are working with them on a BIOS update now. It isn't to address this specifically but hopefully could do so.
Steve
That sounds promising, I'm hopeful this problem will be addressed.
Honestly, this is what's preventing me from getting either of the 4100 or 6100 BASE models—if those don't gracefully handle failures of the eMMC either, then it's pretty much a certainty that the only way to ensure long-term reliability is to spring for the MAX versions or install an SSD yourself… in which case, there should be more prominent warnings made about the effects of an eMMC failure, how to monitor its health, more warnings in pfSense when enabling options that could potentially shorten its lifespan, etc.
-
@stephenw10 Hi Steve, it is really good to hear that there is a BIOS update in the works for the 5100. I would really appreciate if this specific issue could be taken along in the update. It does not seem to be a big thing to do and would really uncripple the devices of people with a dead eMMC. @stephenw10 is this something you can take up with the firmware folks and report back here?
-
I can certainly look into it.
-
@stephenw10 Hi Stephen, I thought to give this little hack a try and hey presto! My boot issues are gone!! I can do a warm reboot now without any issues! Speed is also good!
So a happy camper here! The only drawback to this solution is that you have to SSH into your box to do it and it will be wiped with a clean install. So it would still be best to solve it in BIOS or with some setting in pfSense where you can disable eMMC on Netgate boxes suffering from the issue.
Thanks Stephen!
-
@haraldinho what is the hack to which you refer?
EDIT: do you mean creating the file that Stephen mentioned earlier? If so, that is a great interim fix while they hopefully get something more permanent and formal put in place.
-
@gabacho4 the forum indentation is a bit confusing indeed. I replied to the post from @stephenw10 with the 'hack' and it then shows that post as a reply to Stephens post, but also as a new post at the bottom of the whole topic, with just a small reference to the fact that it is a reply to an earlier message. Anyway, the life saving configuration change is this:
Create the file /boot/loader.conf.local and add to it:
hint.mmcsd.0.disabled="1"It is as simple as that :-)
The only thing I am not sure about is what happens to this setting when you do a regular upgrade to a new version of pfsense. @stephenw10 does it get preserved?
-
@haraldinho said in SG-5100 takes over 20 minutes to boot after eMMC failure:
@gabacho4 the forum indentation is a bit confusing indeed. I replied to the post from @stephenw10 with the 'hack' and it then shows that post as a reply to Stephens post, but also as a new post at the bottom of the whole topic, with just a small reference to the fact that it is a reply to an earlier message. Anyway, the life saving configuration change is this:
Create the file /boot/loader.conf.local and add to it:
hint.mmcsd.0.disabled="1"It is as simple as that :-)
The only thing I am not sure about is what happens to this setting when you do a regular upgrade to a new version of pfsense. @stephenw10 does it get preserved?
I'll have to try that later when I'm able to reboot my 5100. Sounds promising.