devices login with captive portal authorization
-
My captive portal was working for a few days properly. Now when a new device is connected its not asking the authorization screen. it get connected directly.
-
That can happen, and depend on your configuration, like portal settings and network settings.
What does the captive portal status page show you ? -
@gertjan
Captive portal status shows only one user. All other devices get connected without captive portal login. I had created 15 users. all users where logged in, but when i connected a new device i found out that captive portal authorization screen is not working.My server centos provides the DHCP to pfsense. dns added is firewall gateway and 8.8.8.8
On routing gateways i have disabled "Disable Gateway Monitoring Action"
and monitor ip is 8.8.8.8. (This is because WAN get disconnected when there is a IP change from the service provider. So i have added this as a test) -
@jiss said in devices login with captive portal authorization:
Captive portal status shows only one user.
.... with an IP and MAC address.
And what is the IP and MAC of (the other) users that connect to your portal ?
What are the network settings of your captive portal interface ?
You've set up the DHCP server for this interface ? -
@jiss
One user is showed with IP and MAC address
All IP address are on the same subnet and IP .. 10.0.10.* and 10.0.20.*
Yes DHCP is setted. but its from my server not from pfsense
-
@jiss
You’ve checked that the dhcp server is handing out leases to your portal clients ? With the correct IP and DNS, both the IP of the pfsense LAN interface.Your portal uses the LAN interface ?
Btw : not related, but consider blocking IPV6 because the portal doesn’t handle IPV6. -
@gertjan DHCP server is leasing out to the clients. if not they wont get IP address. Here the IP address is correct and worked for a week.
i am using TP link realtec network card. is there any problem with it -
@jiss
Have a look at this Thread:
https://forum.netgate.com/topic/174416/captive-portal-is-broken/19Maybe you also have the Problem with the Limiters.... Like me