Netgate 1100 dns stops
-
I have no possibility to unplug it is that a problem? The device is hours away from me.
-
@freek_box If you click that doc page URL it's a known issue. It shouldn't affect normal operations but does affect packages and therefore upgrades. I believe it's just a one time fix though. I haven't had it recur on my 2100.
-
Unfortunately I know of no other way to reset that once it has entered that state. It will not be able to connect to the update repo until the crypto chip is reachable again.
-
@stephenw10 only rebooting is not enough?
-
@freek_box
Noop.
The 'crypto chip' van't be reset using a command.
A 10 seconds power down can bring it back online.edit : that is : a clean, commanded power down by the GUI or console(SSH),. Some ripping out the power and put it back in again could create other issues like a dirty file system.
So : console or SSH option 6.
Or GUI : Diagnostics > Halt System
Let the system shut down.
Then, remove the power for 10 seconds.
Power back in.
Done. -
@freek_box said in Netgate 1100 dns stops:
only rebooting is not enough?
It is not. The crypto chip remains powered as long as the PSU is connected to the device.
Steve
-
So how do I know if I'm on the correct version? I also have a VPS running with version:
-
@freek_box
You didn't notice it, way back in 2021, that this info
is refreshed every couple of hours or so.And then yours stopped refreshing for 18 months => not showing that you missed several major updates.
Like being on Windows 7, and don't know that 8, 8,1 and then 10 - and now 11 saw the light.Or look here : https://www.pfsense.org/download/
Or look here : https://www.netgate.com/blog/tag/releases
Or on the dashboard of pfSense itself :
No joke : never - ever - trust automated system
: you have to check (a couple of clicks actually) to see if a newer "version" is available.2.4.4 is .... ancient.
Check out Troubleshooting Upgrades.
-
@gertjan LOL I did not see that 2021 damm alright thnx!
-
I also have a old machine with pfsense on it see screenshot by switching it from branch it now sees it can be updated. Is this device safely to update to 2.5 I though there was something with this hardware that it could not run a newer version or something?
-
@freek_box That's not an 1100 I take it? It might be clearer to start a new thread for a different topic...
You might be thinking of AES-NI which Netgate originally planned to make required, but backed away from that 2-3 years ago.
-
Yes, you should be able to update that. It will probably end up going to 2.6 directly once you start the process. Be sure to backup the config in case you do need to reinstall.
Steve
-
So I tried to do the update from 2.4.4 to 2.4.5 but it got in an error. Now if I go to the update screen it says:
The error report:
[30-Sep-2022 07:43:55 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'readline.so' (tried: /usr/local/lib/php/20170718/readline.so (Shared object "libreadline.so.7" not found, required by "readline.so"), /usr/local/lib/php/20170718/readline.so.so (Cannot open "/usr/local/lib/php/20170718/readline.so.so")) in Unknown on line 0 -
You likely can't upgrade to 2.4.5 because there is no branch existing for that. The 'previous stable' branch is 2.5.2 at this point.
The only way to get to 2.4.5 would be to reinstall to it.That particular PHP error is known during upgrade and is not normally an issue. However it looks like it attempted and failed to upgrade to 2.4.5 so the current state is unknown.
You may be able to recover it as shown here:
https://docs.netgate.com/pfsense/en/latest/troubleshooting/upgrades.html#upgrade-not-offered-library-errorsIf you have the option though I would just install 22.05 clean and restore your config.
Steve
-
So maybe a stupid question but how would I install 22.05? Do I have to create a bootable USB or something?
-
If you want to reinstall cleanly then yes. Open a ticket with us to get the recovery image:
https://www.netgate.com/tac-support-requestAssuming this is still for an 1100 instructions are here:
https://docs.netgate.com/pfsense/en/latest/solutions/sg-1100/reinstall-pfsense.htmlSteve
-
-
No this is not for the 1100 but for the other machine,
I got it upgraded to 2.4.5:
But know I'm getting more php erros:
Warning: PHP Startup: Unable to load dynamic library 'curl.so' (tried: /usr/local/lib/php/20170718/curl.so (Shared object "libcurl.so.4" not found, required by "curl.so"), /usr/local/lib/php/20170718/curl.so.so (/usr/local/lib/php/20170718/curl.so.so: invalid file format)) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'mbstring.so' (tried: /usr/local/lib/php/20170718/mbstring.so (Shared object "libonig.so.5" not found, required by "mbstring.so"), /usr/local/lib/php/20170718/mbstring.so.so (/usr/local/lib/php/20170718/mbstring.so.so: invalid file format)) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'rrd.so' (tried: /usr/local/lib/php/20170718/rrd.so (Shared object "librrd.so.8" not found, required by "rrd.so"), /usr/local/lib/php/20170718/rrd.so.so (/usr/local/lib/php/20170718/rrd.so.so: invalid file format)) in Unknown on line 0
I can connect from my computer to it but can't go on the internet for some reason that is not working
When I do:
pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgradeI get the error:
Updating pfSense-core repository catalogue...
Certificate verification failed for /C=GB/ST=Greater Manchester/L=Salford/O=Comodo CA Limited/CN=AAA Certificate Services
12835124:error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed:/usr/local/poudriere/jails/pfSense_v2_4_5_amd64/usr/src/crypto/openssl/ssl/s3_clnt.c:1269: -
Ah the DNS resolver is not starting:
-
@freek_box said in Netgate 1100 dns stops:
No this is not for the 1100
That's why it's confusing to post multiple questions in one thread. :)
There are manuals online with instructions for other Netgate devices. Otherwise this is for CE, for your own hardware:
https://docs.netgate.com/pfsense/en/latest/install/index.html
