Please Help Me Under Stand! What The Issue IS.
-
@lawrence1986 so how much did your IP change, just the last octet, or some completely different range.
Very odd that ip Y works, but X does not.. If your whole IP range changed - it could point to a problem with the isp routing and not site blocking you.
Would be interesting to do a traceroute with it working, and then when it doesn't to see if actually get there via 1 address, but die somewhere early with the other.
Also curious to know if with the different IP if your still seeing disconnections or high packet loss in pfsense via dpinger?
-
@johnpoz I just switched interfaces like someone said then went to pfsense and just switched the wires
-
@lawrence1986 yeah that is what I said to do ;) What I am asking is how much did the wan IP change.. just by say the last number - or is it completely different range.
-
@stephenw10 The other question for yall is: Should I upgrade the modems to the new and improved DOCSIS 3.1?
-
@johnpoz 24.236.182.222 to 24.xxx.xxx.18 it jumped quite a bite
-
@lawrence1986 said in Please Help Me Under Stand! What The Issue IS.:
Should I upgrade the modems to the new and improved DOCSIS 3.1?
What speeds do you pay for - do you rent or own your modem? While docsis 3.1 is current, and most isp should really be changing out all the older 3.0 ones.
If your on a low speed connection, its not going to make much difference from your point of view. If you pay for 100/10 and you get 100/10 there would be little reason for you to change it out. Now if you pay for gig/X and your not seeing gig/X then yeah a change could help.
But then again - do you just rent it from your isp, or did you buy it out of pocket?
-
@lawrence1986 with such a change - that could be related to an ISP routing issue then, and not the site actually blocking you.
You might want to bring up the issue with your isp..
-
@johnpoz It's a spectrum, they can give two fucks without trying to be mean, but they don't care, they sell their own shit, and they'll also tell you that any brand of Walmart router won't work, but I've had so many brands over the years that it's crazy how I know PFSense should work and when it doesn't, I'm like fuck all.
-
@johnpoz But since we're still talking, I'm trying to route all my traffic from pfsense to my adguard.
-
@lawrence1986 So you're running a firewall appliance for businesses and your own adguard home and you can't make screenshots on your computer? How come?
-
@lawrence1986 said in Please Help Me Under Stand! What The Issue IS.:
I'm trying to route all my traffic from pfsense to my adguard.
That would be just a dns forward if you want clients that ask pfsense for dns, and you want pfsense to ask adguard dns.
-
@bob-dig It's always been a thing. Besides, I have three monitors, and I'm the same with Discord. I learned through doing and repeating. I have no ideal, and I was born like this. My dad was the same way. My dad couldn't read or write. He could, however, rebuild small engines and high-horsepower cars without a college degree in the 1970s and 2000s. My mom, on the other hand, could read and write and had all the good habits that my dad didn't have. I really can't explain it. It's just always been a thing. I never let it slow me down, though.
-
@bob-dig I have DNS forward enabled, Register DHCP leases in DNS forwarder, Query DNS servers sequentially,Interfaces,all
-
I would stick with the modem you have unless you're seeing some issue with the connection that can tie to a modem issue specifically. I would stay with it for a while anyway just to make sure what issues there might be. There may be none.
Steve
-
@stephenw10 Ok, I'll hold off for a while on that ideal. I'm attempting to set up ad guard, but it's not working on top clients. I see my pfSense box, but not all traffic is routed through just that IP, which should be 10.0.10.1, and where it says "top clients," it shows different addresses on the network. How do I make them go away and only have 10.0.10.1? the last time I had this going a friend helped me but I wasn't paying any attention I remember him using DNS forwarder and DNS Server Settings and the DHCP server side under Servers
-
@lawrence1986 I got AdGuard working as well. It took some trial and error, but it's working none the less. I also bought a 20$ thin client as well, because right now AdGuard is on my unraid server, and if my server goes down, so does my AdGuard/internet
-
I've never used Adguard so I can;t comment on the specifics there but if it's just DNS filetering then I'd expect to just set the DNS resolver in pfSense to forwarding mode and enter the Adguard IP in Sys > General Setup. Of course that will filter queries from pfSense itself too.
I just use pfBlocker on pfSense itself to do that.Steve
