Multiple static IP on different gateway
-
@stephenw10 Yes I realize that these IPs dont fall within the same subnet I think based on the calculations below. So I am assuming they cannot be routed
As you can see the range is from 123.176.56.X to 123.176.59.254.
So the static IPs 123.176.60.X and 123.176.62.X wont be routable via the gateway 123.176.59.1 I believe. Please let me know if i am understanding correctly ?
-
Yes, they cannot use the same gateway.
Hoe is the DSL modem configured here? Is it really a modem only? I assume you are not using PPPoE here?
Is the 'modem' itself acting as the gateway? -
@stephenw10 @stephenw10 The DSL modem has a fiber connection and it has 4 lan ports. One of the LAN port is configured into bridge mode which lands on the static IP confgured on pfSense WAN.
It might be possible to portmap the remaining 3 LAN into bridge mode as well and land them on seperate static IPs on any interface but that topology will mean I need multiple instances of pfSense I guess. I am trying to avoid that.
I dont know if a better idea would be to front the pfSense with a reverse proxy with different static IPs ... I am quite out of depth here.
-
@firewalled_lotusdew said in Multiple static IP on different gateway:
The DSL modem has a fiber connection
Like FTTC? If it's actually fiber to the modem that's not DSL.
Do you have access to the modem? Can you see what IP(s) it is using? It may not be if it really is bridging.Steve
-
@stephenw10 @stephenw10 @stephenw10 Yes FTTC - I have admin access to the modem. Its not using IP as its bridging.
PS: I am getting blocked from posting replies as its too frequent. Request to adjust my privileges if possible.
-
You have 5 rep now you should be able to post more frequently.
Can you see how the bridging is configured?
-
@stephenw10 Yes - attaching a snapshot of choices and currently set as bridge
-
Hmm, well the best thing there would be if you can get the ISP to provide static IPs in the same subnet, that share a gateway. Or route other IPs to your primary IP.
You might just try using them with the original gateway and see hat happens.
-
@firewalled_lotusdew Yeah I'd just put the VIPs on WAN and see what happens.
-
@derelict said in Multiple static IP on different gateway:
@firewalled_lotusdew Yeah I'd just put the VIPs on WAN and see what happens.
Exactly what I was going to chime in and say..
-
@chpalmer I have written to the ISP and asked them to reprovision the IP so that they are routable via a single gateway. Once that is done - I think its then trivial to alisas it via virtual IP.
-
@firewalled_lotusdew It might be trivial now. Try it.
