No different ips from pfsense at vlans
-
Sounds like you might have your Cisco misconfigured.
-
@volume said in No different ips from pfsense at vlans:
Ich habe VLANs auf pfsense erstellt
have you configured the VLANs on the Switch, too?
-
Hi yes i did. Vlans from the switch seems to be ok. If i disconnect pfsense the vlans will work only from the switch. I don't know if this is the right way.
-
@volume Get a screenshot of your Interfaces->Assignments .... VLANs tab and post it here.
-
-
@volume said in No different ips from pfsense at vlans:
Hi yes i did. Vlans from the switch seems to be ok. If i disconnect pfsense the vlans will work only from the switch. I don't know if this is the right way.
So is the switch handling the vlan layer 3?
What does that mean, "vlans work only from the switch"? -
@jarhead yes that's i understand
-
@volume Can you post images of the switch config?
-
@jarhead another question : from my vlans i have access to the web view of the switch only from the default vlan how can i have from the vlan i want?
at the moment i have to make some changes at the cables it is not very easy accessible. i will do and send -
@volume
Let's see the switch config first.
You need to figure out where you want the layer 3 to be, either pfSense or the switch, can't have them both.
But there's still no confirmation of how you have anything config'd in the switch.
Post those images first. -
@jarhead And when you do there's no need to redact interface names or internal MAC addresses... public IPs, FQDNs, usernames? Sure.
