Netgate 2100 - setup question

rcoleman-netgate

@netboy Needs to be IOTP4 Network, not address.

netboy

This ok?

rcoleman-netgate

@netboy Should be. Plug into the IOTP4 network and try to access anything on the LAN network (pf GUI on that IP, ping, etc.)

it should block, and when you come back the

0 / 0 B

in the states column should increment.

netboy

@rcoleman-netgate Did not work - please see screen shot below

rcoleman-netgate

@netboy

Automatically Select == use the network based on the IP you're pinging. Switch that to "IOTP4"

netboy

@rcoleman-netgate

Able to ping after pointing source address to IOTP4

stephenw10

You should move that rule from the LAN interface to the IOTP4 interface.

Connections are opened from there and that's where they need to be blocked.

You probably also want the destination to be LANnet so that all hosts in the LAN subnet are blocked.
I would also choose to use a reject rule rather than block there so that clients on the IOTP4 subnet see the connection as refused imediately rather than having to timeout. It just makes failures easier to handle for devices mistakenly trying to access LAN.

You need to test it from a device on the IOTP4 subnet so that the traffic goes through the IOTP4 firewall rules.

Steve

netboy

This post is deleted!

netboy

@netboy OK

Removed BLOCK rule from LAN interface and included this

Shall I apply this and test?

stephenw10

That will work. I would set the protocol to 'any' though to include ping etc.

netboy

@stephenw10
This is what my firewall rules are now

Did a ping test and works - does not block!

stephenw10

Yeah, you have to test from a device in the IOP4 subnet. Pings generated from pfSense itself do not get filtered by those firewall rules. Only outbound rules would be applied and by default everything is allowed outbound.

Steve

netboy

@stephenw10

Looks like a SUCCESS!

Thank yo Stephenw10 and all others

netboy

@netboy Able to ping from 192 subnet to 172

I think I have to thank everybody in this forum. Netgate 2100 Max is a fantastic router though pricey.

I shall seek further help if need be.

Thank you everybody

netboy

@netboy I am documenting below "how I made my printers work over the network in windows 10"

My printers are in 172.16.0.XXX subnet and my computers are in 192.168.0.XXX subnet. 192.168.0.XXX can talk to (ALLOW) 172.16.0.XXX but not vice versa.

The first thing I did was connected my computer to 172 subnet and configure the printers.

I then connected my computers to 192 subnet and used the windows tool to configure TCP/IP printers and gave the "static" IP address of the printers and it worked.

netboy

@netboy I am back! I have one problem. Let me explain.

My NAS has 2 NIC's one on 192.168.0.XXX (PvT) subnet & another172.16.0.XXX (IoT) subnet.

Now I want to:

Create a GROUP with a List of MAC address that are in my 172.16.0.XXX (IoT) subnet hat can access my NAS (which is also in 172.16.0.XXX (IoT) ) [ MACgroupAllow ]
Firewall rule : ALLOW MACgroupAllow access to my NAS MAC XX.XX.XX.XX and
BLOCK all traffic within my subnet 172.16.0.XXX (IoT) in accessing my NAS MAC XX.XX.XX.XX

This is my existing firewall rules in IoT subnet

Does it make sense? I am not sure I have explained my functionality well .

stephenw10

That would need to be done on the NAS dircetly. Traffic between clients on the IoT subnet and the NAS IP address also in the IoT subnet does not go through pfSense, it just goes directly. So pfSense cannot filter it.

With that said pfSense is a layer 3 firewall so filtering MAC addresses (layer 2) is not something it's is setup to do. You can do something like that by setting fixed dhcp leases for each MAC and then filtering by those IPs. But only for traffic passing the firewall.

Steve

netboy

@stephenw10 OK got it!

Question.

I want to edit my Hostname and Description on certain MAC's listed under "DHCP Leases" - I am aware you can click the "pencil" icon to the right but I DO NOT want a static IP but only want to edit the Hostname and Description and maintaining the "non-static" nature. How do I go about doing it?

stephenw10

You can add a static lease entry without an IP address and it will just use a dynamic IP from the pool. But you end up with two lease entries like:

Screenshot from 2022-11-02 17-15-02.png

Steve

FSC830

In my DHCP leases the correct hostname is displayed, so I am wondering, why you want to modify the hostname entry in DHCP leases?
This sounds as all (or at least multiple) devices using the same hostname.
Therefore my approach would be to set the hostnames at the devices in a way so you can differ in DHCP leases which host is actually obtaining a lease.

Regards