How to get pfSense WAN to accept VLAN 0
-
@jarhead Thank you jarhead for the confirmation.
Its taking Netgate way too long to fix this problem, I am not sure if we dont have adecuate people working on the development of this solution....but if it is indeed fixed under OPNsense why can pfsense that has been longer in the market than OPN able to fix this? I dont understand.
-
As I understand it opnsense inherited this fix with the move to FreeBSD 13. That will happen in pfSense when we move from 12-stable in the next release.
Developer time is limited and the resources required to backport it to 12 are not justified for the relatively small number of users who are hitting it. Especially when there are workarounds and it will be fixed anyway by the base update.Steve
-
@stephenw10 Steve, should we expect this ot be fix under 2.7?
is there a timely for the 2.7 release, at least is there a month where the Negate team is planning this released?
-
@cucu007 said in How to get pfSense WAN to accept VLAN 0:
should we expect this ot be fix under 2.7?
Since the dev snapshots you can get now currently list 12.3 stable, I would find it surprising that they would move to freebsd 13 in mid development. Anything is possible I guess - but if I was going to place a bet, my bet would be that wouldn't happen.
-
@johnpoz Steve, can you shine some light on this rationale?
-
2.7 is just a number after 2.6.
The actual version used is not determined until a release branch is created. I expect CE snapshots to be re-based before that happens given the current development work.
Steve
-
@stephenw10 said in How to get pfSense WAN to accept VLAN 0:
I expect CE snapshots to be re-based before that happens given the current development work
Steve,
What does this mean "I expect CE snapshots to be re-based before that happens given the current development work"
Are we expected to see this fix on the next release or not?
-
If the fix you mean is in the e1000 driver that is part of FreeBSD 13 then, yes, I expect that to be in CE snapshots before a 2.7 release is branched.
Steve
-
@stephenw10 Thank you Steve for the confirmation, as you know this is driving some of us insane. :-)
-
@stephenw10 said in How to get pfSense WAN to accept VLAN 0:
If the fix you mean is in the e1000 driver that is part of FreeBSD 13 then, yes, I expect that to be in CE snapshots before a 2.7 release is branched.
Steve
Just to clarify, you said the e1000 driver is already in the 2.7 snapshots, yet the vlan0 issue is not fixed by that. Just tried the latest to verify again. Vlan0 is still not working in it.
Are you saying the vlan0 fix is to be added to 2.7 at a later date?
-
He is hinting pfsense v2.7 will probably be based on BSD v13 by the time it is released.
But he isn’t going to guarantee it because he does not know what problems will be encountered until after it is done and can’t be certain it will fix your problem until your problem has been tested with the v2.7 release.
-
@patch said in How to get pfSense WAN to accept VLAN 0:
He is hinting pfsense v2.7 will probably be based on BSD v13 by the time it is released.
But he isn’t going to guarantee it because he does not know what problems will be encountered until after it is done and can’t be certain it will fix your problem until your problem has been tested with the v2.7 release.
Oh, I didn't get that at all. From what I understood from his "hint", they ported the e1000 driver thinking that would fix the vlan0 issue. But I don't think that's the fix we all want. Meaning it doesn't fix vlan0 compatibility.
Edit;
On another note, does anyone know if that script works on the chelsio (cxlx) driver? -
Since I don't have anything using this setup I can't test it directly so my understanding here is based on when others have reported here, in the pfatt thread and the bug reports.
As I understand it:The script itself works fine.
It cannot work with the e1000 driver in FreeBSD 12.2/3 because the driver itself fails to pass VLAN0 tagged packets.
The driver in FreeBSD 13 does not have this issue. Proven by people testing in OPN. Unless they patched the driver for this specifically.
2.7 when it is branched for release will not be based on FreeBSD 12 so should also include that fix.Anyone seeing something disagrees with that?
Steve
-
https://docs.netgate.com/pfsense/en/latest/releases/versions.html
-
It shows 12.3 there because that's what current snapshots were built on.
-
@stephenw10 Steve,
Do we have some sort of timeline when the newer snapshots (based on BSD v13) will be compile and release to the community to test? -
Nothing fixed but I would guess 'weeks'. We have some initial snapshots internally and are working through the show-stopping issues as quickly as possible so we can restart public snapshot builds.
-
Hey All, you guys see that pfsense is skipping over freebsd 13 and going straight to 14. I'm gonna find some spare hardware and load 14 on it and check it as I haven't yet.
-
@michaellacroix Wonder if this means vlan0 will be handled natively by pfsense
-
@schwiing
It was in freebsd 13 so I assume??? it will be in 14.
