Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NFS Server WAN - mount within opnsense(pfsense) LAN

    Firewalling
    3
    27
    1.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      leonidas-o @Cool_Corona
      last edited by

      @cool_corona no, still not working. I tried what you said, I also tried actually every combination which came to my mind.
      WAN/ LAN, keeping the source, removing it, setting destination/ removing it, changing the translation address from "Interface Address" to the public IP of the proxmox server.

      It's crazy how I can't/ or I don't know how, view any logs with some proper messages. The firewall system logs are not showing anything blocking.

      Screenshot 2022-12-08 at 23.19.57.png

      L 1 Reply Last reply Reply Quote 0
      • L
        leonidas-o @leonidas-o
        last edited by leonidas-o

        I've set the "Static Port" checkbox and immediately it worked. The mount was successful and I could see the files.

        What does this checkbox really mean or better to say, what consequences do I have when it is checked?

        bmeeksB 1 Reply Last reply Reply Quote 1
        • bmeeksB
          bmeeks
          last edited by

          Here is a long thread about NFS and pfSense. It mentions that both NAT ports and the pfSense IP figure into the equation: https://www.experts-exchange.com/questions/29118882/nfsv4-mount-fails-with-operation-not-permitted.html. I found this link by specifically searching for nfs getattr operation not permitted as that is the error you saw in your packet capture.

          The "operation not permitted" error says to me it is a server-side permissions issue of some sort. Further evidence it may be a server-side issue can be found here: https://serverfault.com/questions/577342/nfsv4-through-portforward. I think the port translations that are happening with the intervening OPNsense or pfSense firewalls are the culprit.

          1 Reply Last reply Reply Quote 1
          • bmeeksB
            bmeeks @leonidas-o
            last edited by bmeeks

            @leonidas-o said in NFS Server WAN - mount within opnsense(pfsense) LAN:

            I've set the "Static Port" checkbox and immediately it worked. The mount was successful and I could see the files.

            What does this checkbox really mean or better to say, what consequences do I have when it is checked?

            Read the last link I posted in a reply above. I think it answers your question. pfSense is altering the port number as part of NAT, and that trips up NFS on the server side. Clicking Static Port says "don't mess with the source port". You could also try unchecking "Static Port" and trying the insecure option on the export setting on the server side to see if that works as well.

            L 1 Reply Last reply Reply Quote 1
            • L
              leonidas-o @bmeeks
              last edited by leonidas-o

              @bmeeks Yes, I will read both links thanks for that.

              Are there any downsides to using the "Static Port" option?

              I read about the nfs insecure option, it doesn't sound if it would be related to my port issue, but I will try it anyway.
              I saw in the packet capture, always something like "136.XX.XX.XX.2049 > 10.10.10.2.18318". So a random high Port.

              Now with the static port option it changed to "136.XX.XX.XX.2049 > 10.10.10.2.1009".
              But I'm also seeing "10.10.10.2.812 > 136.XX.XX.XX.2049" and "136.XX.XX.XX.2049 > 10.10.10.2.812".

              I don't know, maybe a stupid question, can I face any performance issues, when all my VM's are running with this static port option? Somehow the traffic from all VM's jamming at the same port?

              L 1 Reply Last reply Reply Quote 0
              • L
                leonidas-o @leonidas-o
                last edited by

                a quick followup regarding the "insecure" option, I have two mounts, one is owned by "root" on the nfs server the other by a regular user.
                After using the "insecure" flag and removing the "static port" option, in my VM (nfs client), as a regular linux user, I can see the files from the one mount which was owned by root but not the other mount. So yes, somehow the "insecure" option has an influence on that. Although I don't why I'm just seeing the "root" owned nfs mounted files.

                bmeeksB 1 Reply Last reply Reply Quote 0
                • bmeeksB
                  bmeeks @leonidas-o
                  last edited by bmeeks

                  @leonidas-o said in NFS Server WAN - mount within opnsense(pfsense) LAN:

                  a quick followup regarding the "insecure" option, I have two mounts, one is owned by "root" on the nfs server the other by a regular user.
                  After using the "insecure" flag and removing the "static port" option, in my VM (nfs client), as a regular linux user, I can see the files from the one mount which was owned by root but not the other mount. So yes, somehow the "insecure" option has an influence on that. Although I don't why I'm just seeing the "root" owned nfs mounted files.

