Can you make a LACP LAGG with the Netgate 2100 ?
-
Can you make a LACP LAGG with the Netgate 2100 ? If so, what would the maximum througput be like compared to the Netgate 4100 ?
-
Not with the switch ports. You can do it by using the WAN port and one of the switch ports with the switch in port vlan mode but you cannot then use any of the other switch ports. So you would end up with just one interface lagg0. You could put VLANs over that router-on-a-stick style.
The throughput would not be improved though. If anything I would expect slightly reduced throughput because of the lagg overhead.Steve
-
Netgate 4100 it is then !
