Unable to check for updates (SOLVED)

bingo600

Here is a "One Liner" , that ought to fix it.

sed -i "" 's/url: "/url: "pkg+https:\/\/firmware.netgate.com\/pkg/g' /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf

Note:
/usr/local/etc/pkg/repos/pfSense.conf - Is symlinked to /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf

ls -l /usr/local/etc/pkg/repos/pfSense.conf                                            lrwxr-xr-x  1 root  wheel  52 Sep  2 19:36 /usr/local/etc/pkg/repos/pfSense.conf -> /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf

And sed won't work on a symlink

Therefore the "One-Liner" refers to the real file , not the symlinked one.

sed -i "" 's/url: "/url: "pkg+https:\/\/firmware.netgate.com\/pkg/g' /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf

Backup your existing : /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf , before using the above command.

Something like

cp /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf /usr/local/share/pfSense/pkg/repos/pfSense-repo.conf.org

After fixing with the "One-Liner" maybe update the repos from CLI:

pkg-static -d update

/Bingo

Bob.Dig

@jimp I hope netgate will fix it too.

bingo600

@bob-dig said in Unable to check for updates:

@jimp I hope netgate will fix it too.

That could be a "Chicken / Egg" issue, if the pfS uses those url's to fetch everything.

Even though it's weekend , i find it a bit strange that we haven't heard anything from Netgate, not even an ACK.

/Bingo

Bob.Dig

@bingo600 But why now, it has worked until yesterday, I am on 22.05 for months now. So what has changed when? Sry, for not getting the root of the problem.

bingo600

@bob-dig
See my initial post here

https://forum.netgate.com/post/1062012

And note that my DK FW (with the issue) updated to 22.05_5 at 01:00 CEST

Sep 17 01:00:03 	pkg-static 	24861 	pfSense-repo upgraded: 22.05_2 -> 22.05_5

My SE FW (with no issue) updated to 22.05_9 at 08:11 CEST

Sep 17 08:11:49 	pkg-static 	55031 	pfSense-repo upgraded: 22.05_2 -> 22.05_9

My guess is that the 22.05_05 update somehow FSCK'ed up the repos url's. And that Netgate got it fixed, sometime in the 01:00 to 08:11 timeframe.

So "Slow updaters" are not affected , "Fast updaters" are affected.

/Bingo

Bob.Dig

@bingo600 So we are talking not about an update of pfSense to a new version but to the repos stored in pfSense? And there is no Boot Environment for fixing it. Also there is nothing in Config History, maybe because I changed stuff today.

But lets say, I didn't changed something of interest in the last two days, I can use my own backup und it should be good. I will try that.

bingo600

@bob-dig said in Unable to check for updates:

@bingo600 So we are talking not about an update of pfSense to a new version but to the repos stored in pfSense?

Yes, a repos update ... And the naming might hint that 22.09 is close.

And there is no Boot Environment for fixing it.

I do not know pfSense well enough to know if there is another way of downloading a fix.

Also there is nothing in Config History, maybe because I changed stuff today.

I saw it (the update) in the System General Log

.
.

But lets say, I didn't changed something of interest in the last two days, I can use my own backup und it should be good. I will try that.

Your config should not have been affected , and restoring the config would not fix it.

A full reinstall would probably fix it, as it would pull the '09 repos update not the '05.
But that would (IMHO) be a lot of hassle, in order to avoid doing a ssh admin@xxxxxx , select 8 , and do the "One-Liner"

/Bingo

mcury

@bingo600 said in Unable to check for updates:

Yes, a repos update ... And the naming might hint that 22.09 is close.

I think it is close indeed..
https://redmine.pfsense.org/projects/pfsense-plus/issues?fixed_version_id=60&set_filter=1&status_id=%2A

sgc

This is what NetGate support sent to me about this problem.

Diagnostics --> Edit File --> and in the "Path to file to be Edited", please enter the following and click "Load":

/usr/local/share/pfSense/pkg/repos/pfSense-repo.conf

You can then replace the file with the following contents and hit "Save". This will resolve your issue:

FreeBSD: { enabled: no }

pfSense-core: {
url: "pkg+https://firmware.netgate.com/pkg/pfSense_plus-v22_05_amd64-core",
mirror_type: "srv",
signature_type: "fingerprints",
fingerprints: "/usr/local/share/pfSense/keys/pkg",
enabled: yes
}

pfSense: {
url: "pkg+https://firmware.netgate.com/pkg/pfSense_plus-v22_05_amd64-pfSense_plus_v22_05",
mirror_type: "srv",
signature_type: "fingerprints",
fingerprints: "/usr/local/share/pfSense/keys/pkg",
enabled: yes
}

The problem is gone after changing this.

Bob.Dig

@bingo600
I rolled back an "Image" from yesterday mornings backup, fixed it as well. The good thing about all that, I just noticed that I can't roll back an Image of pfSense when it is not running, do to the way I built my network lately, so I had to change that again.

I think the (official) solution should be pinned somehow.

bingo600

@bob-dig
How did you do that "image backup" ?
Via the new Boot Environment in 22.05 ?

Wonder if that one would restore the system too ?
Anyone knows ???

stephenw10

This is fixed now. As noted the newer repo pkg has the correct URL.

If you're still seeing it, because the firewall pulled in the bad pkg, then switching the update branch to development and then back to latest stable will pull in the fixed pkg.

Doing that you will see logged:

Sep 17 15:36:45 	pkg-static 	13430 	pfSense-repo upgraded: 22.05_5 -> 22.09.a.20220802.0600
Sep 17 15:37:19 	pkg-static 	22387 	pfSense-repo downgraded: 22.09.a.20220802.0600 -> 22.05_9

Steve

Bob.Dig

@bingo600 said in Unable to check for updates:

@bob-dig
How did you do that "image backup" ?

I use a vm for pfSense.

@stephenw10 said in Unable to check for updates:

This is fixed now.

Too bad I can't test this slick approach to that problem anymore.

bingo600

@bob-dig said in Unable to check for updates:

@bingo600 said in Unable to check for updates:

@bob-dig
How did you do that "image backup" ?

I use a vm for pfSense.

Ahh

Innz

Awesome! Worked on my 6100 without any issues

KB8DOA

This is creepy - I am getting this but never initiated any sort of update.
I only noticed as I about weekly go and peek at "Package Manager"
to see if I need to do any Package Updates (or install something new).

On this pfSense+ on an SG-5100
v22.01
I was holding off on upgrades, as I wanted to be sure that my OpenVPNs were not going to be "broken" because of changes recently done on recent releases.

I am willing to accept that this final resolution might actually upgrade me to v22.05

I need advice on whether I should try to fix it using the advice already previously mentioned here on this Forum Topic

which might be meant for those that have intentionally upgraded to v22.05 ?

bingo600

@kb8doa
This way of fixing it, came from our resident Netgate guru.
https://forum.netgate.com/post/1062058

/Bingo

KB8DOA

@bingo600

It is not working for me.

I am running v22.01 on a SG-5100
Should I really have "pfSense_plus-v22_05_amd64-core" in that file?

Perhaps a reboot has to happen, to make this effective?

bingo600

@kb8doa

That sounds right you have an Intel CPU

Does your file look like this ?

Else there was a guide how to Edit the file manually here.
https://forum.netgate.com/post/1062052

But you could try a reboot first

KB8DOA

@bingo600

Can you clarify:
I am running v22.01
Should the pfSense.conf file have pfSense_plus-v22_05_amd-core ?

And do I need to reboot after fixing this?