How to get pfSense WAN to accept VLAN 0

cucu007

@stephenw10 Steve,
Do we have some sort of timeline when the newer snapshots (based on BSD v13) will be compile and release to the community to test?

stephenw10

Nothing fixed but I would guess 'weeks'. We have some initial snapshots internally and are working through the show-stopping issues as quickly as possible so we can restart public snapshot builds.

michaellacroix

@stephenw10

Hey All, you guys see that pfsense is skipping over freebsd 13 and going straight to 14. I'm gonna find some spare hardware and load 14 on it and check it as I haven't yet.

Schwiing

@michaellacroix Wonder if this means vlan0 will be handled natively by pfsense

michaellacroix

@schwiing
It was in freebsd 13 so I assume??? it will be in 14.

Schwiing

@michaellacroix guess y'all will have to let me know. The fiber feeder got delayed at my residence anyhow

stephenw10

It should certainly contain any fixes that are in 13, yes. Though I don't think that includes a fix for the e1000 driver not passing it.

Schwiing

@stephenw10 i have ix anyway. But perhaps this means netgraph wont be needed anymore

michaellacroix

@stephenw10
Its suppose to have a ton of driver updates so we will keep our fingers crossed for you....

stephenw10

Yeah, the situation is unclear because we have reports here and in other threads that conflict with test results. What I can say is that testing is much easier in main because you can just set a priority tag on any interface using ifconfig directly:

[2.7.0-DEVELOPMENT][admin@m470-2.stevew.lan]/root: ifconfig igb12 pcp 4
[2.7.0-DEVELOPMENT][admin@m470-2.stevew.lan]/root: ifconfig igb12
igb12: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: PCP0
	options=4e100bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
	ether 00:90:7f:db:ca:b2
	pcp 4
	inet6 fe80::290:7fff:fedb:cab2%igb12 prefixlen 64 scopeid 0xd
	inet 10.13.0.1 netmask 0xffffff00 broadcast 10.13.0.255
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

And then you will see:

23:16:10.138805 00:90:7f:db:ca:b2 > 00:90:7f:87:dc:7a, ethertype 802.1Q (0x8100), length 102: vlan 0, p 4, ethertype IPv4, (tos 0x0, ttl 64, id 53358, offset 0, flags [none], proto ICMP (1), length 84)
    10.13.0.1 > 10.13.0.2: ICMP echo request, id 59732, seq 0, length 64

However the em NIC I'm sending that to, also under 2.7-dev (main) does not see that packet at all.
Testing against a different NIC type though, fxp here, the traffic is seen and we see responses:

23:20:18.274026 00:90:7f:db:ca:b2 > 00:90:7f:87:dc:74, ethertype 802.1Q (0x8100), length 102: vlan 0, p 4, ethertype IPv4, (tos 0x0, ttl 64, id 26894, offset 0, flags [none], proto ICMP (1), length 84)
    10.13.0.1 > 10.13.0.2: ICMP echo request, id 60464, seq 0, length 64
23:20:18.274140 00:90:7f:87:dc:74 > 00:90:7f:db:ca:b2, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 36849, offset 0, flags [none], proto ICMP (1), length 84)
    10.13.0.2 > 10.13.0.1: ICMP echo reply, id 60464, seq 0, length 64

The confusing thing though is that that also works when testing against an igc NIC in 22.05 and my understanding was that it should not....

michaellacroix

@stephenw10

Thanks Stephen, thats good to know.

Jarhead

@stephenw10
Is there any chance vlan0 can be fixed in 2.6 with tunable??
Reason I'm asking is my brother uses pfSense also, and he does not have a problem getting an address from Frontier. My router at his house does not get an address because of vlan0.
I had him give me his config and I'm gonna try to put it on the same hardware he uses to see if it works at my house but I can't imagine it's that easy.
Just a fluke maybe?

stephenw10

I'm not aware of any tunable that would do it. What driver is that? Did you try 22.05 there? Or are you able to?

Jarhead

@stephenw10
I didn't.
He's using 2.6 as am I and I can't understand why he's not effected by vlan0.

michaellacroix

@jarhead Is her using pfsense as a VM? The software switch strip out the vlan tag

Jarhead

@michaellacroix
Nope. Protectli vault.
I have the same hardware for my test router.
His works, mine doesn't.

Might try his config on my protectli this weekend just to see if it'll work at my house.

michaellacroix

@jarhead Let us know your findings.

michaellacroix

@jarhead I wonder if frontier is making changes so their fiber offerings are compatible to all third party products.

stephenw10

Hmm, that's weird. Were you able to confirm they are actually using VLAN0 there?

Jarhead

@stephenw10
Yes. Plus, if they weren't, my router would have worked also.