                  Your solution is likely to require some changes on the NFS server side in its export options. As I understand it from quickly reviewing the links I provided, NFS by default expects certain authentication communications to occur on "secure" ports. NFS considers port numbers below 1024 as "secure" (don't really know why that is). The port translation associated with NAT across the FreeBSD firewalls (whether OPNsense or pfSense) causes the NFS server to see authentication communication happening on a port higher than 1024, thus it rejects it. That is the source of the "operation not permitted" error.

                  Another piece of the puzzle is who owns the mounted file system (root or someone else). That figures into the remote mounting. The first link I provided has some information about that as you read down the long thread. Something like fsid=root or something similar is required in the export configuration file. This root thing is probably why one mount works and another is giving trouble on the remote end.

                  The Static Port option tells the firewall to always use the same low-numbered port for NAT. So long as that port is less than 1024, you get around the "not secure" error from NFS. The workaround for not using the Static Port option is to use the insecure option in the export specification for the NFS share.

                  L 1 Reply Last reply Reply Quote 0
                  • L
                    leonidas-o @bmeeks
                    last edited by

                    @bmeeks hmm, I once tried that "fsid=" option on the nfs server a week ago. I had "fsid=0" for the one path owned by root and fsid=1000 for the other path owned by the regular user. This option however broke all the clients. Don't know why, don't know If I have to adapt the clients as well if adding this "fsid" flag, but no nfs client was working anymore. So I quickly removed it and all clients worked again.

                    I'm currently reading through the longer thread.

                    Do you have a recommendation, or maybe just a feeling what might be better, "insecure" or "static port"?

                    bmeeksB 1 Reply Last reply Reply Quote 0
                    • bmeeksB
                      bmeeks @leonidas-o
                      last edited by bmeeks

                      @leonidas-o said in NFS Server WAN - mount within opnsense(pfsense) LAN:

                      Do you have a recommendation, or maybe just a feeling what might be better, "insecure" or "static port"?

                      I would gravitate towards the "insecure" option in the NFS setup. Here is a description of what the Static Port option is all about from the official Netgate documentation: https://docs.netgate.com/pfsense/en/latest/nat/outbound.html#static-port. Short answer is Static Port can ever so slightly reduce security by making spoofing of traffic easier.

                      What is tripping up your NFS mounting across the firewall is the source port randomization the firewall does when applying NAT to the NFS traffic.

                      If you follow the link in the docs to Working with Manual Outbound NAT Rules, and then scroll down a bit, you will find a good description of what Static Port does and why it is making your NFS mounts work. The NFS server is not happy when the source port is rewritten UNLESS the insecure option has been enabled in the NFS export options.

                      The trouble you have had with NFS (and the similar kinds of trouble that frequently happen trying to get VoIP and SIP working across firewalls) is why NAT is considered such an abomination among network purists ... 😀.

                      pfSense and OPNsense are trying to improve security by randomizing source ports when NAT'ing, but some applications just do not tolerate that. Figuring out what the problem is can sometimes be difficult.

                      L 1 Reply Last reply Reply Quote 0
                      • L
                        leonidas-o @bmeeks
                        last edited by

                        @bmeeks was about to read the static port section in the pfsense docs, had it already open.
                        So @bmeeks and @Cool_Corona thank you very much guys, you provided lots of insights and useful information, help and hints. I really appreciate that.

                        I think I can figure out now, what the best option will be. I will go through all the threads/links, read up on fsid again and figure out a solution. At least I do have a "running" example of a nfs mount behind pfsense. So I can research on all the options now. Thanks a lot!

                        The trouble you have had with NFS (and the similar kinds of trouble that frequently happen trying to get VoIP and SIP working across firewalls) is why NAT is considered such an abomination among network purists ...

                        I "heard" there is no NAT in IPv6 maybe we all just should switch to IPv6, no more NAT'ing, problem solved 😋
                        Okay, quickly googled it, it seems there is NAT for ipv6, so forget what I said 😇

                        bmeeksB 1 Reply Last reply Reply Quote 0
                        • bmeeksB
                          bmeeks @leonidas-o
                          last edited by

                          @leonidas-o said in NFS Server WAN - mount within opnsense(pfsense) LAN:

                          Okay, quickly googled it, it seems there is NAT for ipv6, so forget what I said

                          There is NAT for IPv6, but no network admin in his right mind should want to use it. Hopefully it remains a solution in search of a problem. There are enough IPv6 addresses to last until the end of the universe.

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post